Loading...
HP LP1965 19", LP2065 20", and LP2465 24"
LCD Monitors
User Guide
© 2005–2008 Hewlett-Packard
Development Company, L.P.
Microsoft, Windows, and the Windows logo are trademarks of Microsoft Corporation in the U.S. and other countries.
All other product names mentioned herein may be trademarks of their respective companies.
Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. The information in this document is provided “as is” without warranty of any kind, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, and is subject to change without notice. The warranties for Hewlett-Packard products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty.
This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company.
Fourth Edition (May 2008)
Document Part Number: 397376-004
About This Guide
This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications.
WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information.
NOTE: Text set off in this manner provides important supplemental information.
ENWW |
iii |
iv About This Guide |
ENWW |
Table of contents
1 Product Features |
|
HP LP1965, LP2065, and LP2465 Models ........................................................................................... |
1 |
2 Safety and Maintenance Guidelines |
|
Important Safety Information ................................................................................................................ |
3 |
Maintenance Guidelines ....................................................................................................................... |
4 |
Cleaning the Monitor ............................................................................................................ |
4 |
Shipping the Monitor ............................................................................................................ |
4 |
3 Setting Up the Monitor |
|
Installing the Monitor Pedestal Base .................................................................................................... |
5 |
Rear Components ................................................................................................................................ |
6 |
Selecting the Signal Connectors and Cables ....................................................................................... |
7 |
Connecting the Monitor ........................................................................................................................ |
8 |
Adjusting the Monitor ............................................................................................................................ |
9 |
Turning on the Monitor ....................................................................................................................... |
11 |
Connecting USB Devices ................................................................................................................... |
12 |
Using the Accessory Rails .................................................................................................................. |
13 |
Removing the Monitor Pedestal Base ................................................................................................ |
13 |
Mounting the Monitor ......................................................................................................... |
14 |
Locating the Rating Labels ................................................................................................................. |
16 |
4 Operating the Monitor |
|
Software and Utilities .......................................................................................................................... |
17 |
The Information File ........................................................................................................... |
17 |
The Image Color Matching File .......................................................................................... |
17 |
Installing the .INF and .ICM Files ....................................................................................................... |
18 |
Installing from the CD ........................................................................................................ |
18 |
Downloading from the Worldwide Web .............................................................................. |
18 |
Using the Auto-Adjustment Function .................................................................................................. |
19 |
Front Panel Controls .......................................................................................................................... |
20 |
Adjusting the Monitor Settings ............................................................................................................ |
21 |
Using the On-Screen Display Menu .................................................................................. |
21 |
OSD Menu Selections ....................................................................................... |
21 |
ENWW |
v |
Optimizing Digital Conversion ........................................................................... |
25 |
Using the HP Display Assistant Utility ............................................................................... |
25 |
Identifying Monitor Conditions ............................................................................................................ |
26 |
Sleep Timer Mode .............................................................................................................................. |
26 |
HP Display LiteSaver ......................................................................................................................... |
27 |
Installing the HP Display LiteSaver Software .................................................................... |
27 |
sRGB Support .................................................................................................................................... |
28 |
Changing the Color Temperature ...................................................................................... |
28 |
Installing the sRGB ICM File for Microsoft Windows 2000 and Windows XP .................... |
28 |
Appendix A Troubleshooting |
|
Solving Common Problems ................................................................................................................ |
30 |
Using the Worldwide Web .................................................................................................................. |
31 |
Preparing to Call Technical Support ................................................................................................... |
31 |
Appendix B Technical Specifications |
|
LP1965 Model .................................................................................................................................... |
32 |
LP2065 Model .................................................................................................................................... |
33 |
LP2465 Model .................................................................................................................................... |
34 |
Recognizing Preset Display Resolutions ............................................................................................ |
35 |
Entering User Modes .......................................................................................................................... |
37 |
Energy Saver Feature ........................................................................................................................ |
37 |
Appendix C Agency Regulatory Notices |
|
Federal Communications Commission Notice ................................................................................... |
38 |
Modifications ...................................................................................................................... |
38 |
Cables ................................................................................................................................ |
38 |
Declaration of Conformity for Products Marked with the FCC Logo (United States Only) ................. |
38 |
Canadian Notice ................................................................................................................................. |
39 |
Avis Canadien .................................................................................................................................... |
39 |
European Union Regulatory Notice .................................................................................................... |
39 |
German Ergonomics Notice ............................................................................................................... |
40 |
Japanese Notice ................................................................................................................................. |
40 |
Korean Notice ..................................................................................................................................... |
40 |
Power Cord Set Requirements ........................................................................................................... |
40 |
Japanese Power Cord Requirements ................................................................................ |
40 |
Product Environmental Notices .......................................................................................................... |
41 |
Materials Disposal ............................................................................................................. |
41 |
Disposal of Waste Equipment by Users in Private Household in the European |
|
Union ................................................................................................................................. |
41 |
Chemical Substances ........................................................................................................ |
41 |
Restriction of Hazardous Substances (RoHS) ................................................................... |
41 |
vi |
ENWW |
Appendix D LCD Monitor Quality and Pixel Policy
ENWW |
vii |
viii |
ENWW |
1 Product Features
HP LP1965, LP2065, and LP2465 Models
The flat panel monitors have an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include:
●LP1965 model, large 19-inch (48.3 cm) viewable area display with 1280 × 1024 resolution, plus full-screen support for lower resolutions
●LP2065 model, large 20.1-inch (51 cm) viewable area display with 1600 × 1200 resolution, plus full-screen support for lower resolutions
●LP2465 model, large 24-inch (61 cm) viewable area display with 1920 × 1200 resolution, plus fullscreen support for lower resolutions
●Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side
●Pivot capability to rotate display to portrait mode
●Tilt, swivel, and height adjustment capabilities
●Removable stand with quick release mechanism and VESA 100 mm mounting holes for flexible mounting solutions
●Video inputs support DVI analog and digital signal inputs
●Two DVI-I to VGA signal cables and two DVI-D signal cables included (LP2065 and LP2465 models)
●One DVI-I to VGA signal cable and one DVI-D signal cable included (LP1965 model only)
●USB 2.0 hub with one upstream (connects to the computer) and four downstream (connects to USB devices) ports
●USB cable included to connect the monitor's USB hub to the USB connector on the computer
●Accessory rail on monitor to accept optional mounted devices, such as an HP speaker bar
●Plug and play capability if supported by the system.
●On-Screen Display (OSD) adjustments in English, Dutch, French, German, Italian, Japanese, and Spanish for ease of setup and screen optimization
●Software and documentation CD that includes HP Display Assistant, Pivot Pro software, monitor driver software, and product documentation
●Energy saver feature to meet requirements for reduced power consumption
ENWW |
HP LP1965, LP2065, and LP2465 Models 1 |
●AssetControl
●Compliant with the following regulated specifications:
◦European Union CE Directives
◦Swedish MPR II 1990
◦Swedish TCO Requirements
2 Chapter 1 Product Features |
ENWW |
2 Safety and Maintenance Guidelines
Important Safety Information
A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Power Cord Set Requirements on page 40 section in Appendix C.
WARNING! To reduce the risk of electric shock or damage to the equipment:
•Do not disable the power cord grounding feature. The grounding plug is an important safety feature.
•Plug the power cord in a grounded (earth) outlet that is easily accessible at all times.
•Disconnect power from the product by unplugging the power cord from the electrical outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug.
To reduce the risk of serious injury, read the Safety and Comfort Guide. It describes proper workstation, setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and/or on the documentation CD, if one is included with the monitor.
CAUTION: For the protection of the monitor, as well as the computer, connect all power cords for the computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge protection device such as a power strip or Uninterruptible Power Supply (UPS). Not all power strips provide surge protection; the power strips must be specifically labeled as having this ability. Use a power strip whose manufacturer offers a Damage Replacement Policy so you can replace the equipment, if surge protection fails.
ENWW |
Important Safety Information 3 |
Maintenance Guidelines
To enhance the performance and extend the life of the monitor:
●Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider.
●Use only a power source and connection appropriate for this monitor, as indicated on the label/ back plate of the monitor.
●Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the electrical outlet, and the total ampere rating of the products connected to the cord does not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS or A) for each device.
●Install the monitor near an outlet that you can easily reach. Disconnect the monitor by grasping the plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord.
●Turn the monitor off when not in use. You can substantially increase the life expectancy of the monitor by using a screen saver program and turning off the monitor when not in use.
●Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings.
●Do not drop the monitor or place it on an unstable surface.
●Do not allow anything to rest on the power cord. Do not walk on the cord.
●Keep the monitor in a well-ventilated area, away from excessive light, heat or moisture.
●When removing the monitor base, you must lay the monitor face down on a soft area to prevent it from getting scratched, defaced, or broken.
Cleaning the Monitor
1.Turn off the monitor and the computer.
2.Unplug the monitor from the wall outlet.
3.Clean the monitor plastics with a clean cloth dampened with water.
4.Clean the monitor screen with an antistatic screen cleaner.
CAUTION: Do not use benzene, thinner, ammonia, or any other volatile substances to clean the monitor or the screen. These chemicals may damage the cabinet finish as well as the screen.
Shipping the Monitor
Keep the original packing box in a storage area. You may need it later if you move or ship the monitor.
4 |
Chapter 2 Safety and Maintenance Guidelines |
ENWW |
3 Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below.
NOTE: Be sure the master power switch, located on the rear panel of the monitor, is in the off position. The master power switch turns off all power to the monitor.
Installing the Monitor Pedestal Base
NOTE: Do not install the pedestal base if the monitor will be used on a wall, swing arm, or other mounting fixture; instead see the section on Mounting the Monitor on page 14 in this chapter.
1.Using both hands, position the monitor over the pedestal base.
CAUTION: Do not touch the surface of the LCD panel. Pressure on the panel may cause nonuniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its normal condition.
2.Press down firmly on the monitor to lock the pedestal base in place. When the base locks, it will make a clicking sound.
Figure 3-1 Inserting the Monitor into the Pedestal Base
NOTE: Be sure the pedestal base is securely locked before continuing with the setup.
ENWW |
Installing the Monitor Pedestal Base 5 |
Rear Components
Figure 3-2 Rear Components
Component |
|
Function |
|
|
|
1 |
Cable Lock Provision |
Provides slot for use with cable security locks. |
|
|
|
2 |
Master Power Switch |
Turns off all power to the monitor. |
|
|
|
3 |
AC Power Connector |
Connects the AC power cord to the monitor. |
|
|
|
4 |
DVI-I Connectors |
Connects the DVI-I to VGA signal cable or DVI-D signal cable |
|
|
to the monitor. |
|
|
|
5 |
USB Upstream |
Connects the monitor USB hub to a host USB port/hub. |
|
Connector |
|
|
|
|
6 |
USB Downstream |
Connects optional USB devices to the monitor. |
|
Connectors |
|
|
|
|
7 |
USB Downstream |
Connects optional USB devices to the monitor. |
|
Connectors (side panel) |
|
|
|
|
6 Chapter 3 Setting Up the Monitor |
ENWW |
Selecting the Signal Connectors and Cables
The monitor features two DVI-I connectors capable of supporting either analog or digital input. The video mode supported by the DVI-I connector is determined by the video cable used.
●For digital operation, use the DVI-D signal cable provided. Connect the DVI-D signal cable to a DVI-I connector on the monitor and the other end to the DVI connector on the computer.
●For analog operation, use the DVI-I to VGA signal cable provided. Connect the DVI-I to VGA signal cable to a DVI-I connector on the monitor and the other end to the VGA connector on the computer.
The monitor will automatically determine which inputs have valid video signals. The inputs can be selected through the On-Screen Display (OSD) feature by pressing the Input Select button on the front panel.
Figure 3-3 Connecting the DVI-I to VGA Signal Cable
Figure 3-4 Connecting the DVI-D Signal Cable
ENWW |
Selecting the Signal Connectors and Cables |
7 |
Connecting the Monitor
1.Place the monitor in a convenient, well-ventilated location near the computer.
2.Connect one end of the USB hub cable to the USB connector on the rear panel of the computer, and the other end to the upstream USB connector on the monitor.
Figure 3-5 Connecting the USB Cable
WARNING! To reduce the risk of electric shock or damage to the equipment:
•Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
•Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
•Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug.
3.Connect one end of the power cable to the AC power connector on the back of the monitor, and the other end to an electrical wall outlet.
Figure 3-6 Connecting the Power Cable
8 Chapter 3 Setting Up the Monitor |
ENWW |
Loading...