Ibm THINKPAD T60 Manual

ThinkPad® T60

Service and Troubleshooting Guide

Includes:

vIntroduction to other sources of information

vImportant tips for taking care of your computer

vDiagnostics and troubleshooting

vRecovery options

vHelp and service

vWarranty information for your computer

ThinkPad® T60

Service and Troubleshooting Guide

Note

Before using this information and the product it supports, be sure to read the following:

vSafety and Warranty Guide included in the package with this publication.

vAppendix D, “Wireless related information,” on page 75 and Appendix E, “Notices,” on page 77.

vThinkPad Regulatory Notice included in the package with this publication.

Second Edition (June 2006)

© Copyright Lenovo 2006. All rights reserved.

U.S. GOVERNMENT USERS – RESTRICTED RIGHTS: Our products and/or services are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to the GSA ADP Schedule contract with Lenovo Group Limited, if any, or the standard terms of this commercial license, or if the agency is unable to accept this Program under these terms, then we provide this Program under the provisions set forth in Commercial Computer Software–Restricted Rights at FAR 52.227-19, when applicable, or under Rights in Data-General, FAR 52.227.14 (Alternate III).

Contents

Read first . . . . . . . . . . . . . v

Chapter 7. Upgrading and replacing

Chapter 1. Finding information . . . .

This guide and other publications . . . .

Finding information with the ThinkVantage button . . . . . . . . . . . . .

		devices . . . . . . . . . . . .	.	45
.	1	Replacing the battery . . . . . . . .	.	45
. 1		Upgrading the hard disk drive . . . . .	. 46
		Replacing memory . . . . . . . . .	.	49
.	2

					Chapter 8. Getting help and service . .	.	57
Chapter 2. Caring for your ThinkPad					Getting help and service . . . . . . .	.	57
computer . . . . . . . . . . .	.	.		3	Getting help on the Web . . . . . . .	.	57
					Calling the Customer Support Center . .	. 57
Chapter 3. Solving computer problems	.	. 7			Getting help around the world . . . . .	. 59
Frequently asked questions . . . . .	.	.		8	Appendix A. Warranty information . . .	. 61
Diagnosing problems . . . . . . .	.	.		9
Troubleshooting . . . . . . . . .	.	.		10	Warranty Information . . . . . . . .	.	61
Error messages . . . . . . . .	.	.		10	Warranty Period . . . . . . . .	.	61
Errors without messages . . . . .	.	.		14	Types of Warranty Service . . . . .	.	62
A password problem . . . . . .	.	.		16	Worldwide telephone list. . . . . .	.	64
A power switch problem . . . . .	.	. 17			Appendix B. Customer Replaceable Units
Keyboard problems . . . . . .	.	.		17
UltraNav problems. . . . . . .	.	.		18	(CRUs) . . . . . . . . . . . .	.	69
Standby or hibernation problems . .	.	. 19
Computer screen problems . . . .	.	. 22			Appendix C. Overview of your ThinkPad
Battery problems . . . . . . .	.	.		24	computer . . . . . . . . . . .	.	71
Hard disk drive problems . . . .	.	. 25			Your ThinkPad at a glance . . . . . .	.	71
A startup problem . . . . . . .	.	.		25	Features . . . . . . . . . . . . . 73
Fingerprint authentication problems .	.	.		26	Specifications . . . . . . . . . .	.	74
Other problems . . . . . . . .	.	.		27
Chapter 4. Starting BIOS Setup Utility	.	.	31		Appendix D. Wireless related information		75
					Wireless interoperability . . . . . . .	.	75
Chapter 5. Installing a new operating					Usage environment and your health . . . . 75
system . . . . . . . . . . .	.	.	33		Appendix E. Notices. . . . . . . .	.	77
Installing Windows XP . . . . . .	.	.		33	Notices. . . . . . . . . . . . . . 77
Installing the Windows XP Update Module					Television output notice . . . . . .	. 78
Package . . . . . . . . . .	.	.		36	Electronic emissions notices . . . . . .	.	78
Installing Windows 2000 . . . . . .	.	. 37			Federal Communications Commission
TI CardBus Controller Support. . .	.	.		41	(FCC) Statement . . . . . . . .	.	78
Installing the Windows 2000 Update					Industry Canada Class B emission
Module Package . . . . . . .	.	.		41	compliance statement . . . . . . .	.	79
Chapter 6. Recovery options . . . .	.	.	43		Avis de conformité à la réglementation
					d’Industrie Canada. . . . . . . .	.	79
Introducing Rescue and Recovery . . .	.	. 43			European Union EMC Directive
Restoring factory contents . . . . .	.	.		43	conformance statement . . . . . .	.	79
Recovering data. . . . . . . . .	.	.		44	Environmental notices for Japan . . . .	.	80

© Copyright Lenovo 2006

iii

Important information for the European			Index . . . . . . . . . . . . . . 87
Directive 2002/96/EC . . . . . . .	.	.	81
IBM Lotus Software Offer . . . . .	.	.	82
Trademarks . . . . . . . . . .	.	.	84

iv ThinkPad® T60 Service and Troubleshooting Guide

Read first

To prevent damage to the hard disk and subsequent data loss, before moving your ThinkPad computer, press Fn+F4 to put it in standby mode or turn it off. Make sure that the standby status indicator is on (is green) before moving the computer.

Do not drop, bump, scratch, twist, hit, vibrate, push or place heavy objects on your computer, display, or external devices.

Use a quality carrying case that provides adequate cushion and protection. Do not pack your computer in a tightly packed suitcase or bag.

Place liquids away from your computer to avoid spills, and keep your computer away from water to avoid the danger of electrical shock.

Avoid leaving the base of your computer in contact with your lap or any part of your body for an extended period when the computer is turned on or when the battery is charging.

© Copyright Lenovo 2006

v

Read first

vi ThinkPad® T60 Service and Troubleshooting Guide

Chapter 1. Finding information

This guide and other publications

Setup Instructions

helps you to unpack your ThinkPad computer and get started. It includes a few tips for first-time users, and introduces software preinstalled by Lenovo.

This Service and Troubleshooting Guide

provides information about caring for your ThinkPad computer, basic troubleshooting information, some recovery procedures, help and service information, and warranty information for your computer. The troubleshooting information in this Guide applies only to problems that might prevent you from accessing the comprehensive help and information portal, called ThinkVantage Productivity Center, preloaded on your ThinkPad computer.

Access Help

is a comprehensive online manual that provides answers to most of your questions about your computer, helps you to configure preloaded features and tools, or solve problems. To open Access Help, click Start, move the pointer to All Programs (in Windows® other than Windows XP, Programs); then to ThinkVantage. Click Access Help.

ThinkVantage Productivity Center

provides an easy access to software tools and key Lenovo sites, eliminating the need to carry other reference manuals around. To open ThinkVantage Productivity Center, press the ThinkVantage button on your keyboard. For more information about using the ThinkVantage button, see“Finding information with the ThinkVantage button” on page 2.

Safety and Warranty Guide

includes general safety instructions and complete Lenovo Statement of

Limited Warranty.

Regulatory Notice

supplements this Guide. Read it before you use the wireless features of your ThinkPad computer. The ThinkPad computer complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. You are requested to install and use your ThinkPad computer in strict accordance with the local RF regulations.

© Copyright Lenovo 2006

1

Finding information

Finding information with the ThinkVantage button

The blue ThinkVantage button can help you in many situations when your computer is working normally, and even when it is not. Press the ThinkVantage button to open the ThinkVantage Productivity Center and get access to informative illustrations and easy-to-follow instructions for getting started and staying productive.

You can also use the ThinkVantage button to interrupt the startup sequence of your computer and start the ThinkVantage Rescue and Recovery workspace, which runs independently of the Windows operating system and is hidden from it.

2 ThinkPad® T60 Service and Troubleshooting Guide

Chapter 2. Caring for your ThinkPad computer

Though your computer is designed to function reliably in normal work environments, you need to use common sense in handling it. By following these important tips, you will get the most use and enjoyment out of your computer.

Important tips:

Be careful about where and how you work

vDo not leave the base of your computer in contact with your lap or any part of your body for an extended period when the computer is functioning or when the battery is charging. Your computer dissipates some heat during normal operation. This heat is a function of the level of system activity and battery charge level. Extended contact with your body, even through clothing, could cause discomfort or, eventually, a skin burn.

vPlace liquids away from your computer to avoid spills, and keep your computer away from water (to avoid the danger of electrical shock).

vStore packing materials safely out of the reach of children to prevent the risk of suffocation from plastic bags.

vKeep your computer away from magnets, activated cellular phones, electrical appliances, or speakers (within 13 cm/5 in).

vAvoid subjecting your computer to extreme temperatures (below 5°C/41°F or above 35°C/95°F).

Be gentle with your computer

vAvoid placing any objects (including paper) between the display and the keyboard or under the keyboard.

vDo not drop, bump, scratch, twist, hit, vibrate, push, or place heavy objects on your computer, display, or external devices.

vYour computer display is designed to be opened and used at an angle slightly greater than 90 degrees. Do not open the display beyond 180 degrees, as this might damage the computer hinge.

Carry your computer properly

vBefore moving your computer, be sure to remove any media, turn off attached devices, and disconnect cords and cables.

vBe sure your computer is in standby or hibernation mode, or turned off, before moving it. This will prevent damage to the hard disk drive and data loss.

© Copyright Lenovo 2006

3

Caring for your ThinkPad computer

vWhen picking up your open computer, hold it by the bottom. Do not pick up or hold your computer by the display.

vUse a quality carrying case that provides adequate cushion and protection. Do not pack your computer in a tightly packed suitcase or bag.

Handle storage media and drives properly

vAvoid inserting diskettes at an angle and attaching multiple or loose diskette labels, as these can lodge in the drive.

vIf your computer comes with an optical drive such as CD, DVD, or CD-RW/DVD drive, do not touch the surface of a disc or the lens on the tray.

vWait until you hear the CD or DVD click into the center pivot of an optical drive such as CD, DVD, or CD-RW/DVD drive before closing the tray.

vWhen installing your hard disk, diskette, CD, DVD, or CD-RW/DVD drive, follow the instructions shipped with your hardware, and apply pressure only where needed on the device.

Take care in setting passwords

vRemember your passwords. If you forget a supervisor or hard disk password, Lenovo authorized service provider will not reset it, and you might have to replace your system board or hard disk drive.

Other important tips

vYour computer modem might use only an analog telephone network, or public-switched telephone network (PSTN). Do not connect the modem to a PBX (private branch exchange) or any other digital telephone extension line because this could damage your modem. Analog phone lines are often used in homes, while digital phone lines are often used in hotels or office buildings. If you are not sure which kind of phone line you are using, contact your telephone company.

vYour computer might have both an Ethernet connector and a modem connector. If so, be sure to connect your communication cable to the correct one, so your connector is not damaged.

vRegister your ThinkPad products with Lenovo (refer to the Web page: www.lenovo.com/register). This can help authorities return your computer to you if it is lost or stolen. Registering your computer also enables Lenovo to notify you about possible technical information and upgrades.

vOnly an authorized ThinkPad repair technician should disassemble and repair your computer.

vDo not modify or tape the latches to keep the display open or closed.

vTake care not to turn your computer over while the ac adapter is plugged in. This could break the adapter plug.

4 ThinkPad® T60 Service and Troubleshooting Guide

Caring for your ThinkPad computer

vTurn off your computer if you are replacing a device in a device bay, or else verify that the device is warmor hot-swappable.

vIf you exchange drives in your computer, reinstall the plastic bezel faces (if supplied).

vStore your external and removable hard disk, diskette, CD, DVD, and CD-RW/DVD drives in the appropriate containers or packaging when they are not being used.

vBefore you install any of the following devices, touch a metal table or a grounded metal object. This action reduces any static electricity from your body. The static electricity could damage the device.

–PC Card

–Smart Card

–Memory Card, such as SD Card, Memory Stick, and MultiMediaCard

–Memory module

–PCI Expess Mini Card

–Communication Daughter Card

Cleaning the cover of your computer

Occasionally clean your computer as follows:

1.Prepare a mixture of a gentle kitchen-use detergent (one that does not contain abrasive powder or strong chemicals such as acid or alkaline). Use 5 parts water to 1 part detergent.

2.Absorb the diluted detergent into a sponge.

3.Squeeze excess liquid from the sponge.

4.Wipe the cover with the sponge, using a circular motion and taking care not to let any excess liquid drip.

5.Wipe the surface to remove the detergent.

6.Rinse the sponge with clean running water.

7.Wipe the cover with the clean sponge.

8.Wipe the surface again with a dry, soft lint-free cloth.

9.Wait for the surface to dry completely and remove any cloth fibers from the computer surface.

Cleaning your computer keyboard

1.Absorb some isopropyl rubbing alcohol on a soft, dust-free cloth.

2.Wipe each keytop surface with the cloth. Wipe the keys one by one; if you wipe several keys at a time, the cloth may hook onto an adjacent key and possibly damage it. Make sure that no liquid drips onto or between the keys.

3.Allow to dry.

Chapter 2. Caring for your ThinkPad computer 5

Caring for your ThinkPad computer

4.To remove any crumbs and dust from beneath the keys, you can use a camera blower with a brush or cool air from a hair drier.

Note: Avoid spraying cleaner directly on the display or the keyboard.

Cleaning your computer display

1.Gently wipe the display with a dry, soft lint-free cloth. If you see a scratchlike mark on your display, it might be a stain transferred from the keyboard or the TrackPoint pointing stick when the cover was pressed from the outside.

2.Wipe or dust the stain gently with a soft, dry cloth.

3.If the stain remains, moisten a soft, lint-free cloth with water or a 50-50 mixture of isopropyl alcohol and water that does not contain impurities.

4.Wring out as much of the liquid as you can.

5.Wipe the display again; do not let any liquid drip into the computer.

6.Be sure to dry the display before closing it.

Care for the fingerprint reader

The following actions could damage the fingerprint reader or cause it not to work properly:

vScratching the surface of the reader with a hard, pointed object.

vScraping the surface of the reader with your nail or anything hard.

vUsing or touching the reader with a dirty finger.

If you notice any of the following conditions, gently clean the surface of the reader with a dry, soft, lint-free cloth:

vThe surface of the reader is dirty or stained.

vThe surface of the reader is wet.

vThe reader often fails to enroll or authenticate your fingerprint.

6 ThinkPad® T60 Service and Troubleshooting Guide

Chapter 3. Solving computer problems

Frequently asked questions . . .	. . .	.	8	UltraNav problems. . . . . . .	.	.	18
Diagnosing problems . . . . .	. . .	.	9	Standby or hibernation problems . .	.	. 19
Troubleshooting . . . . . . . . . . . 10				Computer screen problems . . . .	.	.	22
Error messages . . . . . . .	. .	.	10	Battery problems . . . . . . .	.	.	24
Errors without messages . . . .	. .	.	14	Hard disk drive problems . . . .	.	.	25
A password problem . . . . .	. .	.	16	A startup problem . . . . . . .	.	.	25
A power switch problem . . . .	. .	. 17		Fingerprint authentication problems .	.	. 26
Keyboard problems . . . . .	. .	.	17	Other problems . . . . . . . .	.	.	27

© Copyright Lenovo 2006

7

Solving computer problems

Frequently asked questions

This section lists frequently asked questions and tells where you can find detailed answers. For details about each publication included in the package with the ThinkPad computer, see “This guide and other publications” on page 1.

What safety precautions should I follow when using my ThinkPad computer?

See the separate Safety and Warranty Guide for detailed information about safety.

How can I prevent problems with my ThinkPad computer?

See “Read first” on page v, and also Chapter 2, “Caring for your ThinkPad computer,” on page 3 of this Guide. More tips can be found in the following sections of Access Help:

vPreventing problems

vSpills on the keyboard

What are the main hardware features of my new ThinkPad computer?

See the “ThinkPad tour” section of Access Help.

Where can I find the detailed specifications for my machine?

See www.lenovo.com/think/support

I need to upgrade a device or I need to replace one of the following: the hard disk drive, the PCI Express Mini Card, the Modem Daughter Card, memory, the keyboard, or the palm rest.

Refer to Appendix B, “Customer Replaceable Units (CRUs),” on page 69 of this Guide for the list of Customer Replaceable Units and the location of the instructions for removing or replacing components.

8 ThinkPad® T60 Service and Troubleshooting Guide

Solving computer problems

My computer is not operating properly.

Study the “Problem solving ” section of Access Help. This Guide describes only problems that might prevent you from getting access to the online help system.

Where are the recovery CDs?

No recovery CD or a Windows CD is provided with your computer originally. For explanation of the alternative recovery methods offered by Lenovo, see “Restoring factory contents” on page 43 of this Guide.

How can I contact the Customer Support Center?

See Chapter 8, “Getting help and service,” on page 57 of this Guide. For the phone numbers of the Customer Support Center nearest to you, see “Worldwide telephone list” on page 64.

Where can I find warranty information?

See the separate Safety and Warranty Guide for detailed warranty information. For the warranty applicable to your Machine, including the warranty period and type of warranty service, see “Warranty Information” on page 61.

Diagnosing problems

If you have a problem with your computer, you can test it by using PC-Doctor® for Windows. To run PC-Doctor for Windows, do as follows:

1.Click Start.

2.Move the pointer to All Programs (in Windows other than Windows XP,

Programs) and then to PC-Doctor for Windows.

3.Click PC-Doctor.

For more information about PC-Doctor for Windows, see the Help for the program.

Attention

Running any tests may take up to several minutes or longer. Make sure you have time to run the entire test; do not interrupt the test while it is running.

If you are preparing to contact the Customer Support Center, be sure to print the test log so that you can rapidly provide information to the help technician.

Chapter 3. Solving computer problems 9

Solving computer problems

Troubleshooting

If you do not find your problem here, refer to Access Help, your on-board help system. The following section only describes problems that might prevent you from accessing this help system.

Error messages

Notes:

1.In the charts, x can be any character.

2.The version of PC-Doctor referred to here is PC-Doctor for Windows.

Message	Solution
0175: Bad CRC1, stop	The EEPROM checksum is not correct (block #6). Have the computer
POST task	serviced.
0176: System Security -	This message is displayed if you remove the Security Chip and reinstall it,
The System has been	or install a new one. To clear the error, enter the BIOS Setup Utility. If this
tampered with.	does not solve the problem, have the computer serviced.
0177: Bad SVP data, stop	Checksum of the supervisor password in the EEPROM is not correct. The
POST task.	system board should be replaced. Have the computer serviced.
0182: Bad CRC2. Enter	Checksum of the CRC2 setting in the EEPROM is not correct. Go to BIOS
BIOS Setup and load	Setup Utility. Press F9 and then Enter to load the default setting. Press F10
Setup defaults.	and then Enter to restart the system.
0185: Bad startup	Checksum of the startup sequence setting in the EEPROM is not correct. Go
sequence settings. Enter	to BIOS Setup Utility. Press F9 and then Enter to load the default setting.
BIOS Setup and load	Press F10 and then Enter to restart the system.
Setup defaults.
0187: EAIA data access	The access to EEPROM has failed. Have the computer serviced.
error
0188: Invalid RFID	The EEPROM checksum is not correct (block # 0 and 1). The system board
Serialization Information	should be replaced, and the box serial number needs to be reinstalled. Have
Area.	the computer serviced.
0189: Invalid RFID	The EEPROM checksum is not correct (block # 4 and 5). The system board
configuration	should be replaced, and the UUID needs to be reinstalled. Have the
information area	computer serviced.
0190: Critical low-battery	The computer turned off because the battery is low. Connect the ac adapter
error	to the computer and charge the battery, or replace the battery with a fully
	charged one.
0191: System Security -	The system configuration change has failed. Confirm the operation and try
Invalid remote change	again. To clear the error, enter the BIOS Setup Utility.
requested.
0192: System Security -	The Security Chip has been replaced with a different one. Have the
Embedded Security	computer serviced.
hardware tamper
detected.

10 ThinkPad® T60 Service and Troubleshooting Guide

	Solving computer problems
Message	Solution
0199: System Security -	This message is displayed if you enter a wrong supervisor password more
Security password retry	than three times. Confirm the supervisor password and try again. To clear
count exceeded.	the error, enter the BIOS Setup Utility.
01C8: More than one	Remove a Modem Card. Otherwise, press Esc to ignore the warning
modem devices are	message. If it does not solve this problem, have the computer serviced.
found. Remove one of
them. Press <Esc> to
continue.
01C9: More than one	Your ThinkPad computer has a built-in Ethernet feature, and you cannot
Ethernet devices are	add another such feature by installing an Ethernet device. If this error
found. Remove one of	message is displayed, remove the Ethernet device that you installed.
them. Press <Esc> to	Otherwise press Esc to ignore the warning message. If this does not solve
continue.	the problem, have the computer serviced.
0200: Hard disk error	The hard disk is not working. Make sure that the hard disk drive is attached
	firmly. Run the BIOS Setup Utility; then make sure the hard disk drive is not
	disabled in the Startup menu.
021x: Keyboard error	Make sure that there are no objects placed on the keyboard, or if you have
	one, the external keyboard. Turn off the computer, and turn off all attached
	devices. Turn on the computer first; then turn on the attached devices.
	If you still see the same error code, do the following:
	If an external keyboard is connected, do the following:
	v Turn off the computer and disconnect the external keyboard; then turn on
	the computer. Make sure that the built-in keyboard operates correctly. If it
	does, have the external keyboard serviced.
	v Make sure that the external keyboard is connected to the correct
	connector.
	Test the computer by using PC-Doctor.
	v If the computer stops during the test, have the computer serviced.
0230: Shadow RAM error	The shadow RAM failed. Test your computer’s memory with PC-Doctor. If
	you added a memory module just before turning the computer on, reinstall
	it. Then test the memory with PC-Doctor.
0231: System RAM error	The system RAM failed. Test your computer’s memory with PC-Doctor. If
	you added a memory module just before turning the computer on, reinstall
	it. Then test the memory with PC-Doctor.
0232: Extended RAM	The extended RAM failed. Test your computer’s memory with PC-Doctor. If
error	you have increased memory just before turning the computer on, reinstall it.
	Then test the memory with PC-Doctor.
0250: System battery	The backup battery, which is used to preserve the configuration information,
error	such as the date and time, while the computer is turned off, is depleted.
	Replace the battery and run BIOS Setup Utility to verify the configuration. If
	you still have a problem, have the computer serviced.

Chapter 3. Solving computer problems 11

Solving computer problems

Message	Solution
0251: System CMOS	The system CMOS might have been corrupted by an application program.
checksum bad	The computer uses the default settings. Run BIOS Setup Utility to
	reconfigure the settings. If you still see the same error code, have the
	computer serviced.
0260: System timer error	Have the computer serviced.
0270: Real time clock	Have the computer serviced.
error
0271: Date and time	Neither the date nor the time is set in the computer. Set the date and time,
error	using the BIOS Setup Utility.
0280: Previous boot	Your computer was previously unable to complete the boot process.
incomplete	Turn the computer off; then turn it on to start the BIOS Setup Utility. Verify
	the configuration and then restart the computer either by choosing the Exit
	Saving Changes option under the Restart item or by pressing F10. If you
	still see the same error code, have the computer serviced.
02D0: System cache error	The cache is disabled. Have the computer serviced.
02F4: EISA CMOS not	Have the computer serviced.
writable
02F5: DMA test failed	Have the computer serviced.
02F6: Software NMI	Have the computer serviced.
failed
02F7: Fail-safe timer	Have the computer serviced.
NMI failed
1802: Unauthorized	The PCI Express Mini card is not supported on this computer. Remove it.
network card is plugged
in - Power off and
remove the miniPCI
network card.
1803: Unauthorized	The daughter card is not supported on this computer. Remove it.
daughter card is plugged
in - Power off and
remove the daughter
card.

12 ThinkPad® T60 Service and Troubleshooting Guide

	Solving computer problems
Message	Solution
1810: Hard disk partition	A problem in recognizing the layout of the partition on the hard disk has
layout error	halted computer startup. Either the Predesktop Area has been deleted, or the
	hard disk contains corrupt data. To try to restart your computer, complete
	one of the following:
	v If the Predesktop Area has been deleted
	1. Press F1 to open the BIOS Setup Utility.
	2. Select Security -> Predesktop Area -> Access Predesktop Area.
	3. Set this item to Disabled.
	4. Save and exit.
	v If the above fails
	1. Press Enter.
	2. Double-click RECOVER TO FACTORY CONTENTS and follow
	on-screen instructions.
	Note: This will permanently erase the entire contents of the hard disk,
	and then restore software preinstalled by Lenovo.
	Press F1 to open BIOS Setup, or Enter to start the Predesktop Area.
	If the computer still does not start, call the Customer Support Center.
	Telephone numbers are listed in “Worldwide telephone list” on page 64.
2010: Warning: Your	If in the primary drive bay you are using a non-IBM or non-Lenovo hard
internal hard disk drive	disk drive (HDD) or an old generation IBM HDD that is not supported by
(HDD) may not function	this system, with the risk in mind, you can still use it by pressing ESC. If in
correctly on this system.	the primary drive bay you are using a supported IBM or Lenovo HDD with
Ensure that your HDD is	an old firmware, you need to update its firmware to the latest version. The
supported on this system	latest version is available at
and that the latest HDD	http://www.lenovo.com/think/support/
firmware is installed.
2100: Initialization error	The hard disk is not working. Have the hard disk serviced.
on HDD0 (Main hard
disk drive)
2102: Initialization error	The hard disk is not working. Have the hard disk serviced.
on HDD1 (Ultrabay hard
disk drive)
2110: Read error on	The hard disk is not working. Have the hard disk serviced.
HDD0 (Main hard disk
drive)
2112: Read error on	The hard disk is not working. Have the hard disk serviced.
HDD1 (Ultrabay hard
disk drive)

Chapter 3. Solving computer problems 13

Solving computer problems

	Message	Solution
	The power-on password	A power-on password or a supervisor password is set. Type the password
	prompt	and press Enter to use the computer. If the power-on password is not
		accepted, a supervisor password might have been set. Type the supervisor
		password and press Enter. If you still see the same error message, have the
		computer serviced.
	The hard disk password	A hard disk password is set. Type the password and press Enter to use the
	prompt	computer.
		If you still see the same error message, have the computer serviced.
	Hibernation error	The system configuration changed between the time your computer entered
		hibernation mode and the time it left this mode, and your computer cannot
		resume normal operation.
		v Restore the system configuration to what it was before your computer
		entered hibernation mode.
		v If the memory size has been changed, re-create the hibernation file.
	Operating system not	Verify the following:
	found.	v The hard disk drive is correctly installed.
		v A startable diskette is in the diskette drive
		If you still see the same error message, check the boot sequence, using the
		BIOS Setup Utility.
	Fan error	The cooling fan has failed. Have the computer serviced.
	EMM386 Not Installed -	Edit C:\CONFIG.SYS and change a line from
	Unable to Set Page	device=C:\WINDOWS\EMM386.EXE RAM
	Frame Base Address.
		to
		device=C:\WINDOWS\EMM386.EXE NOEMS
		and save this file.
	CardBus Configuration	Go to the BIOS Setup Utility. Press F9 and then Enter to load the default
	Error - Device Disabled	setting.
		Press F10 and then Enter to restart the system.
	Thermal sensing error	The thermal sensor is not functioning correctly. Have the computer serviced.
	Authentification of	The Predesktop Area in the HDD is broken. To use the Predesktop Area, get
	system services failed.	a Recovery CD, then recover the Predesktop Area using it.
	Press <Esc> to resume.

Errors without messages

Problem:

When I turn on the machine, nothing appears on the screen and the machine does not beep while starting up.

14 ThinkPad® T60 Service and Troubleshooting Guide

Solving computer problems

Note: If you are not sure whether you heard any beeps, turn off the computer; then turn it on again, and listen again. If you are using an external monitor, refer to “Computer screen problems” on page 22.

Solution:

→ If a power-on password is set, press any key to display the power-on password prompt, and then type the correct password and press Enter.

If the power-on password prompt does not appear, the brightness level might be set to minimum brightness. Adjust the brightness level by pressing Fn+Home.

If the screen still remains blank, make sure that:

–The battery is installed correctly.

–The ac adapter is connected to the computer and the power cord is plugged into a working electrical outlet.

–The computer power is on. (Turn on the power switch again for confirmation.)

If these items are properly set, and the screen remains blank, have the computer serviced.

Problem:

When I turn on the machine, nothing appears on the screen, but I hear two or more beeps.

Solution:

→ Make sure that the memory card is installed correctly. If it is, but the screen is still blank, and you hear five beeps, have the computer serviced.

If you hear 4 cycles of 4 beeps each, the Security Chip has a problem. Have the computer serviced.

Problem:

When I turn on the machine, only a white pointer appears on a blank screen.

Solution:

→ Reinstall your operating system, and turn on the computer. If you still see only the pointer on the screen, have the computer serviced.

Chapter 3. Solving computer problems 15

Solving computer problems

Problem:

My screen goes blank while the computer is on.

Solution

→ Your screen saver or power management may be enabled. Touch the TrackPoint or the touch pad, or press a key to exit the screen saver, or press the power switch to resume from standby or hibernation mode.

Problem:

The DOS full-screen looks smaller.

Solution:

→ If you use a DOS application that supports only 640×480 resolution (VGA mode), the screen image might look slightly distorted or appear smaller than the display size. This is to maintain compatibility with other DOS applications. To expand the screen image to the same size as the actual screen, start the ThinkPad Configuration Program and click LCD; then enable the Screen expansion function. (The image might still look slightly distorted.)

A password problem

Problem:

I forgot my password.

Solution

→ If you have registered your computer for Password Reset Service, and you forget your power-on or hard disk password, you can reset it by pressing the ThinkVantage button at the password prompt.

–If you cannot reset your power-on password, you must take your computer to a Lenovo authorized servicer or a marketing representative to have the password canceled.

–If you cannot reset your hard disk password, Lenovo authorized servicer cannot reset your password or recover data from the hard disk. You must take your computer to a Lenovo authorized servicer or a marketing representative to have the hard disk drive replaced. Proof of purchase is required, and a fee will be charged for parts and service.

→ If you forget your supervisor password, Lenovo authorized servicer cannot reset your password. You must take your computer to a Lenovo authorized servicer or a marketing representative to have the system board replaced. Proof of purchase is required, and a fee will be charged for parts and service.

16 ThinkPad® T60 Service and Troubleshooting Guide

Solving computer problems

A power switch problem

Problem:

The system does not respond, and you cannot turn off the computer.

Solution:

→ Turn off the computer by pressing and holding the power switch for 4 seconds or more. If the computer is still not reset, remove the ac adapter and the battery.

Keyboard problems

Problem:

All or some of the keys on the keyboard do not work.

Solution:

→ If the problem occurred immediately after the computer returned from standby mode, enter the power-on password if one has been set.

If an external PS/2® keyboard is connected, the numeric keypad on your computer does not work. Use the numeric keypad on the external keyboard.

If an external numeric keypad or a mouse is connected:

1.Turn off the computer.

2.Remove the external numeric keypad or the mouse.

3.Turn on the computer and try using the keyboard again.

If the keyboard problem is resolved, carefully reconnect the external numeric keypad, external keyboard, or mouse, making sure that you have seated the connectors properly.

If keys on the keyboard still do not work, have the computer serviced.

Problem:

A number appears when you type a letter.

Solution

→ The numeric lock function is on. To disable it, press and hold Shift or Fn; then press NmLk (ScrLk).

Problem:

All or some of the keys on the external numeric keypad do not work.

Solution:

→ Make sure that the external numeric keypad is correctly connected to the computer.

Chapter 3. Solving computer problems 17

Solving computer problems

Problem

Some or all of the keys on the external PS/2 keyboard do not work.

Solution

→ If you are using the ThinkPad Advanced Dock, the ThinkPad Advanced Mini Dock, or the ThinkPad Essential Port Replicator, make sure that the keyboard cable is correctly connected to the keyboard connector.

If the connection is correct, disconnect the cable and make sure that the built-in keyboard operates properly. If the built-in keyboard works, there is a problem with the external keyboard. Try using a different external keyboard.

UltraNav problems

Problem:

The pointer drifts when the computer is turned on or after it resumes normal operation.

Solution:

→ The pointer might drift when you are not using the TrackPoint during normal operation. This is a normal characteristic of the TrackPoint and is not a defect. Pointer drifting might occur for several seconds under the following conditions:

–When the computer is turned on.

–When the computer resumes normal operation.

–When the TrackPoint is pressed for a long time.

–When the temperature changes.

Problem:

The mouse or the pointing device does not work.

Solution:

→ Make sure that the TrackPoint and the touch pad are set to Automatic in the ThinkPad Configuration Program. Then detach the mouse or the pointing device, and try using the TrackPoint and the touch pad. If the TrackPoint and the touch pad work, the error might be due to the mouse or the pointing device.

Make sure that the cable for the mouse or the pointing device is securely connected to the ThinkPad Advanced Dock, the ThinkPad Advanced Mini Dock, or the ThinkPad Essential Port Replicator.

If your mouse is incompatible with the PS/2 mouse, disable the

TrackPoint, using the ThinkPad Configuration Program.

Note: For more information, see the manual supplied with the mouse.

18 ThinkPad® T60 Service and Troubleshooting Guide

Solving computer problems

Problem:

The mouse buttons do not work.

Solution:

→ If your ThinkPad computer has the TrackPoint only, this problem may occur.

Change the mouse driver to Standard PS/2 Port Mouse, and then reinstall PS/2 TrackPoint. Drivers are provided in the C:\IBMTOOLS\DRIVERS or C:\SWTOOLS\DRIVERS directory on your hard disk drive. If your hard disk drive does not contain device drivers, refer to the ThinkPad Web site. For access to this Web site, press the ThinkVantage button and open the ThinkVantage Productivity Center.

Problem:

The scrolling or magnifying glass function does not work.

Solution:

→ Check the mouse driver in the Device Manager window, and make sure that the PS/2 TrackPoint driver is installed.

Standby or hibernation problems

Problem:

The computer enters standby mode unexpectedly.

Solution:

→ If the processor overheats, the computer automatically enters standby mode to allow the computer to cool and to protect the processor and other internal components. Also, check the settings for standby mode, using Power Manager.

Problem:

The computer enters standby mode immediately after Power-on self-test (POST) (the standby indicator light turns on).

Solution:

→ Make sure that:

–The battery is charged.

–The operating temperature is within the acceptable range. Refer to “Specifications” on page 74.

If these items are correct, have the computer serviced.

Chapter 3. Solving computer problems 19

Solving computer problems

Problem:

The critical low-battery error message is displayed, and the computer immediately turns off.

Solution:

→ The battery power is getting low. Connect the ac adapter to the computer, or replace the battery with a fully charged one.

Problem:

When you take action to return from standby mode, the computer display remains blank.

Solution:

→ Check whether an external monitor was disconnected while the computer was in standby mode. Do not disconnect the external monitor while the computer is in standby mode or hibernation mode. If no external monitor is attached when the computer resumes, the computer display remains blank and output is not displayed. This restriction does not depend on the resolution value. Press Fn+F7 to bring up the computer display.

Note: If you use the Fn+F7 key combination to apply a presentation scheme, press Fn+F7 at least three times in three seconds, and the image is displayed on the computer screen.

Problem:

The computer does not return from standby mode, or the standby indicator stays on and the computer does not work.

Solution:

→ If the system does not return from standby mode, it may have entered standby or hibernation mode automatically because the battery is depleted. Check the standby indicator.

–If the standby indicator is on, your computer is in standby mode. Connect the ac adapter to the computer; then press Fn.

–If the standby indicator is off, your computer is in hibernation mode or power-off state. Connect the ac adapter to the computer; then press power button to resume operation.

If the system still does not return from standby mode, your system may stop responding and you cannot turn off the computer. In this case, you need to reset the computer. If you have not saved your data, it may be lost. To reset the computer, press and hold the power button for 4 seconds or more. If the system is still not reset, remove the ac adapter and the battery.

20 ThinkPad® T60 Service and Troubleshooting Guide

Solving computer problems

Problem:

Your computer does not enter standby or hibernation mode.

Solution:

→ Check whether any option has been selected that would disable your computer from entering standby or hibernation mode.

Problem:

The system does not wake up at the time set on the timer, if the computer is not connected to an ac power source, -or- The system does not enter hibernation mode from suspend mode, if the computer is not connected to an ac power source.

Solution:

→The timer-wake-with-battery-operation is disabled by default. If you enable this function, the computer could wake up and begin running while it is being carried; this could lead to damage to the hard disk drive.

With this risk in mind, you can enable the timer-wake-with-battery- operation.

1.Turn your computer off and then on again; then, while the message, “To interrupt normal startup, press the blue ThinkVantage button” is displayed at the lower left of the screen, press the ThinkVantage button. The Rescue and Recovery workspace opens.

2.Click Access BIOS. The System Restart Required window is displayed.

3.Click Yes. The computer restarts, and the BIOS Setup Utility menu appears.

4.With the cursor key, select Config; then press Enter. The Power submenu is displayed.

5.Select Timer Wake with Battery Operation by pressing Enter.

6.With the F5 or F6 key, select Enabled; then press Enter.

7.Press F10 and Enter to save this setting and exit this utility.

For information about the BIOS Setup Utility, see “BIOS Setup Utility” in Access Help.

Problem:

The Fn+F12 key combination does not cause the computer to enter hibernation mode.

Chapter 3. Solving computer problems 21

Solving computer problems

Solution:

→ The computer cannot enter hibernation mode:

–If you are using one of the communication PC Cards. To enter hibernation mode, stop the communication program, and then remove the PC Card or disable the PC Card slot. Click the Safely Remove Hardware icon in the taskbar (for Windows XP) or the Unplug or Eject Hardware icon in the taskbar (for Windows 2000).

–If the hibernation mode is not enabled. To enable it, do as follows: 1. Start the ThinkPad Configuration Program.

2. Click Power Management.

3. Click the Hibernate tab.

4. Select the hibernate support checkbox.

5. Click OK.

Note: You can enter hibernation mode by pressing Fn+F12 only if the PM driver for Windows XP or Windows 2000 has been installed.

Computer screen problems

Problem:

The screen is blank.

Solution:

→ Press Fn+F7 to bring up the image.

Note: If you use the Fn+F7 key combination to apply a presentation scheme, press Fn+F7 at least three times in three seconds, and the image is displayed on the computer screen.

→If you are using the ac adapter, or using the battery, and the battery status indicator is on (is green), press Fn+Home to make the screen brighter.

→If the standby status indicator is on (is green), press Fn to resume from the standby mode.

→If the problem persists, do the Solution in the problem below.

Problem:

The screen is unreadable or distorted.

Solution:

→ Make sure that:

–The display device driver is installed correctly.

–The screen resolution and color quality are correctly set.

–The monitor type is correct.

To check these settings, do as follows:

22 ThinkPad® T60 Service and Troubleshooting Guide