HP LASERJET 2600, Color LaserJet 2600 Instructions Manual

HP Color LaserJet 2600 series -- Maintenance Kit Instructions

www.printertechs.com

Please note that installing the fuser in this maintenance kit is considered an
advanced installation procedure. If you have never done this before you will
want to follow the steps carefully and allow extra time for installation.

Because of the advanced nature of the fuser installation, we can only provide
limited technical support for this kit.

Here is the outline of installation steps:

Step #1 – Replace the separation pad.
Step #2 – Replace the pickup roller.
Step #3 – Replace the fuser.

Paper pickup roller removal and replacement

Use the following procedures to remove the paper pickup roller.

1 Open the front door.

2 Remove the print cartridges.

ENWW Removal and replacement procedures 89

3 Remove two (2) screws.

1 Two (2) screws

4 Remove the pre-transfer guide (RC1–5419–000CN).

5 Use a small screwdriver to pull back on the tabs.

90 Chapter 5 Removal and replacement ENWW