Page 1
Product Highlights
10 Gigabit Connectivity
10G physical stacking and/or uplink eliminates the
bottleneck of stacking backbone servers, and storage
accesses
Comprehensive Management
Intuitive graphical Web UI complete with 10 languages
for SMB; Comprehensive Command Line Interface (CLI)
and SNMP for Out-of-band console management
Layer 3 Lite Functions
Wired speed inter-VLAN routing helps by reducing the
pressure of routers and backbone networks, improving
the overall network eciency
DGS-1510 Series
Gigabit Stackable Smart Managed Switches
Features
Advanced Features
• Physical Stacking via 2 10G ports, stack up to 6
devices
• Single IP Management (Virtual Stacking), stack
up to 32 devices
• Static Routing
• Auto Surveillance VLAN
• Auto Voice VLAN
• Loopback Detection
• LLDP/LLDP-MED
Security Features
• Access Control List
• D-Link Safeguard Engine
• BPDU Attack Protection
• ARP Spoong Prevention
• IP-MAC-Port Binding
• DoS Attack Prevention
• Clientless MAC/Web Access Control
Intuitive Management
• Multi-language Web-based GUI
• Built-in SNMP MIB for remote Network
Management Systems
• Comprehensive CLI support
• Manageability in both IPv4/IPv6 environments
• Dual Image
• D-Link Network Assistant (DNA) Utility for Easy
Installation
• Console Interface for Out-of-band Management
Green Technology
• IEEE 802.3az Energy Ecient Ethernet
• D-Link Green 3.0 power-saving features
The DGS-1510 Series is D-Link’s latest generation of Smart Managed switches with 10G port
connectivity, making them ideal for deployment in SME/SMB aggregation environments.
The DGS-1510 Series provides a reliable and scalable interconnection between core switches
and edge switches with rich capabilities and simplied exibility. Available in 16, 24 or 48
10/100/1000 Mbps port models, with additional bre ports for physical stacking and / or
uplinks.
The DGS-1510 Series PoE-enabled switches are ideal for businesses looking to power VoIP
phones, wireless access points or network cameras. The DGS-1510-28P 24-port PoE Switch
supports up to 30W of power output giving you exibility in power allocation for a variety
of powered devices. This enables you to scale your operations to meet business growth and
incorporate new technologies all with aordable installation costs.
10G SFP+ Stacking/Uplink Ports
Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one
or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be
congured as a stack using optional direct attach cables to provide high bandwidth on the
DGS-1510 Series with cost eciency. Users can mix from any of the DGS-1510 Series in a single
stack to allow simultaneous and easy conguration, management and troubleshooting. With
20Gbps full duplex, the DGS-1510 Series oers 10G connectivity to core networks as well as
servers with 10G capability while maintaining high performance and minimal impact to the
data transfer rates.
Layer 3 Trac Management
The DGS-1510 Series provides static route, allowing you to segment your network into
workgroups and communicate across VLANs without degrading application performance.
With these capabilities, you can boost the eciency of your network by ooading internal
trac-handling tasks from your router and allowing it to manage external trac and security.
Page 2
DGS-1510 Series Gigabit Stackable Smart Managed Switches
Extensive Layer 2 Features
The DGS-1510 Series switches are equipped with a complete lineup of Layer
2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link
Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows
servers to directly connect to the switch for fast, reliable data transfer. Network
maintenance features include Loopback Detection and Cable Diagnostics.
Loopback Detection is used to detect loops created by a specic port or
VLAN and automatically shuts down the aected port or VLAN. The Cable
Diagnostics feature, designed primarily for administrators and customer
service representatives, can quickly discover the type of error on cables as well
as determine cable quality.
If the worst should happen to your network you need the very best
support and fast. Downtime costs your business money. D-Link
Assist maximises your uptime by solving technical problems
quickly and eectively. Our highly trained technicians are on
standby around the clock, ensuring that award-winning support
is only a phone call away.
Trac Classication & QoS
The DGS-1510 Series supports Auto Surveillance VLAN (ASV) and Auto Voice
VLAN, which are best suited for VoIP and video surveillance deployments.
Auto Surveillance VLAN is a new, industry-leading technology built into
D-Link Smart Switches. This technology consolidates data and surveillance
video transmission through a single Smart Managed switch, sparing
businesses the expense of maintaining expensive dedicated hardware and
facilities. ASV also ensures the quality of real-time video for monitoring and
control without compromising the transmission of conventional network
data. The Auto Voice VLAN technology enhances VoIP service by automatically
placing voice trac from an IP phone to an assigned VLAN. With higher priority
and an individual VLAN, these features guarantee the quality and security of
VoIP trac. Furthermore, the DSCP markings on Ethernet packets enable
dierent levels of service to be assigned to network trac. As a result, these
voice and video packets take precedence over other packets. In addition, with
per ow Bandwidth Control, network administrators can reserve bandwidth
for important functions that require more bandwidth or might require high
priority.
Securing Your Network
D-Link’s innovative Safeguard Engine protects the switches against trac
ooding caused by malicious attacks. The switches also support 802.1X port-
based authentication, allowing the network to be authenticated through
external RADIUS servers.
The DGS-1510 Series has both MAC & Web-based Access Control supported,
these provide a user friendly way to alleviate deployment time, giving
customers an eective and ecient authentication choice without the
complexity in securing their networks.
With a choice of three aordable service oerings covering all
D-Link business products, you can select the package that suits
you best:
D-Link Assist Gold - for comprehensive 24-hour support
D-Link Assist Gold is perfect for mission-critical environments
where maximum uptime is a high priority. It guarantees four hour
around-the-clock response. Cover applies 24/7 for every day of the
year including holidays.
D-Link Assist Silver - for prompt same-day assistance
D-Link Assist Silver is designed for ‘high availability ’ businesses that
require rapid response within regular working hours. It provides a
four hour response service Monday to Friday from 8am to 5pm,
excluding holidays.
D-Link Assist Bronze - for guaranteed response on the
next business day
D-Link Assist Bronze is a highly cost-eective support solution for
less critical environments. Response is guaranteed within eight
business hours Monday to Friday from 8am to 5pm, excluding
holidays.
D-Link Assist can be purchased together with any D-Link business
product. So whether you’re buying switching, wireless, storage,
security or IP Surveillance equipment from D-Link, your peace
of mind is guaranteed. D-Link Assist also oers installation and
conguration services to get your new hardware working quickly
and correctly.
Additionally, the Access Control List (ACL) feature enhances network security
and helps to protect the internal IT network by screening ingress trac based
on any user dened content. The DGS-1510 Series includes ARP Spoong
Prevention, which protects from attacks on the Ethernet network that may
allow an intruder to sni data frames, modify trac, or bring trac to a halt
altogether by sending fake ARP messages to the network. For added security,
the DHCP Server Screening feature screens rogue DHCP server packets from
user ports to prevent unauthorized IP assignment.
Page 3
DGS-1510 Series Gigabit Stackable Smart Managed Switches
IPv6 Ready
The DGS-1510 Series is IPv6 ready and supports various IPv6 functions such
as MLD Snooping, IPv6 ACL/QoS, and IP-MAC-Port Binding (IMPB) to ensure
seamless integration of next generation networks. The DGS-1510 Series also
supports a IPv4/v6 dual stack function that allows the switch to act as a bridge
between IPv4 and IPv6 networks.
Versatile Management
The DGS-1510 Series supports virtual stacking via D-Link’s Single IP
Management (SIM), allowing up to 32 devices to be managed via a single
IP. This simplies management of small workgroups or wiring closets while
reducing the number of IP address needed in your network.
The DGS-1510 Series provides a D-Link Network Assistant Utility and a web-
based management interface that enables administrators to easily setup and
remotely manage their networks respectively. The D-Link Network Assistant
Utility allows customers to easily discover and perform initial setup on multiple
D-Link products simultaneously. This greatly reduces the deployment time for
services required by network administrators such as device rmware upgrades,
conguration backup and restoration, setting IP addresses or even solution
deployment like ASV.
The DGS-1510 Series also supports fully featured Command Line Interface (CLI)
and SNMP MIBs. It provides the capability of central management in a large
scale network. CLI management of the switches is also available via console
port. With out-of-band manageability (console), accessing the switch is still
possible even if its network data plane is overwhelmed by bulk or malicious
trac.
DGS-1510-20
DGS-1510-28
DGS-1510-28P
DGS-1510-28X
Energy Saving
DGS-1510 Series switches are capable of conserving power without
sacricing operational performance or functionality by using D-Link Green
3.0 technology. Using the 802.3az Energy Ecient Ethernet standard, the
network will automatically decrease the power usage when trac is low with
no setup required. For environments not fully supporting the standard, DGS-
1510 switches oer advanced power-saving settings including port shuto,
LED shuto, and system hibernation based on custom scheduling proles. The
proles can also be applied to the PoE switch so that there is no unnecessary
power consumption during o hours.
DGS-1510-52
DGS-1510-52X
Page 4
DGS-1510 Series Gigabit Stackable Smart Managed Switches
Technical Specications
General DGS-1510-20 DGS-1510-28 DGS-1510-52
Port Standards & Functions
Number of Ports
Network Cables
Full/Half Duplex Full/half duplex for 10/100 Mbps and Gigabit speed
Media Interface Exchange Auto or configurable MDI/MDIX
IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit
Ethernet, 802.3ae 10 GbE, IEEE 802.3x Flow Control for Full-Duplex Mode, Auto-negotiation
16 10/100/1000 Mbps,
2 Gigabit SFP,
2 10G SFP+
24 10/100/1000 Mbps,
2 Gigabit SFP,
2 10G SFP+
UTP Cat. 5, Cat. 5e (100 m max.)
EIA/TIA-568 100-ohm STP (100 m max.)
48 10/100/1000 Mbps,
2 Gigabit SFP,
2 10G SFP+
Performance
Switching Capacity 76 Gbps 92 Gbps 140 Gbps
Transmission Method Store-and-forward
MAC Address Table Up to 16,000 entries per device
MAC Address Update
Maximum 64 bytes Packet
Forwarding Rate
Packet Buffer Memory 1.5 MB per device 3 MB per device
MTBF 882152.37 hours 516593.25 hours 433434.16 hours
56.54 Mpps 68.45 Mpps 104.16 Mpps
Enable/disable auto-learning of MAC addresses
Up to 512 static MAC entries
Physical & Environment
AC Input 100 to 240 VAC 50/60 Hz internal universal power supply
Maximum Power Consumption 20.3 W 24 W 38.4 W
Standby Power Consumption 12.2 W 15.2 W 27.6 W
Smart Fan Quantity 1 1 2
Acoustics 43.8 dB(A) 43.8 dB(A) 44.2 dB(A)
Heat Dissipation 41.602 BTU/hr 72.292 BTU/hr 130.944 BTU/hr
Operation Temperature -5 to 50 ˚C (23 to 122 ˚F)
Storage Temperature -20 to 70˚C (-4 to 158 ˚F)
Operation Humidity 0% to 95% non-condensing
Storage Humidity 0% to 95% non-condensing
280 x 180 x 44 mm
Dimensions
Weight 1.24 kg 2.00 kg 2.40 kg
Diagnostic LEDs
(11 x 7.09 x 1.73 inches)
19” standard rack mounting
width, 1U height
Power/Stacking ID/Fan (per device), Link/Activity/Speed (per 10/100/1000 Mbps port), Link/
Activity/Speed (per Gigabit SFP port), Link/Activity/Speed (per 10G SFP+ port)
440 x 210 x 44 mm
(17.36 x 8.26 x 1.73 inches)
19” standard rack mounting
width, 1U height
440 x 250 x 44 mm
(17.36 x 9.84 x 1.73 inches)
19” standard rack mounting
width, 1U height
Certifications CE, FCC, C-Tick, VCCI, BSMI, CCC
Safety cUL, CB
Page 5
DGS-1510 Series Gigabit Stackable Smart Managed Switches
Technical Specications
General DGS-1510-28X DGS-1510-52X
Port Standards & Functions
Number of Ports 24 10/100/1000Mbps, 4 10G SFP+ 48 10/100/1000Mbps, 4 10G SFP+
Network Cables UTP Cat. 5, Cat. 5e (100 m max.); EIA/TIA-568 100-ohm STP (100 m max.)
Full/Half Duplex Full/half duplex for 10/100 Mbps and Gigabit speed
Media Interface Exchange Auto or configurable MDI/MDIX
IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit
Ethernet, 802.3ae 10 GbE, IEEE 802.3x Flow Control for Full-Duplex Mode, Auto-negotiation
Performance
Switching Capacity 128Gbps 176Gbps
Transmission Method Store-and-forward
MAC Address Table Up to 16,000 entries per device
MAC Address Update Up to 512 static MAC entries, Enable/disable auto-learning of MAC addresses
Maximum 64 bytes Packet Forwarding Rate 95.24Mpps 130.95Mpps
Packet Buffer Memory 1.5 MB per device 3MB per device
MTBF 516593.25 hours
416789.03 hours
Physical & Environment
AC Input 100 to 240 VAC 50/60 Hz internal universal power supply
Maximum Power Consumption 22.3 Watts 44.2 Watts
Standby Power Consumption 15.2 W 28.9 W
Smart Fan Quantity 1 2
Acoustics 42.7 dB(A) 45.8 dB(A)
Heat Dissipation 76.043 BTU/hr 138.787 BTU/hr
Operation Temperature -5 to 50 ˚C (23 to 122 ˚F)
Storage Temperature -20 to 70˚C (-4 to 158 ˚F)
Operation Humidity 0% to 95% non-condensing
Storage Humidity 0% to 95% non-condensing
Dimensions 440mm x 210mm x 44mm 440mm x 250mm x 44mm
Weight 2.00 kg 2.40 kg
Diagnostic LEDs
Certifications CE, FCC, C-Tick, VCCI, BSMI, CCC
Safety cUL, CB
Power/Stacking ID/Fan (per device), Link/Activity/Speed (per 10/100/1000 Mbps port), Link/
Activity/Speed (per Gigabit SFP port), Link/Activity/Speed (per 10G SFP+ port)
Page 6
Gigabit Stackable Smart Managed Switches
Technical Specications
General DGS-1510-28P
DGS-1510 Series PoE
Port Standards & Functions
Number of Ports 24 10/100/1000 Mbps PoE capable, 2 Gigabit SFP, 2 10G SFP+
Network Cables UTP Cat. 5, Cat. 5e (100 m max.); EIA/TIA-568 100-ohm STP (100 m max.)
Full/Half Duplex Full/half duplex for 10/100 Mbps and Gigabit speed
Media Interface Exchange Auto or configurable MDI/MDIX
IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit
Ethernet, 802.3ae 10 GbE, IEEE 802.3x Flow Control for Full-Duplex Mode, Auto-negotiation
Performance
Switching Capacity 92 Gbps
Transmission Method Store-and-forward
MAC Address Table Up to 16,000 entries per device
MAC Address Update Up to 512 static MAC entries, Enable/disable auto-learning of MAC addresses
Maximum 64 bytes Packet
Forwarding Rate
Packet Buffer Memory 1.5 MB per device
MTBF 275428.54 hours
68.45 Mpps
PoE
PoE Standard IEEE 802.3af, 802.3at
PoE Capable Ports Ports 1 to 24: Up to 30 W
PoE Power Budget Max. 193 W
Physical & Environment
AC Input 100 to 240 VAC 50/60 Hz internal universal power supply
Maximum Power Consumption 238.7 W (PoE on), 29 W (PoE off)
Standby Power Consumption 21 W
Smart Fan Quantity 2
Acoustics 46.4 dB(A)
Heat Dissipation 813.967 BTU/hr
Operation Temperature -5 to 50 ˚C (23 to 122 ˚F)
Storage Temperature -20 to 70˚C (-4 to 158 ˚F)
Operation Humidity 0% to 95% non-condensing
Storage Humidity 0% to 95% non-condensing
Dimensions
Weight 2.54 kg
440 x 210 x 44 mm (17.36 x 8.26 x 1.73 inches)
19” standard rack mounting width, 1U height
Diagnostic LEDs
Certifications CE, FCC, C-Tick, VCCI, BSMI, CCC
Safety cUL, CB
Power/Stacking ID/Fan Error/PoE Push Button (per device), Link/Activity/Speed/PoE Mode (per 10/100/1000
Mbps port), Link/Activity/Speed (per SFP port), Link/Activity/Speed (per 10G SFP+ port)
Page 7
Software Features
DGS-1510 Series Gigabit Stackable Smart Managed Switches
Stackability • Virtual Stacking Support
L2 Features • MAC Address Table: Up to 16K
VLAN • 802.1Q Tagged VLAN
Quality of Service (QoS) • CoS based on
• D-Link Single IP Management
• Up to 32 devices per virtual stack
• Up to 20G stacking bandwidth
• Flow Control
• 802.3x Flow Control
• HOL Blocking Prevention
• Jumbo Frame up to 9000 Bytes
• IGMP Snooping
• IGMP v1/v2 Snooping
• IGMP v3 awareness
• Supports 512 IGMP groups
• Supports 128 static multicast addresses
• IGMP per VLAN
• Supports IGMP Snooping Querier
• Host-based IGMP Snooping Fast Leave
• MLD Snooping
• Supports MLD v1/v2 awareness
• Supports 512 groups
• Supports 128 Static Multicast Addresses
• Per VLAN MLD Snooping
• Host-based MLD Fast Leave
• MLD Snooping Querier
• 4K VLAN Groups
• Configurable VID: 0~4094
• GVRP
• 802.1p priority
• VLAN
• MAC address
• Ether type
• IP address
• DSCP
• Protocol type
• TCP/UDP port number
• DSCP of IPv6 Traffic Class
• IPv6 flow label
• Physical Stacking
• Supports Duplex Chain/Ring topology
• Up to 40G stacking bandwidth full duplex
• Up to 6 units per stack
• Spanning Tree Protocol
• 802.1D STP
• 802.1w RSTP
• 802.1s MSTP
• Loopback Detection
• 802.3ad Link Aggregation
• Max. 32 groups per device/8 ports per group
• Port Mirroring
• Support 4 mirroring groups
• One-to-One, Many-to-One
• Supports Mirroring for Tx/Rx/Both
• Multicast Filtering
• Forwards all unregistered groups
• Filters all unregistered groups
• ERPS (Ethernet Ring Protection Switching)
• Asymmetric VLAN
• Auto Voice VLAN
• Auto Surveillance VLAN
• 802.1p Quality of Service
• Queue Handling
• Strict Priority Queue (SPQ
• Weighted Round Robin ( WRR)
• Deficit Round Robin (DRR)
• SPQ + WRR
• 8 queues per port
• Bandwidth Control
• Port-based (Ingress/Egress, min. granularity for
10/100/1000 BASE-T ports is 64 Kb/s)
L3 Features • ARP
Access Control List (ACL) • ACL based on
Security • Port Security
AAA • Compound Authentication
• 256 Static ARP
• Supports Gratuitous ARP
• IPv6 Neighbour Discovery (ND)
• 16 IP interfaces
• 802.1p priority
• VLAN
• MAC address
• Ether type
• IP address
• DSCP
• Protocol type
• TCP/UDP port number
• DSCP of IPv6 Traffic Class
• IPv6 flow label
• Supports up to 128 MAC addresses per port
• Broadcast/Multicast/Unicast Storm Control
• Dynamic ARP Inspection
• Static MAC
• D-Link Safeguard Engine
• DHCP Server Screening
• ARP Spoofing Prevention
• Max. 64 entries
• SSH
• Supports v2
• Supports IPv4/IPv6
• BPDU Attack Protection
• DoS Attack Prevention
• 802.1X Port and MAC-based Authentication
• Supports RADIUS and Local Server
• Supports EAP, OTP, TLS, TTLS, PEAP
• Web-based Access Control (WAC)
• Port-based Access Control
• Host-based Access Control
• Dynamic VLAN Assignment
• Guest VLAN
• RADIUS and TACACS+ authentication for switch access
• RADIUS and TACACS+ accounting
• Default Routing
• Static Routing
• 64 IPv4 Static Route Entries
• 32 IPv6 Static Route Entries
• ACL Actions
• Permit
• Deny
• Max. 256 access list
• Max. 768 rules
• Single or multiple ports (each rule)
• Time-based ACL
• ACL Statistics
• SSL
• Supports v1/v2/v3
• Supports IPv4/IPv6
• Traffic Segmentation
• IP-MAC-Port Binding
• DHCP snooping
• IP Source Guard
• Dynamic ARP Inspection
• DHCPv6 Guard
• IPv6 RA Guard
• IPv6 Snooping
• IPv6 Source Guard
• IPv6 ND Inspection
• MAC-based Access Control (MAC)
• Port-based Access Control
• Host-based Access Control
• Dynamic VLAN Assignment
• Japan Web-based Access Control (JWAC)
• Port-based Access Control
• Host-based Access Control
• Dynamic VLAN Assignment
Page 8
DGS-1510 Series Gigabit Stackable Smart Managed Switches
Software Features
OAM • Cable Diagnostics • Factory Reset
Management • Command Line Interface (CLI)
• Telnet Server
• TFTP Client
• IPv6 Neighbor Discovery
• Configurable MDI/MDIX
• SNMP
• Supports v1, v2c, v3
• SNMP Trap
• System Log
• Max. 10,000 log entries
• Debug command
• Dual images
• DHCP Client
D-Link Green 3.0 Technology • Power Saving by:
• Link Status
• LED or Port Shutoff
• D-Link Network Assistant support
• SNTP
• ICMPv6
• IPv4/v6 Dual Stack
• DHCP Auto Configuration
• RMON v1
• LLDP, LLDP-MED
• DHCP relay
• Web-based GUI
• TFTP Client
• sFow
• NTP (RFC5905)
• System Hibernation mode
• Time-based PoE (PoE model only)
Optional SFP Transceivers
DEM-310GT 1000BASE-LX, single-mode, 10 km
DEM-311GT 1000BASE-SX, multi-mode, 550 m
DEM-312GT2 1000BASE-SX, multi-mode, 2 km
DEM-314GT 1000BASE-LHX, single-mode, 50 km
Optional SFP+ Transceivers
DEM-431XT 10GBASE-SR SFP+ Transceiver (without DDM), 80m: OM1 & OM2 MMF,300m: OM3 MMF
DEM-431XT-DD 10GBASE-SR SFP+ Transceiver (with DDM), 80m: OM1 & OM2 MMF, 300m: OM3 MMF
DEM-432XT 10GBASE-LR SFP+ Transceiver (without DDM), 10km
DEM-432XT-DD 10GBASE-LR SFP+ Transceiver (with DDM), 10km
Optional SFP+ Direct Attach Stacking Cables
DEM-CB100S 10-GbE SFP+ 1 m Direct Attach Cable
DEM-CB300S 10-GbE SFP+ 3 m Direct Attach Cable
For more information: www.dlink.com
D-Link European Headquarters. D-Link (Europe) Ltd., D-Link House, Abbey Road, Park Royal, London, NW10 7BX.
Specications are subject to change without notice. D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries.
All other trademarks belong to their respective owners. ©2014 D-Link Corporation. All rights reserved. E&OE.
Updated February 2015
Loading...