Operating Manual
PORTABLE LCD DVD PLAYER
Model: MT-776 WHITE
READ THESE INSTRUCTIONS INCLUDED IN THIS IM THOROUGHLY PRIOR TO CONNECTING AND OPERATING.
PLEASE RETAIN THIS MANUAL IN CASE YOU MAY NEED IT FOR FUTURE REFERENCE.
THE ILLUSTRATIONS & GRAPHICS HEREIN ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE.
ALL RIGHTS RESERVED, COPY RIGHT DENVER ELECTRONICS A/S,www.denver-electronics.com
OVERVIEW OF THE DVD PLAYER:
1 |
|
|
|
2 |
|
|
|
3 |
|
15 |
|
4 |
|
||
5 |
|
16 |
|
6 |
|
17 |
|
7 |
8 |
||
18 |
|||
9 |
|
|
19
20
10 |
11 |
13 14 |
12
21 22
1.TFT SCREEN
2.SPEAKERS
3.TFT ON/OFF KEY
4.STOP & USB/SD/MMC CARD KEY
5.NAVIGATION UP KEY
6.PLAY/PAUSE KEY
7.VOLUME- / NAVIGATION LEFT KEY
8.VOLUME +/NAVIGATION RIGHT KEY
9.OK KEY
10.DISC COVER
11.DISC COVER OPEN KEY
12.PREVIOUS & F_BWD KEY
13.SETUP/NAVIGATION DOWN KEY
14.NEXT & F_FWD KEY
15.DC IN JACK
16.SD/MMC CARD SLOT
17.POWER ON/OFF SWITCH
18.A/V OUT JACK
19.PHONE JACK
20.USB PORT
21.BUILT-IN BATTERY
22.CHARGE INDICATOR / REMOTE SENSOR / POWER INDICATOR
Remote control unit
|
|
1. SCREEN ON/OFF & BRI/COL button |
|
|
|
2. TITLE button |
|
1 |
12 |
3. MENU button |
|
|
|
4. PREVIOUS & F_BWD button |
|
2 |
13 |
5. NEXT & F_FWD button |
|
6. NAVIGATION UP button |
|||
3 |
|
||
14 |
7. NAVIGATION LEFT button |
||
4 |
|||
8. OK/PLAY/PAUSE button |
|||
5 |
15 |
||
9. NUMERIC buttons |
|||
6 |
|
||
|
10. PROGRAM/ANGLE button |
||
|
|
||
7 |
16 |
11. VOLUMEbutton |
|
8 |
|
12. MUTE button |
|
17 |
13. SETUP button |
||
|
18 |
14. DISPLAY button |
|
|
15. STOP&USB/SD/MMC CARD button |
||
|
|
||
9 |
19 |
16. NAVIGATION RIGHT button |
|
17. NAVIGATION DOWN button |
|||
|
|||
|
20 |
18. SUBTITLE button |
|
|
21 |
19. AUDIO button |
|
10 |
20. SEARCH button |
||
|
22 |
21. REPEAT button |
|
11 |
23 |
22. ZOOM/SLOW button |
|
|
|
23. VOLUME+ button |
1
CONNECT DVD PLAYER TO OTHER APPLIANCES
It is recommended you connect the player to a multi-system TV.
Ensure that this player and other appliances (TV set and amplifier) that will be connected to the player are set to OFF mode and that the AC cords are disconnected from the wall outlet.
Avoid blocking ventilation holes of the connected appliances and make sure air around there can circulate freely.
Read carefully and follow the instructions before connecting other appliances.
Observe the color coding when connecting audio and video cables, for instance connect yellow plug to the yellow jack, the red plug to the red jack and so on. If the A/V cable is not applicable with the A/V input jacks of TV set, an A/V connected cable is necessary. Please connect the A/V cable to the A/V connected cable firstly, then connect to the TV set for audio/vedio output.
AUDIO R AUDIO L VIDEO IN |
S-VIDEO |
YUV INPUT |
|
||
AV AUDIO/VIDEO INPUT |
|
|
TV SET
A/V cable
CHARGE THE BUILT-IN BATTERY
The player is with a rechargeable lithium battery. Before using the battery, please make sure it is charged. If not, charge it first. Slide the power switch to OFF position and then connect one end of the supplied adapter to the wall outlet and the other end to the unit for charging the built-in battery.
Note:
1.The battery only could be charged at powering off mode.
2.If the unit is not in use for a prolonged period of time, it is recommendable to charge the built-in battery each three months.
CONNECTING TO A CAR ADAPTOR
The car power adaptor is designed for use with vehicles that have a 12V, negative ground electrical system.
WARNING:
Disconnect the car power adaptor when not in use. Not in use in 24V vehicles.
To the cigarette lighter socket
CAUTIONS:
yUse the unit only with the recommended car power adaptor, use with other car power adaptor might damage the unit.
yThe recommended car power adaptor is for use with this unit only. Do not use it with other equipment.
yIn the interests of road traffic safety, do not operate the unit or view video software while driving a vehicle.
yMake sure the unit is fastened securely to prevent from moving outside of the vehicle in an accident
yWhen the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section may become hot due to poor contact. Be sure to clean the cigarette lighter socket before use.
yAfter use, disconnect the car power adaptor from both the unit and cigarette lighter socket.
FUSE REPLACEMENT
FUSE
POSITIVE(+) CAP
NOTE: Don't throw out the positive(+) cap when replace the fuse.
OPERATIONS
PREPARATION
Power on the TV set and select video input mode.
Power on the audio system which is connected to the player.
GET STARTED
1.Slide POWER ON/OFF switch to turn on the player.
2.Press disc cover Open button to open the disc tray.
3.Place a disc onto the disc tray.
4.Close the disc tray by hand and the playback starts automatically.
5.When a menu screen appears on the TV, press the navigation buttons or press the numeric buttons to select a preferred track number, then press OK button to start playback.
ADJUST THE VOLUME
Press the VOLUME +/- buttons on the remote or press and hold VOLUME +/- buttons on the unit to increase or reduce the volume.
MUTE
While the power is on, the audio output of the main unit is to be shut off by pressing the button. Press it again to resume sound output.
SKIP AHEAD OR BACK
Press PREV button during play to skip previous chapter (DVD) or a track (CD), Press NEXT button during play to skip next chapter (DVD) or a track (CD).
BRIGHTNESS AND COLOR ADJUSTMENT
During playback, press SCREEN ON/OFF&BRI/COL button repeatedly to adjust brightness and color respectively via navigation right/left button. Press and hold this button to turn on/off the screen.
RAPID ADVANCE/REVERSE
During playback, press and hold F_FWD button or F_BWD button to scan the disc forward or backward at X2, X4, X8, X20 normal speed.
Press PLAY button to resume normal play.
2