• The appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Never clean by immersing the appliance in water.
• This is an household appliance only. It is not intended to be used in: sta kitchen
areas in shops, oces and other working environments; farm houses; by clients in
hotels, motels and other residential type environments; bed and breakfast type
environments.
• If the plug or cord is damaged, it must be replaced by Customer Services only to avoid
all risk.
FOR EUROPEAN MARKETS ONLY:
• This appliance can be used by children aged from 8 years and above if they have been
given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Cleaning and user maintenance shall not be made
by children unless they are above 8 years old and supervised. Keep the appliance and
power cord away from children under 8 years of age.
• The appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are supervised or have been given
instruction concerning use of the appliance in a safe way and if they understand the
hazards involved.
• Children shall not play with the appliance.
• Always unplug the appliance when left unattended and before assembly, taking apart
or cleaning.
Surfaces marked with this symbol become hot during use (the symbol is present in
certain models only).
115
2. SAFETY WARNINGS
2.1 Symbols used in these instructions
Important warnings are identied by these symbols. It is vital to
respect these warnings.
Danger!
Failure to observe the warning may result in life threatening
injury by electric shock.
Important!
Failure to observe the warning could result in injury or damage
to the appliance.
Danger of burns!
Failure to observe the warning could result in scalds or burns.
Please note:
This symbol identies important advice or information for the
user.
Danger!
This is an electrical appliance and may cause electric shock.
You should therefore follow these safety warnings:
• Never touch the appliance with damp hands or feet.
• Never touch the plug with damp hands.
• Make sure the socket used is freely accessible at all times,
enabling the appliance to be unplugged when necessary.
• Unplug directly from the plug only. Never pull the cord as
you could damage it.
• To disconnect the appliance completely you must unplug it
from the mains socket.
• If the appliance is faulty, do not attempt to repair. Turn it
o, unplug from the mains socket and contact Customer
Services.
• Before cleaning the appliance, turn it o, unplug from the
mains socket and allow to cool.
Important:
Keep all packaging (plastic bags, polystyrene foam) away from
children.
Danger of burns!
This appliance produces hot water and steam may form while
it is in operation.
Avoid contact with splashes of water or hot steam.
When the appliance is in operation, the cup shelf could become
very hot.
Any other use is considered improper and thus dangerous. The
manufacturer is not liable for damage deriving from improper
use of the appliance.
2.3 Instruction for Use
Read this Instruction for Use carefully before using the appliance. Failure to follow this Instruction for Use may result in injury or damage to the appliance.
The manufacturer is not liable for damage deriving from failure
to respect this Instruction for Use.
Please note:
Keep this Instruction for Use. If the appliance is passed to other
persons, they must also be provided with this Instruction for
Use.
3. INTRODUCTION
Thank you for choosing this bean to cup espresso and cappuccino machine.
We hope you enjoy using your new appliance. Take a few minutes to read this Instruction for Use. This will avoid all risks and
damage to the appliance.
3.1 Letters in brackets
The letters in brackets refer to the legend in the description of
the appliance on pages 2-3.
3.2 Troubleshooting and repairs
In the event of problems, rst try and resolve them by reading
the information given in sections “18. Displayed messages” and
“19. Troubleshooting”.
If this does not resolve the problem or you require further information, you should consult Customer Services by calling the
number given on the annexed “Customer Service” sheet.
If your country is not among those listed on the sheet, call the
number given in the guarantee. If repairs are required, contact
De’Longhi Customer Services only. The addresses are given in
the guarantee certicate provided with the machine.
2.2 Designated use
This appliance is designed and made to prepare coee and heat
drinks.
116
4. DESCRIPTION
4.1 Description of the appliance
(page 3 - A )
A1. Beans container lid
A2. Pre-ground coee funnel lid
A3. Beans container
A4. Pre-ground coee funnel
A5. Grinding adjustment dial
A6. Cup warmer shelf
A7. Coee spouts (adjustable height)
A8. Hot water/steam connection nozzle
A9. Condensate tray
A10. Coee grounds container
A11. Cup tray
A12. Drip tray
A13. Drip tray water level indicator
A14. Infuser door
A15. Infuser
A16. Water tank
A17. Water softener lter housing
A18. Water tank lid
A19. Power cord connector socket
A20. Main switch
4.2 Description of the control panel
(page 2 - B )
A number of buttons on the panel have a double function. This is
indicated in brackets in the description.
B1. button: turns the appliance on and o (standby)
B2. aroma selection button: to select the coee taste
B3. CAPPUCCINO button: to deliver a cappuccino
B4. CAFFELATTE button: to deliver a caelatte (When in the
settings menu, press to scroll through the menu)
B5. MACCHIATO button: to deliver a macchiato
B6. MILK MENU button: to access preparation of MILK, FLAT
WHITE, ESPRESSO, MACCHIATO and MY MILK
B7. button to deliver hot water
B8. button: to deliver steam (When in the settings menu,
press to scroll through the menu)
B9. button: to make 1 cup of LONG coee
B10. button: to make 2 cups of coee with the settings
displayed
B11. button: to make 1 cup of coee with the settings
displayed
B12. OK button: to enable and conrm the selected function
B13. Display: guides the user in using the appliance
B14. MENU/ESC button to enter the menu (When in the settings
menu, press to exit the menu)
B15. button: to select coee quantity
4.3 Description of the accessories
(page 2 - C )
C1. “Total Hardness Test” indicator paper
C2. Pre-ground coee measure
C3. Descaler
C4. Water softener lter (certain models only)
C5. Cleaning brush
C6. Hot water/steam spout
C7. Hot water/steam spout release button
C8. Power cord
4.4 Description of the milk container
(page 2 - D )
D1. Froth adjustment and CLEAN dial
D2. Milk container lid
D3. Milk container
D4. Milk intake tube
D5. Frothed milk spout (adjustable)
5. BEFORE USE
5.1 Checking the appliance
After removing the packaging, make sure the product is complete and undamaged and that all accessories are present. Do
not use the appliance if it is visibly damaged. Contact De’Longhi
Customer Services.
5.2 Installing the appliance
Important!
When you install the appliance, you should respect the following safety warnings:
• The appliance gives o heat. After positioning the appliance on the worktop, leave a space of at least 3 cm between the surfaces of the appliance and the side and rear
walls and at least 15 cm above the coee maker.
• Water penetrating the coee maker could cause damage.
Do not place the appliance near taps or sinks.
• The appliance could be damaged if the water it contains
freezes. Do not install the appliance in a room where the
temperature could drop below freezing point.
• Arrange the power cord (C8) in such a way that it cannot be
damaged by sharp edges or contact with hot surfaces (e.g.
electric hot plates).
5.3 Connecting the appliance
Important!
Check that the mains power supply voltage corresponds to that
indicated on the rating plate on the bottom of the appliance.
Connect the appliance to an eciently earthed and correctly
installed socket with a minimum current rating of 10A only.
117
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualied
electrician.
5.4 Setting up the appliance
Please note!
• Coee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of coffee in the mill. The machine is, however, guaranteed to be
new.
• You should customise water hardness as soon as possible
following the instructions in section “14. Setting water
hardness”.
1. Insert the power cord (C8) connector into the socket at the
back of the appliance (A19) and connect the appliance to
the mains electricity supply (g. 1). Make sure the main
switch (A20) at the back of the appliance is pressed (g. 2).
2. Remove the water tank (A16- g. 3), open the lid (A18- g.
4), ll to the MAX line with fresh water (g. 5), replace the
lid and put the tank back in the appliance.
You must rst choose the language by moving backwards and
forwards with the < (B4) or > (B8) (g. 9) button, or waiting
until the languages scroll through on the display (B13) at intervals of about 3 seconds:
3. When “English” appears, press and hold the OK button
(B12-g. 10) for a few seconds until “English set” appears
on the display.
Follow the instructions indicated on the appliance display:
4. “INSERT WATER SPOUT”: Check that the hot water spout
(C6) is inserted on the connection nozzle (A8) and place a
container holding a minimum of 100 ml underneath (g.
7).
5. “HOT WATER Press OK” is displayed;
6. Press the OK button to conrm (g. 10). The appliance delivers water from the spout then goes o automatically.
The coee machine is now ready for normal use.
Please note!
• When setting up the appliance, you need to make 4-5 cups
of coee or 4-5 cappuccinos before the appliance starts to
give satisfactory results.
• When making the rst 5-6 cappuccinos, it is normal to hear
the noise of boiling water. After this, the noise becomes
less.
• To enjoy your coee even more and improve the performance of your appliance, we recommend installing a
water softener lter (C4) as described in section “15. Water
softener lter”. If your model is not provided with a lter,
you can request one from De’Longhi Customer Services.
6. TURNING THE APPLIANCE ON
Please note!
Before turning the appliance on, make sure the main switch
(A20) is pressed (g. 2).
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted. The appliance is ready for use only after completion of this cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coee spouts
(A7) and is collected in the drip tray (A12) underneath. Avoid
contact with splashes of water.
• To turn the appliance on, press the button (B1-g.
8). The message “Heating up, Please wait” appears on the
display (B13).
When heating is complete, the message changes to “RINSING”.
As well as heating the boiler, this also heats the internal circuits
by circulating hot water.
The appliance is at temperature when the message indicating
the taste and quantity of coee appears.
7. TURNING THE APPLIANCE OFF
Whenever the coee machine is turned o after being used to
make coee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, a little hot water ows from the coee spouts
(A7). Avoid contact with splashes of water.
• To turn the appliance o, press the button (B1- g.
8).
• The message “Turning o Please wait” appears on the
display (B13), then, if necessary, the appliance performs a
rinse cycle and goes o (standby).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
• rst turn the appliance o by pressing the button;
• release the main switch (A20) at the back of the appliance
(g. 2).
Important!
Never press the main switch while the appliance is on.
8. MENU SETTINGS
8.1 Rinsing
Use this function to deliver hot water from the coee spout (A7)
and from the hot water/steam spout (C6), if inserted, to clean
and heat the appliance’s internal circuit.
Place a container with a minimum capacity of 100 ml under the
hot water/steam spout (g. 7).
118
To enable the function, proceed as follows:
1. Press the MENU/ESC button (B14) to enter the menu;
2. Press < (B4) or > (B8) (g. 9) until “Rinsing” appears on
the display (B13);
3. Press the OK button (B12-g. 10): the message “Conrm?”
is displayed;
Danger of burns!
Do not leave the appliance unattended while hot water is being
delivered.
4. Press the OK button. “RINSING Please wait” is displayed;
5. After a few seconds, hot water is delivered rst from the
coee spouts, then from the hot water/steam spout (if inserted) to heat the appliance’s internal circuit. “RINSING” is
displayed, together with a progress bar which lls gradually as preparation proceeds;
6. To stop the process press any button or wait for delivery of
water to stop automatically.
Please note!
• If the appliance is not used for more than 3-4 days, when
switched on again, we strongly recommend performing
2/3 rinses before use;
• After cleaning, it is normal for the grounds container (A10)
to contain water.
8.2 Descaling
For instructions on descaling, see section “13. Descaling”.
8.3 Install lter
For instructions on how to install the lter, see section “15.
Water softener lter”.
8.4 Replacing the water softener lter (if
installed)
For instructions on how to replace the lter, see section “15.2
Replacing the lter”.
8.5 Adjust time
To adjust the time on the display (B13), proceed as follows:
1. Press the MENU/ESC button (B14) to enter the menu;
2. Press < (B4) or > (B8) (g. 9) until “Adjust time” is
displayed;
3. Press the OK button (B12-g. 10): the hours ash on the
display;
4. Press < or > to change the hour;
5. Press the OK button to conrm. The minutes ash;
6. Press < or > to change the minutes;
7. Press the OK button to conrm.
The time is set. Press the MENU/ESC button to exit the menu.
8.6 Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coee immediately.
Please note!
To enable this function, the time must already be set correctly.
To enable auto-start, proceed as follows:
1. Press the MENU/ESC button (B14) to enter the menu;
2. Press < (B4) or > (B8) (g. 9) until “Auto-start” appears on
the display (B13);
3. Press the OK button (B12- g. 10). “Enable?” is displayed;
4. Press the OK button to conrm;
5. Press < or > to choose the hour;
6. Press the OK button to conrm;
7. Press < or > to change the minutes;
8. Press the OK button to conrm;
9. Press the MENU/ESC button to exit the menu.
Once the time has been conrmed, activation of auto-start is
indicated by the symbol displayed alongside the time.
To disable the function:
1. Select auto-start from the menu;
2. Press the OK button. “Disable?” is displayed;
3. Press the OK button to conrm.
The symbol is no longer displayed.
8.7 Auto-o (standby)
Auto-o can be set so that the appliance goes o after 15 or 30
minutes, or 1, 2 or 3 hours.
To programme Auto-o, proceed as follows:
1. Press the MENU/ESC button (B14) to enter the menu;
2. Press < (B4) or > (B8) (g. 9) until “Auto-start” appears on
the display (B13);
3. Press the OK button (B12- g. 10);
4. Press < or > until the required operating time (15 or 30
minutes, or 1, 2 or 3 hours) is displayed;
5. Press the OK button to conrm;
6. Press the MENU/ESC button to exit the menu.
Auto-o is now programmed.
8.8 Cup warmer
This function enables the cup warmer to be enabled or disabled.
Proceed as follows:
1. Press the MENU/ESC button (B14) to enter the menu;
2. Press < (B4) or > (B8) (g. 9) until “Cup warmer” appears
on the display (B13);
3. Press the OK button (B12- g. 10). “Enable?” or “Disable?”
is displayed;
119
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.