GV-N250ZL-1GI/
GV-N250OC-1GI/ GV-N250ZL-1GI rev2.0/ GV-N250OC-1GI rev2.0
NVIDIA® GeForceTM GTS 250 Graphics Accelerator
User's Manual
Rev. 202
12MM-N250ZGI-202R
Copyright
© 2010 GIGABYTE TECHNOLOGY CO., LTD
Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in any form without the expressed, written permission of GBT.
Trademarks
Third-party brands and names are the properties of their respective owners.
Notice
Please do not remove any labels on this graphics card. Doing so may void the warranty of this card.
Due to rapid change in technology, some of the specifications might be out of date before publication of this this manual. The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein.
Macrovision corporation product notice:
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
VGA Card
GV-N250ZL-1GI
VGA Card
GV-N250ZL-1GI
Feb.16,2009
Feb.16,2009
VGA Card
GV-N250OC-1GI
VGA Card
GV-N250OC-1GI
Mar.06,2009
Mar.06,2009
VGA Card
GV-N250ZL-1GI rev2.0
VGA Card
GV-N250ZL-1GI rev2.0
July.07,2009
July.07,2009
VGA Card
GV-N250OC-1GI rev2.0
VGA Card
GV-N250OC-1GI rev2.0
June.08,2009
June.08,2009
Table of Contents |
|
1. Introduction ................................................................................................................ |
7 |
1.1. Features ......................................................................................................................... |
7 |
1.2. Minimum System Requirements .................................................................................... |
7 |
2. Hardware Installation .................................................................................................. |
8 |
2.1. Board Layout ................................................................................................................. |
8 |
2.2. Hardware Installation .................................................................................................... |
10 |
3. Software Installation .................................................................................................. |
12 |
3.1. Driver and Utility Installation ......................................................................................... |
12 |
3.1.1. Driver Installation ......................................................................................................... |
12 |
3.1.2. GIGABYTE Gamer HUD Lite on Driver Disk ........................................................... |
14 |
3.2. Display Properties Pages ........................................................................................ |
16 |
3.3. Accessing NVIDIA Control Panel ............................................................................ |
17 |
4. Troubleshooting Tips ................................................................................................ |
25 |
5. Appendix ................................................................................................................. |
26 |
5.1. How to Reflash the BIOS in MS-DOS Mode .............................................................. |
26 |
5.2. Resolutions and Color Depth Tables ............................................................................. |
27 |
5.3. Regulatory Statements ................................................................................................. |
29 |
- 6 -
1. Introduction
1.1.Features
•Powered by NVIDIA® GeForceTM GTS 250 Graphics Processing Unit (GPU)
•Supports PCI Express 2.0
•Integrated with 1 GB GDDR3 memory (For GV-N250ZL-1GI/GV-N250OC-1GI/ GV-N250ZL-1GI rev2.0/GV-N250OC-1GI rev2.0only)
•Supports DirectX 10
•Supports NVIDIA® SLITM (Scalable Link Interface) technology (Note)
•Supports 1 HDMI connector
•Supports 1 D-Sub connector
•Supports 1 DVI-I connectors
•Supports HDCP (High-Bandwidth Digital Content Protection) technology
1.2.Minimum System Requirements
•Hardware
-Intel® Pentium®/CoreTM 2 or AMD AthlonTM/PhenomTM
-128 MB of system memory; 2 GB or more for best performance
-Optical drive for software installation (CD-ROM or DVD-ROM drive)
-A rating power 500 Watt power supply or above is a must
•Operating System
-Windows® 7
-Windows® Vista
-Windows® XP with Service Pack 2 (SP2)
-Windows® XP Professional x64 Edition
•SLI TM Configuration
If you are planning on using this graphics card as part of an SLI system, the following are required:
-An SLI certified motherboard with two PCI Express x16 slots and correct chipset driver
-Two GV-N250ZL-1GI/GV-N250OC-1GI/GV-N250ZL-1GI rev2.0/GV-N250OC-1GI rev2.0
-A rating power 500 Watt power supply or above is a must
-An SLI bridge connector
(Note) |
SLI technology requires a PCI Express motherboard with two x16 physical connectors. Graphics cards working in an |
|
SLI configuration must be with the same model name (e.g. GV-N250ZL-1GI/GV-N250OC-1GI/ GV-N250ZL-1GI rev2.0/ |
|
GV-N250OC-1GI rev2.0) and from the same vendor (e.g. GIGABYTE TECHNOLOGY). |
- 7 - |
Introduction |
2. Hardware Installation
2.1. Board Layout
SLI Connector
HDMI Connector D-Sub monitor Connector
(15-pin)
DVI-I Connector
Digital LCD Monitor
HDMI to DVI-I Adapter (Optional)
HDMI TV
or
Analog LCD Monitor Analog Monitor
DVI Output
Digital LCD Monitor
HDMI Connector
D-Sub monitor Connector (15-pin)
DVI-I
Connector
GV-N250 Series Graphics Accelerator |
- 8 - |
Expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer.
1.Turn off your computer and unplug power supply.
2.Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case.
3.Place components on a grounded antistatic pad or on the bag that came with the components whenever the components are separated from the system.
The card contains sensitive electric components, which can be easily damaged by static electricity, so the card should be left in its original packing until it is installed.
Unpacking and installation should be done on a grounded anti-static mat. The operator should be wearing an anti-static wristband, grounded at the same point as the anti-static mat.
Inspect the card carton for obvious damage. Shipping and handling may cause damage to your card. Be sure there are no shipping and handling damages on the card before proceeding.
DO NOT APPLY POWER TO YOUR SYSTEM IF THE GRAPHICS CARD IS DAMAGED.
In order to ensure that your graphics card can work correctly, please use official GIGABYTE BIOS only. Using non-official GIGABYTE BIOS might cause problem(s) on the graphics card.
- 9 - |
Hardware Installation |