Denon DN-H800 Service Manual

Specifications and Main Features

CD Section
Number of Audio Channels: 2 Audio Stereo Channels
Range of Frequency Response: 20 ~ 20,000 Hertz (±1.0 dB)
The extent of high frequency distortion will be at maximum 0.02 percent (1 kHz)
Determined Signal to Noise Ratio: 94 decibels
Channel Channel Isolation: 85 Decibels
Type of Output: RCA jack
Level of Output: 2.0V
How to Control variable pitch:- ±12 % max.
Discs: We will only be providing Audio Compact Discs for 12cm (5in) and 8cm (3in) sets.
Tuner Section
Reception Frequency Band:
FM: 87.5 MHz to 108.0 MHz
AM:
520 KHz to 1710 KHz (American and Canadian Model)
522 KHz and 1611 KHz (European model)
Reception Sensitivity:
FM: 1.5 μV/75 Ω
AM: 20 nV
FM Stereo Separation: 1 kHz, 36 dB
Remote: From remote control connections to micro stereo jacks.
General Information
Headphone Output: Stereo (CD, Tuner)
20mW And up for Outputs Line:
Load impedance : 33 Ohm And over
Power:
usa and Canadian model: 120VAC-10% 60H
European Model: 230VAC10% 50H
Power:
American and Canadian Model 19W
For European Model 21W
Installation: Suitable for a 19 inch rack mounted with 3U

-Weight: 7.6 kg

---

What type of discs does DN-H800 support?
The supported audio compact discs are 12cm (5in) and 8cm (3in) H800 and Property.
Is the United States Canada specification applicable for the DN-H800? Detail the power supply requirement for this model.
For the United States or Canada model the power supply requirement Wait is 120 V AC ± 10 %, 60 Hz and for the Europe model it is 230 V AC ± 10 %, 50 Hz.
How can I check if a wired remote control is compatible with the DN-H800?
The DN-H800 does include a Wired remote control interface port (Stereo mini jack).
What is the maximum signal-to-noise ratio offered by the DN-H800 in decibels?
The maximum recorded signal to noise ratio measurement was 94 decibels.
What is the voltage level on the output for the CD section of the DN-H800?
A maximum output level on the CD section does not go beyond 2.0 Volt.

+ 27 hidden pages