GE GDT655SSJ2SS, GDT655SGJ2BB, GDT635HSJ6SS, GDT635HSJ5SS, GDT635HSJ4SS Owner’s Manual

DISHWASHERS

SAFETY INFORMATION . . . . . . . . .4

USING THE DISHWASHER

Getting Started. . . . . . . . . . . . . . . . . . . . . . . .6

Dispensers . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

CARE AND CLEANING . . . . . . . . . . . . 15

TROUBLESHOOTING TIPS. . . . . . 17

WARRANTY. . . . . . . . . . . . . . . . . . . . . . 21

CONSUMER SUPPORT . . . . . . . . . .22

FRONT CONTROL MODELS

Write the model and serial numbers here:

Model #_________________

Serial # _________________

You can find them on a label on the tub wall just inside the door.

OWNER’S MANUAL

GDF500-620 Series

GDT535-635 Series

ENGLISH/FRANÇAIS/

ESPAÑOL

TOP CONTROL MODELS

GE is a trademark of the General Electric Company. Manufactured under trademark license.

49-55117 05-17 GEA

THANK YOU FOR MAKING GE APPLIANCES A PART OF YOUR HOME.

Whether you grew up with GE Appliances, or this is your first, we’re happy to have you in the family.

We take pride in the craftsmanship, innovation and design that goes into every GE Appliances product, and we think you will too. Among other things, registration of your appliance ensures that we can deliver important product information and warranty details when you need them.

Register your GE appliance now online. Helpful websites and phone numbers are available in the Consumer Support section of this Owner’s Manual. You may also mail in the pre-printed registration card included in the packing material.

2
	49-55117

Notes

WELCOME

49-55117

3

SAFETY INFORMATION

IMPORTANT SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

WARNING For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, electric shock, and to prevent property damage, personal injury, or death.

WARNING PROPER INSTALLATION AND MAINTENANCE

This dishwasher must be properly installed and located in accordance with the Installation Instructions before it is used. If you did not receive an Installation Instructions sheet with your dishwasher, you can receive one by visiting our Website at GEAppliances.com. In Canada, visit www.GEAppliances.ca.

ŶConnect the dishwasher/appliance to a grounded metal, permanent wiring system; or run an equipment-grounding conductor with the circuit conductors and connect to the equipment-grounding terminal or lead of the appliance.

ŶImproper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded.

ŶDispose of discarded appliances and shipping or packing material properly.

ŶDo not attempt to repair or replace any part of your dishwasher unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

ŶUse only cord kit WX09X70910 or hard-wire to building electrical. Failure to follow this instruction, could result in risk of fire and personal injury.

ŶTo minimize the possibility of electric shock, disconnect this appliance from the power supply before attempting any maintenance.

NOTE: Turning the dishwasher off does not disconnect the appliance from the power supply. We recommend having a qualified technician service your appliance.

WARNING WHEN USING YOUR DISHWASHER, FOLLOW BASIC PRECAUTIONS, INCLUDING THE FOLLOWING:

ŶUse this appliance only for its intended purpose as described in this Owner’s Manual.

ŶUse only detergents or wetting agents recommended for use in a dishwasher and keep them out of reach of children. Using a detergent that is not specifically designed for dishwashers will cause the dishwasher to fill with suds.

ŶLocate sharp items so that they are not likely to damage the door seal.

ŶLoad sharp knives with the handles up to reduce the risk of cut-type injuries.

ŶDo not wash plastic items unless marked dishwasher safe or the equivalent. For plastic items not so marked, check the manufacturer’s recommendations.

ŶDo not touch the heating element during or immediately after use.

ŶDo not operate your dishwasher unless all enclosure panels are properly in place.

ŶDo not tamper with controls.

ŶDo not abuse, sit on or stand on the door or dish rack of the dishwasher.

ŶTo reduce the risk of injury, do not allow children to play with, on or inside this appliance at any time.

ŶDo not store or use combustible materials including gasoline or other flammable liquids or vapors in the vicinity of this or any other appliance.

ŶSmall parts, such as rack clips and filter retaining posts, can be a choke hazard to small children if removed from the dishwasher. Keep out of reach of small children.

READ AND SAVE THESE INSTRUCTIONS

4

49-55117

IMPORTANT SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

WARNING WATER HEATER SAFETY

Under certain conditions, hydrogen gas may be produced in a water heater that has not been used for two or more weeks.

HYDROGEN GAS IS EXPLOSIVE.

If the hot water has not been used for two or more weeks, prevent the possibility of damage or injury by turning on all hot water faucets and allowing them to run for several minutes. Do this before using any electrical appliance connected to the hot water system. This simple procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not smoke, use an open flame, or use the appliance during this process.

WARNING RISK OF CHILD ENTRAPMENT

PROPER DISPOSAL OF THE DISHWASHER

Junked or abandoned dishwashers are dangerous…even if they will sit for “just a few days.” If you are getting rid of your dishwasher, please follow the instructions below to help prevent accidents.

Ŷ Do not allow children to play with, on, or inside this or any discarded appliance.

	Ŷ Take off the door of the washing compartment or remove the latch by removing the two	Two screws
	screws from the latch receiver inside the tub (as shown).

CAUTION TO PREVENT MINOR INJURY AND PROPERTY DAMAGE

	Ŷ During or after wash cycle, contents may be hot to	Ŷ Non-Dishware Items: Do not wash items such as
	the touch. Use care before handling.	electronic air cleaner filters, furnace filters and
	Ŷ Close supervision is necessary if this appliance is	paint brushes in your dishwasher. Damage to the
		dishwasher and discoloration or staining of the
	used by or near children. Do not allow children to
		dishwasher may result.
	play around the dishwasher when closing the door,
		Ŷ Load light-weight, plastic items so they do not
	closing the upper rack, or while vertically adjusting
	the upper rack due to the possibility of small fingers	become dislodged and drop to the bottom of the
	being pinched.	dishwasher—they might come into contact with the
		heating element and be damaged.

CAUTION ELECTRICAL REQUIREMENTS

Ŷ This appliance must be supplied with 120V, 60 Hz,	Ŷ If the electric supply provided does not meet the
and connected to an individual, properly grounded	above specifications, it is recommended that a
branch circuit, protected by a 15 or 20 amp circuit	licensed electrician install an approved outlet.
breaker or time-delay fuse.	Ŷ Your dishwasher circuit should not be used for any
	other appliance while the dishwasher is in operation as
	the dishwasher requires the full capacity of the circuit.

NOTICE

Ŷ ,I \RXU GLVKZDVKHU LV FRQQHFWHG WR D ZDOO VZLWFK ensure that the switch is on prior to use.

Ŷ ,I \RX FKRRVH WR WXUQ WKH ZDOO VZLWFK RII EHWZHHQ wash cycles, allow 5-10 seconds after turning the switch on before touching Start to allow the control to initialize.

Ŷ 8VH RQO\ SRZGHU Finish® Quantum® Automatic Dishwashing Detergent, liquid detergents or rinse agents recommended for use in a dishwasher and keep them out of the reach of children. Finish® Quantum® Automatic Dishwashing Detergent, and Finish® Jet-Dry® Rinse Aid rinse agents have been approved for use in all GE Appliances dishwashers.

READ AND SAVE THESE INSTRUCTIONS

INFORMATION SAFETY

49-55117

5

USING THE DISHWASHER

Getting started

Features and appearance will vary throughout this manual

1 Load Dishwasher

For best dishwashing results, follow the loading guidelines found in the Loading section. No pre-rinsing of normal food soil is required. Scrape off hard soils, including bones, toothpicks, skins, and seeds. Remove leafy vegetables, meat trimmings, and excessive amounts of grease or oil.

2 Add Detergent

Add needed amount of detergent to the detergent dispenser. Use detergent such as Finish® Quantum® Automatic Dishwashing Detergent. See Dispensers section.

3 Add Rinse Agent

Add rinse agent such as Finish® Jet-Dry® Rinse Aid to the rinse agent dispenser. See Dispensers section.

4 Select Cycle

Press the Select Cycle pad for the desired wash cycle. The light next to the Select Cycle pad will be lit to indicate which wash cycle has been selected.

NOTE: Cycle times vary based on soil level, water temperature, and options selected.

The cycle may be selected with the door in the open position. The cycle will not start until the Start pad is pushed and the door is closed within 4 seconds.

AutoSense	This cycle automatically senses the soil level and adjusts the wash cycle accordingly.
(on some
models)
Heavy	This cycle is meant for heavily soiled dishes, cookware, pots, or pans with dried-on or baked-on
	soils. Everyday dishes are safe to be used in this cycle.
Normal	This cycle is meant for daily, regular, or typical use to completely wash a full load of normally
	soiled dishes and is designed to conserve both water and energy. NOTE: Normal was used to
	rate the energy efficiency of this dishwasher.
Light	This cycle is for light to medium soiled dishes. It is safe for china and crystal with no options
	selected.
Rinse	For rinsing partial loads that will be washed later. Do not use detergent. Detergent is not
(on some	dispensed during the rinse cycle.
models)

6

49-55117

Getting started

5 Select Options

The light by the selected pad will be lit to indicate which Option has been selected.

Wash	This option increases the temperature to help clean heavily soiled dishes and will increase the
Temp	cycle time by 20 to 50 minutes. Option may be turned On or Off during the wash cycle. This
Boost	option will also improve dry performance on the Normal cycle.
(on some
models)
Wash	This option raises the water temperature in the final rinse to sanitize your dishware but may
Temp Sani	increase cycle time by 60 minutes. The cycle length will vary depending on the temperature of
(on some	your inlet water.
models)	NOTE: This option is monitored for sanitization requirements. If the cycle is interrupted during
	or after the main wash portion or if the incoming water temperature is so low that adequate
	water heating cannot be achieved, the sanitizing conditions may not be met. In these cases, the
	Sanitized light will not illuminate at the end of the cycle. Utilizing this option will modify the cycle
	to meet the requirements of Section 6, NSF 184 for soil removal and sanitization efficacy.
	NOTE: NSF certified residential dishwashers are not intended for licensed food establishments.
Heated	Shuts off the drying option. Dishes air dry naturally and energy is saved. Open the dishwasher
Dry Off	door to speed drying.
Heated	Turns on the option for faster drying. This option may add up to 85 minutes to the cycle time.
Dry On	This option is not available with the Rinse cycle.
Steam	For use with heavily soiled and/or dried-on, baked-on soils. This option MUST be selected
(Prewash)	PRIOR to starting the cycle. The Steam option adds up to 30 minutes to the cycle time. This
(on some	option is available with Heavy, AutoSense, and Normal cycles.
models)
Wash	Selecting either the Upper or Lower Wash Zones will target dishwashing of just one rack. This
Zones	will shorten the cycle time and conserve energy. This option should be used when dishes are
(on some	placed in only one rack.
models)
Bottle Jets	This option increases the time that the bottle jets are on and may add up to 23 minutes to the
(on some	cycle time. Use this to wash difficult to clean, dishwasher safe baby bottles, sport bottles, tall
models)	coffee cups, etc. See use recommendations in the Loading section.
Delay	Delays the start of a wash cycle up to 8 to 12 hours depending on model. Press Delay Hours, to
Hours	select the number of hours, then press Start one time and close door to begin countdown. The
(on some	cycle will start once allotted time has expired.
models)
Control	You can lock the controls to prevent selections from being made. You can also lock the
Lock	controls after you have started a cycle to prevent cycle changes. For example, children cannot
	accidentally start the dishwasher by pressing pads with this option selected.
	To LOCK the dishwasher control, depending on the model, press and hold the Heated Dry
	pad for 3 seconds or press and hold the Steam and Wash Temp pads at the same time for 3
	seconds. The Control Lock light will turn on to indicate the control is locked.
	To UNLOCK the dishwasher control, depending on the model, press and hold the Heated Dry
	pad for 3 second or press and hold the Steam and Wash Temp pads at the same time for 3
	seconds. The Control Lock light will turn off to indicate the control is unlocked.

DISHWASHER THE USING

49-55117

7

USING THE DISHWASHER

Getting started

6 Start Dishwasher

Start Door can be open to select the desired options. Press the Start pad and close the door within 10 seconds to start the cycle or begin the Delay Hours countdown. The wash cycle will begin shortly after closing the door. If the door is open, the illuminated lights will turn off if a pad is not pressed within two minutes. To activate the display, close and open the door or press any pad.

Interrupt or To interrupt or pause a dish cycle, slowly open the door. Opening the door will cause the wash Pause cycle to pause. The dishwasher will beep every minute to remind you to close the door. To restart

or resume the cycle, press Start, and close the door within 4 seconds.

Cancel To cancel a wash cycle, press and hold the Start pad for 3 seconds and close door. The dishwasher will drain, emit a beep sound, and the wash cycle light will turn OFF.

7 Cycle Indicator Lights and Sounds

Sanitized Displayed at end of the cycle when Wash Temp Sani (Sanitize) has been selected and dishwasher has met requirements for sanitization. See Wash Temp Sani (Sanitize), for complete description. Opening the door or pressing any key while the door is closed will turn off the light.

Clean Displayed when a wash cycle is complete. The light stays ON as a reminder that the dishes are clean. Opening the door or pressing any key while the door is closed will turn the light off.

Sabbath/ To turn this option ON/OFF, press and hold the Start and Wash Temp pads for 5 seconds, Door close the door and wait 3 minutes for the dishwasher to go into sleep mode. In the OFF mode, Wake Up the control display, control sounds, and interior lights (on some models) will not respond to the Mode door opening/closing. This mode can be used when observing certain religious holidays such as (on some the Sabbath. To activate the control and interior lights (on some models), press any button. models)

8

49-55117

Dispensers

Check the Water Temperature

The entering water should be at least 120°F (49°C) and	Turn on the hot water faucet nearest the dishwasher,
not more than 150°F (66°C) for effective cleaning and to	place the thermometer in a glass and let the water run
prevent dish damage. Check the water temperature with a	continuously into the glass until the temperature stops
candy or meat thermometer.	rising.

Use a Rinse Agent

Rinse agents, such as Finish® Jet-Dry® Rinse Aid are designed for great drying action and to protect against spots and film build-up on your dishes, glasses, flatware, cookware, and plastic.

Filling the Rinse Agent Dispenser

The rinse agent dispenser holds 3.5 oz. (104 ml) of rinse agent. Under normal conditions, this will last approximately one month.

1	Make sure the dishwasher door is fully open.
2	Open the rinse agent dispenser door.
3	Slowly add rinse agent until the cup is full. You may need to pause several times to
	allow rinse aid to settle. NOTE: Indicator window does not light up.	Indicator
4	Clean up any spilled rinse agent with a damp cloth to prevent foam from forming	window
	inside the dishwasher.

5 Close the rinse agent dispenser door.

Rinse Aid Setting

The amount of rinse agent released into the final wash can be adjusted. If water drops or
hard water spots remain on dishes after the dry cycle, increase the setting.		Rinse
To adjust the setting		agent
		adjuster
Open the Rinse Agent dispenser door;
then turn the adjuster clockwise to
increase the amount of rinse agent,
counterclockwise to reduce the amount
of rinse agent.
Clockwise to re-	Counterclockwise
duce water drops	to reduce foaming
and hard water
spots

DISHWASHER THE USING

49-55117

9

USING THE DISHWASHER

Dispensers

Detergent Dispenser

The detergent dispenser is located in the center of the dishwasher door. It has two compartments. The main wash compartment is found inside the detergent

dispenser. To open, press the button on the side of the dispenser. The pre-wash compartment is on the lid of the detergent dispenser. Use the pre-wash compartment only when your water is extremely hard or when you have a heavy soiled load. The pre-wash compartment is not used when tablet or packet detergents are used.

NOTE: Do not block detergent dispenser with large or tall utensils.

Detergent

Dispenser

You may use tablet, packet, powder, liquid or gel automatic dishwasher detergent. Make sure you use only detergents specifically labeled for use in automatic dishwashers. Never use liquid hand dish detergent in an automatic dishwasher. Sudsing and poor wash performance will result with the use of improper detergents.

Detergents should be stored in a dry location and in their original container to prevent loss of effectiveness. Place detergent in the cup just prior to starting the dishwasher and then close the cover. The cover will open during the wash cycle.

Filling the Detergent Dispenser

GE Appliances recommends using detergent in tablet or packet form. Independent testing has shown this form of detergent is very effective in the dishwasher. Finish® Quantum® Powerball® is an example of this type of detergent. Simply put a tablet or packet into the main wash compartment and close the detergent cup cover. Please notice that the tablet or packet must be placed in the main wash compartment of the detergent cup. If the

tablet or packet is placed in the prewash compartment or tossed in the bottom of the dishwasher, the detergent will be flushed down the drain in a very short period of time and will thus be wasted. Wash performance will be very poor as a result.

If you choose to use detergent in powder, liquid or gel form, the amount of detergent you use will be determined by the hardness of your water, the temperature of your water, and the food soil load inside the dishwasher. Contact your water company to get information about the hardness of the water in your area. Water hardness is measured in grains per gallon. Use this information and the table above to determine the amount of detergent

to use. You may purchase a hard water test strip from GE Appliances. Call 1-877-959-8688 and ask for part number WD01X10295. In Canada, call 1-800-661-1616.

Main

Wash

Pre-Wash

Rinse Agent

Push/Slide

to Close

Use the table as a starting point and then adjust the amount of detergent you use. Use just enough to get good wash performance. Using just the right amount of detergent will provide great wash performance without wasting detergent or etching glassware.

	Number of	Detergent Cup(s) to Fill
	Grains/Gal.
	Less than 4	Fill cup to 1/3 full
	4 to 8	Fill cup to 2/3 full
	8 to 12	Fill cup completely full
	Greater than 12	Fill both main wash cup and pre
		wash cup

Using too much detergent with very soft and/or very hot water may cause a condition called etching on your glassware. Etching is a permanent cloudiness in your

glassware. This condition is irreversible. However, using too little detergent will cause poor wash performance.

DO NOT USE HAND DISH DETERGENT

NOTE: Using a detergent that is not specifically designed for dishwashers will cause the dishwasher to fill with suds. During operation, these suds will spill out of the dishwasher vents, covering the kitchen floor and making the floor wet.

Because so many detergent containers look alike, store the dishwasher detergent in a separate space from all other cleaners. Show anyone who may use the dishwasher the correct detergent and where it is stored.

While there will be no lasting damage to the dishwasher, your dishes will not get clean using a dishwashing detergent that is not formulated for automatic dishwashers.

10

49-55117

Loading

For best dishwashing results, follow these loading guidelines. Features and appearance of racks and silverware baskets may vary from your model.

Upper Rack

The upper rack is primarily for glasses, cups, and saucers. For best wash performance, tilt cup and glass openings toward the center of the rack. Other items such as pots, pans, and plates may be placed in the upper rack. This is also a secure place for dishwasher-safe plastic items. The upper rack can be used for odd sized utensils. Sauce pans, mixing bowls, and other similarly shaped items should be placed face down for best wash performance. Ensure small plastic items are secure so that they cannot fall on the heater at the bottom of the dishwasher, potentially damaging the item.

IMPORTANT: Ensure that items do not protrude through the bottom of the rack or silverware basket where they will block the rotation of the middle spray arm. This could result in noise during operation and/or poor wash performance.

DISHWASHER THE USING

	A loaded upper rack may be
CAUTION
	heavier than anticipated. To prevent

minor injury or damage to the contents, do not raise or lower the upper rack after the rack is loaded.

On some models, the upper rack may be adjusted to accommodate larger items. To adjust the upper rack, fully extend the upper rack and remove the two plastic end caps on the front of the rails. Remove the upper rack. Select the set of rollers on the side of the rack that provides the desired height, and reinstall the upper rack by guiding the rack rails between the appropriate set of rollers. With the rack reinstalled, replace the two plastic end caps, ensuring the snap is properly engaged. Failure to properly engage the end caps may result in the rack falling from the dishwasher.

Rail

End

Cap

Rollers

To add flexibility in loading, the stem safe shelf (on some models) may be placed in the up or down position or unfolded and placed in the lower unfolded position.

The shelf may also be used to secure stemware such as wine glasses. Because these stemware items come in various sizes, slowly push the rack in to ensure the items do not bump into the edges of the dishwasher, which may cause damage to the items.

Place the slots in the utility shelf clips over the vertical rack wires and push down to attach utility shelf onto second wire of rack

49-55117

11

USING THE DISHWASHER

Loading

The Bottle Jets system (on some models) is the ideal location to position baby bottles, tall sports bottles, or other tall items with narrow openings. The Bottle Jets clips hold bottles with small openings in place so water jets are directed inside the bottles to clean hard to reach areas. Clips can be installed or removed by simply slipping the clip opening over the top of the nozzle.

Clip

Sports bottle held in place	Baby bottle held in place
over a Bottle Jets clip	under a Bottle Jets clip

Nozzle

Bottle Jets

For best dishwashing results, follow these loading guidelines. Features and appearance of racks and silverware baskets may vary from your model.

Upper Rack - 8 Place Settings	Upper Rack - 10 Place Settings	Upper Rack - 12 Place Settings
GDF510-610, GDT535-545 & GDT625	GDF510-610, GDT535-545 & GDT625	GDF510-610, GDT535-545 & GDT625

Upper Rack - 8 Place Settings	Upper Rack - 10 Place Settings	Upper Rack - 12 Place Settings
GDF620 & GDT635	GDF620 & GDT635	GDF620 & GDT635

12

49-55117

Loading

For best dishwashing results, follow these loading guidelines. Features and appearance of racks and silverware baskets may vary from your model.

Lower Rack

The lower rack is best used for plates, saucers and cookware items. Large items, such as broiler pans and baking racks should be placed along the sides of the rack. If necessary, oversized glasses and mugs can be placed in the lower rack to maximize loading flexibility. Plates, saucers and similar items should be placed between the tines in the direction that allows the item to remain secure in the rack.

IMPORTANT: It is important to ensure that items do not protrude through the bottom of the rack or the silverware basket where they will block the rotation of the lower spray arm. This could result in noise during operation and/or poor wash performance.

Lower Rack - 8 Place Settings	Lower Rack - 10 Place Settings	Lower Rack - 12 Place Settings
GDF510 & GDT535	GDF510 & GDT535	GDF510 & GDT535

DISHWASHER THE USING

Lower Rack - 8 Place Settings	Lower Rack - 10 Place Settings	Lower Rack - 12 Place Settings
GDF520, GDF610, GDT545	GDF520, GDF610, GDT545	GDF520, GDF610, GDT545
& GDT625	& GDT625	& GDT625

Lower Rack - 8 Place Settings	Lower Rack - 10 Place Settings	Lower Rack - 12 Place Settings
GDF620 & GDT635	GDF620 & GDT635	GDF620 & GDT635

49-55117

13

USING THE DISHWASHER

Loading

For best dishwashing results, follow these loading guidelines. Features and appearance of racks and silverware baskets may vary from your model.

Silverware Basket

Place flatware in the removable silverware and accessory baskets (on some models). Sharp objects, such as forks and knives, may be placed with the handles facing up, in order to protect your hands. For the best wash performance, place other items such as spoons with the handles facing down. Avoid allowing items to nest together, which may keep them from being properly washed. When loading, distribute items evenly in the basket.

The silverware and accessory baskets (on some models) may also be used for small items, such as measuring spoons, baby bottle nipples, plastic lids, or corn cob holders. The silverware basket covers (on some models) can be closed to contain small items.

The door mounted silverware basket (on some models) may be positioned either on the door by securing the basket to the door using the two mounting bosses, or to the rack by securing the basket to the rack using the wire loop on the front of the lower rack to engage the tabs on the rear of the basket.

The accessory basket (on some models) may be positioned by placing the hooks on the back of the basket over the top wire on the sides of the lower rack.

Secure the basket to the rack
using the wire loop on the front
of the upper and lower racks to
engage the tabs on the rear of the basket.
IMPORTANT: Do not load large or
tall utensils where they may block the
detergent dispenser, mid spray arm, or
become trapped between the door and
the gasket when the door is closed.
Silverware	Silverware	Wire Loops
Basket	Basket
Mounting
Bosses

	Silverware Basket - 8 Place Settings	Silverware Basket - 10 Place Settings			Silverware Basket - 12 Place Settings
	GDF510 & GDT535		GDF510 & GDT535		GDF510 & GDT535

Silverware Basket - 8 Place Settings	Silverware Basket - 10 Place Settings	Silverware Basket - 12 Place Settings
GDF520, GDF610, GDT545 & GDT625	GDF520, GDF610, GDT545 & GDT625	GDF520, GDF610, GDT545 & GDT625

Silverware Basket - 8 Place Settings		Silverware Basket - 10 Place Settings	Silverware Basket - 12 Place Settings
GDF620 & GDT635		GDF620 & GDT635	GDF620 & GDT635

14

49-55117

Care and cleaning

Control Panel

To clean the control panel, use a lightly dampened cloth. Then dry thoroughly.

Exterior Door Panel

Before cleaning the front panel, make sure you know what type of panel you have. Refer to the last two letters of your model number. You can locate your model number on the left-hand tub wall just inside the door.

If your model number ends with BB, CC, WW, SA or ES then you have a painted door panel. If your model number ends with SS, then you have a Stainless Steel door panel. If your model number ends with II, then you have an Integrated door panel.

Follow the instructions below for cleaning the door panel for your specific model.

Painted Door Panel (model numbers ending in BB– black, CC–bisque, WW–white, SA-silver or ES-slate)

Use a clean, soft, lightly dampened cloth, then dry thoroughly.

Do not use scouring pads or powered cleaners because these products can scratch the finish.

Stainless Steel Door Panel (model numbers ending in SS)

For cleaning rust and tarnish, cleaners with oxalic acid such as Bar Keepers Friend Soft Cleanser™ will remove rust, tarnish and small blemishes. Use only a liquid cleanser free of grit and rub in the direction of the brush lines with a damp soft sponge. Do not use appliance wax or polish on the stainless steel.

For other blemishes and marks, use Stainless Steel Magic or a similar product using a clean soft cloth. Do not use appliance wax, polish, bleach or products containing chlorine on Stainless Steel. You can

order Stainless Steel Magic # WX10X29 through GE Appliances Parts by calling 877.959.8688. In Canada, call 1-800-661-1616.

Integrated Door Panel (model numbers ending in II)

This is a custom installed door panel, and you will need to refer to the cabinet manufacturers recommendations for proper cleaning.

Dishwasher Interior

To clean and de-odorize your dishwasher, use citric acid or Finish® Dishwasher Cleaner, a detergent additive. Finish® Dishwasher Cleaner will break up mineral deposits, and remove hard water film and stains. You can order citric acid GE Appliances kit #WD35X151 through GE Appliances Parts by calling 877-959-8688 or visiting GEApplianceparts.com. In Canada, call 1-800-661-1616. You can purchase Finish® Dishwasher Cleaner at your local grocery store.

Stainless Steel Inner Door and Tub

The stainless steel used to make the dishwasher tub and inner door provides the highest reliability available in a GE Appliances dishwasher.

If the dishwasher tub or inner door should be scratched or dented during normal use, they will not rust or corrode. These surface blemishes will not affect their function or durability.

DISHWASHER THE USING

49-55117

15

USING THE DISHWASHER

Care and cleaning

Filters

Inspect and clean the filters periodically. This should be done every other month or more depending on usage. If there is a decrease in wash performance or dishes feel gritty, this is also an indication the filters need to be cleaned.

The retaining posts can be a WARNING choke hazard for small children if

removed from the dishwasher. Keep out of reach of children.

Ultra-Fine Filter

To clean the Ultra-Fine Filter, remove the bottom rack. Twist the Ultra-Fine Filter counterclockwise and lift to remove. Rinse filter with warm soapy water and use

a sponge to carefully remove any stubborn particles. Scrubbing with scouring pads or brushes can damage the filter. Once cleaned, replace the Ultra-Fine Filter, and twist it clockwise to lock in place.

Fine Filter

To clean the Fine Filter (mesh plate), remove the bottom rack. Remove the Ultra-Fine Filter.

Twist each of the two retaining posts located toward the back bottom of the tub counterclockwise, and remove the Fine Filter. Rinse filter with warm soapy water. Scouring pads or brushes can scratch the filter surface but a soft brush or sponge may be needed to remove stubborn soils or calcium deposits caused by hard water. Once cleaned, replace the Fine Filter and the Ultra-Fine Filter. Twist the two retaining posts clockwise to lock in place.

Spray

Retaining Arm

Posts

Fine Ultra-Fine

Filter Filter

Protect Against Freezing

If your dishwasher is left in an unheated place during the winter, ask a service technician to:

	Turn off electrical power to the dishwasher. Remove		Drain water from the water inlet line and water valve.
1		3
	fuses or trip circuit breaker.		(Use a pan to catch the water.)
	Turn off the water supply and disconnect the water inlet		Reconnect the water inlet line to the water valve.
2		4
	line from the water valve.

Does Your Dishwasher Have an Air Gap?

An air gap protects your dishwasher against water backing up into it if a drain clogs. The air gap is not a part of the dishwasher. It is not covered by your warranty. Not all plumbing codes require air gaps, so you may not have one.

Air gap

Check the air gap any time your dishwasher isn’t draining well.

The air gap is easy to clean.

1 Turn off the dishwasher and lift off the air gap cover.

2 Remove the plastic cap under the cover and clean with a toothpick.

3 Replace the cap and cover when the air gap is clean.

16

49-55117

Troubleshooting Tips... Before you call for service

Problem	Possible Cause	What To Do
Start status indicator	The door was opened or the	Press the Start pad once and close the door within 4
light flashing	cycle was interrupted.	seconds to start the dishwasher. Press the Start pad a
		second time when the dishwasher is running only if you
		wish to cancel the cycle.
Dishwasher BEEPS	This is a reminder that your	Press Start and close the door.
once every minute	dishwasher door has been left
(on some models)	open during operation. It will
	continue beeping until you
	press Start and close the door.
Beeping at the end	This is normal. Dishwasher	To turn off the double beep indicator (or re-activate it if
of the cycle (on	will beep twice at the end of	it was previously turned off), press the Heated Dry pad 5
some models)	the cycle.	times within 3 seconds. A triple beep will sound to indicate
		the end-of-cycle beep option has been turned on or off.
Dishes and flatware	Ultra-Fine Filter or Fine	See the Care and Cleaning section.
not clean	Filter is clogged
	Low inlet water temperature	Make sure inlet water temperature is correct (see the
		USING THE DISHWASHER section). Turn on the hot
		water faucet nearest the dishwasher, let run until the water
		temperature stops rising. Then start the dishwasher and
		turn off the faucet. This ensures the entering water is hot.
		Select Wash Temp Boost if available.
	Water pressure is	Turn on a faucet. Is water coming out more slowly than usual?
	temporarily low	If so, wait until pressure is normal before using your dishwasher.
		Normal water pressure to the dishwasher should be 20-120 psi.
	Air gap or disposer clogged	Clean the air gap or flush the disposer.
	High drain loop or air gap	Refer to the Installation Instructions for proper drain line
	not installed	installation.
	Improper rack loading	Make sure large dishware does not block the detergent
		dispenser or the wash arms. See the Loading section.
		When large utensils are placed in the silverware basket,
		do not mount the basket on the door (on some models).
		Instead, mount basket on the lower rack.
	Poor performing detergent	Use a highly rated detergent such as Finish® Quantum®
		Automatic Dishwashing Detergent.
Spots and filming	Extremely hard water	Use rinse agents such as Finish® Jet-Dry® Rinse Aid to
on glasses and		prevent spots and prevent new film build-up.
flatware		If water is extremely hard, a softener may be required.
	Low inlet water temperature	Make sure water temperature is at least 120°F (49°C).
	Overloading or improper	Load dishwasher as shown in the Loading section.
	loading of the dishwasher
	Old or damp powder	Make sure detergent is fresh. Use a highly rated
	detergent	detergent such as Finish® Quantum® Automatic
		Dishwashing Detergent.
	Rinse agent dispenser empty	Refill with rinse agent such as Finish® Jet-Dry® Rinse Aid.
	Too little or low performing	Make sure you use the proper amount of highly rated
	detergent	detergent.
Cloudiness on	Combination of soft water	This is called etching and is permanent. To prevent this
glassware	and too much detergent	from happening, use less detergent if you have soft water.
		Wash glassware in the shortest cycle that will get it clean.
	Low performing phosphate-	See A white film on glassware, dishware and the
	free detergent	interior in this TROUBLESHOOTING section.
	Water temperature entering	This could be etching. Lower the water heater
	the dishwasher exceeds	temperature.
	150°F (66°C)

TIPS TROUBLESHOOTING

49-55117

17

TROUBLESHOOTING TIPS

Troubleshooting Tips... Before you call for service

	Problem	Possible Cause	What To Do
	Suds in the tub	Wrong detergent	Use only automatic dishwasher detergents to avoid sudsing.
			Finish® Quantum® Automatic Dishwashing Detergent
			has been approved for use in all GE Appliances
			dishwashers.
			To remove suds from the tub, open the dishwasher and
			let suds dissipate. Pump out water by pressing Start and
			close the door. Wait 30 seconds. Open the door, press
			and hold Start for 3 seconds, and close the door. Repeat
			if necessary.
		Rinse agent was spilled	Always wipe up rinse agent spills immediately.
	Detergent left in	Dishes or utensils are	Reposition the dishes, so the water from the lower spray
	dispenser cups	blocking the detergent cup	arm can flush the detergent cup. See the Loading section.
			Reposition the tall utensils or heavy silverware that may
			be keeping the dispenser cup door from opening. See
			the Loading section.
	Black or gray marks	Aluminum utensils have	Remove marks with a mild, abrasive cleaner.
	on dishes	rubbed against dishes
	Dishes don’t dry	Low inlet water temperature	Make sure inlet water temperature is at least 120°F.
			Select Heated Dry.
			Use Wash Temp Boost.
			Select a higher cycle, such as Wash Temp Sani,
			Sanitize Temp or Heavy.
		Rinse agent dispenser is	Check the rinse agent dispenser and fill as required.
		empty
		Cycle selection	If using Light cycle which uses lower water temperature
			and thus limited dry performance, switch to a different cycle.
		Cycle completion	Allow cycles to fully complete. See Long cycle times in
			this Troubleshooting Tips section
	Long cycle times	Dishwasher washes by	Longer cycles are normal. For best wash and dry
		alternating mid and lower	performance, let cycle complete.
		spray arms
		Soil level	The turbidity sensor senses how much soil is on the
			dishes. Heavy soiled dish loads will add more time to
			the cycle. This is normal function. For best wash and dry
			performance, allow cycle to complete.
	Control panel	Door may not be completely	Make sure the door is firmly closed.
	responded to inputs	closed
	but dishwasher
		Water valve may be turned	Make sure water valve (usually located under the sink) is
	never filled with
		off	turned on.
	water
		Flood float may be stuck	Remove Ultra-Fine filter and lightly tap the piece under the
			ultra fine filter that looks like a salt shaker. Replace the filter.

18

49-55117

Troubleshooting Tips... Before you call for service

Problem	Possible Cause					What To Do
Stained tub interior	Some tomato-based foods	Use of the Steam cycle (on some models) after adding
	can cause reddish stains	the dish to the load can decrease the level of staining.
	Tea or coffee stains	Remove the stain by hand, using a solution of 1/2 cup
		bleach and 3 cups warm water. NOTE: Do not use
		bleach on stainless steel inner door.
						Before cleaning interior, wait at
				CAUTION
						least 20 minutes after a cycle for
			the heating elements to cool down. Failure to do so
			can result in burns.
	An overall yellow or brown		A special filter in the water supply line is the only way to
	film can be caused by iron		correct this problem. Contact a water softener company.
	deposits in water
	White film on inside		GE Appliances recommends Finish® Jet-Dry® Rinse Aid
	surface— hard water		to help prevent hard water mineral deposits from forming.
	minerals		Run dishwasher with citric acid to remove mineral
			deposits. Citric acid (Part number: WD35X151) can be
			ordered through GE Appliances Parts. See back cover
			for ordering information. Alternatively, purchase Finish®
			Dishwasher Cleaner and follow the directions on the
			label.
Dishwasher won’t	Fuse is blown or circuit		Replace fuse or reset circuit breaker. Remove any other
run	breaker is tripped		appliances from the circuit.
	Power is turned off		In some installations, the power to the dishwasher is
			provided through a wall switch, often located next to the
			disposer switch. Make sure it is on.
	Control panel is locked		Unlock control panel. See the Getting started section.
Control panel lights	Time too long between		Each pad must be touched within 30 seconds of the
go off when you’re	touching of selected		others. To relight, touch any pad again or open the door
setting controls	buttons		and unlock (top control).
Water standing in	Air gap is clogged		Clean the air gap. See the Care and Cleaning section.
the bottom of the
	High drain loop or air gap		Refer to the Installation Instructions for proper drain line
tub
	not installed		installation.
Water won’t pump	Drain is clogged		If you have an air gap, clean it. See the Care and
out of the tub			Cleaning section.
			If the dishwasher drains into a disposer, run disposer clear.
			Check to see if your kitchen sink is draining well. If not,
			you may need a plumber.

TIPS TROUBLESHOOTING

49-55117

19

TROUBLESHOOTING TIPS

Troubleshooting Tips... Before you call for service

Problem	Possible Cause	What To Do
Steam	This is normal	Warm, moist air comes through the vent during drying and
		when water is being pumped out. This is necessary for drying.
Sanitized light does	The door was opened and	Do not interrupt the cycle by opening the door during the
not illuminate at the	the cycle was interrupted	wash cycle.
end of the cycle	during final rinse
	The incoming water	Raise the water heater temperature to between 120°F
	temperature was too low	and 150°F.
Noise	Normal operating sounds:	These are all normal. No action is required.
	Beeping at the end of the
	cycle (on some models)
	Detergent cup opening
	Water entering dishwasher
	Motor stops and starts at
	various times during cycle
	Spray arms start and stop
	at various times
	Drain pump sounds during
	pump out
	Drain pump starts and
	stops several times during
	each drain
	Rattling dishes when the	Make sure dishes are properly loaded. See the Loading
	spray arm rotates	section.
	Rattling silverware against	Tall utensils may be placed in the upper rack to avoid
	door during wash	bumping against inner door during wash cycle.
A white film on	This problem is likely	To remove the white film, run your dishes through a
glassware, dishware	caused by a low quality	dishwasher cycle with citric acid. Use a WD35X151
and the interior	phosphate-free dishwasher	citric acid kit found online. Otherwise, use Finish®
	detergent	Dishwasher Cleaner found at your local grocery store.
		Pour the citric acid in the detergent cup and close the
		cover. Place the filmed but otherwise clean glassware and
		dishware in the dishwasher. Leave silverware and other
		metal items out of the dishwasher. Turn the dishwasher on
		and let it run through a complete cycle without detergent.
		The glassware, dishware, and dishwasher should come out
		film free. Alternatively, a vinegar rinse may be used. Pour 1
		cup of vinegar into dishwasher just after the detergent cup
		opens and let the dishwasher complete its cycle.
		This may be repeated several times a year as needed.
		The use of a rinse agent such as Finish® Jet-Dry®
		Rinse Aid may help minimize a repeat build up of film.
		Also, the use of a highly rated detergent such as Finish®
		Quantum® Automatic Dishwashing Detergent will help
		prevent film build-up.

20

49-55117