|
|
|
|
Project __________________________________ |
|
|
|
|
Item ____________________________________ |
|
|
|
|
Quantity ________________________________ |
Speciication Line® |
CSI Section 11400 |
|||
Date ____________________________________ |
||||
|
|
|
|
Approved _______________________________ |
Self-Contained Solid Door Roll-In Freezer |
|
|||
|
||||
|
|
|
|
|
Models |
|
|
|
|
One section |
Two section |
Three section |
|
|
SSFRI1-S |
SSFRI2-S |
SSFRI3-S |
Stainless exterior and interior full door |
|
SAFRI1-S |
SAFRI2-S |
SAFRI3-S |
Stainless exterior and aluminum interior full door |
|
SMFRI1-S |
SMFRI2-S |
SMFRI3-S |
Stainless front aluminum exterior and interior full door |
|
Standard Features
|
• Stainless steel interior and exterior (SS) |
|
• Stainless steel exterior, aluminum interior |
|
(SA) |
|
• Aluminum interior and exterior, stainless |
|
front (SM) |
|
• Built in door locks with heavy duty strikes |
|
• Recessed metal door handle |
|
• Pressure relief valve is standard to prevent |
|
door vapor lock |
|
• Exterior digital thermometer with high/ |
|
low temperature alarm |
|
• Easy to use electronic control |
|
• Easy access “lip up” shroud |
|
• Tough ABS interior door liners |
|
• 10’ attached cord and plug on 115V units |
|
• Stainless steel breaker strips |
|
• High density foamed in place |
|
environmentally friendly, Kyoto Protocol |
|
Compliant, Non ODP (Ozone Depletion |
|
Potential), Non GWP (Global Warming |
|
Potential) polyurethane keeps energy |
|
costs low |
SSFRI2-S |
• Energy savings door heater switch |
|
• Two year parts & labor warranty |
|
• Five year compressor warranty |
|
Options &
Accessories
•Security (prison) package
•Door ield rehingability
•Stainless steel interior door liner
•Stainless steel back
•Laminate on front, sides and back
•Bottom mount electrical
•Stainless steel banking strip
•Heat shield end
•230-50-1 electrical
•220-60-1 electrical
Specifications
Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed loor. Mounted to the interior ceiling, the interior incandescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.
Each section can accommodate a 28 1/2” x 27 1/4” x 72” cart.
Doors: Exterior shall be corrosion resistant stainless steel. Interior liner shall be resilient high impact ABS material formed to protrude beyond the door gasket to protect the gasket from tearing. Each door has two edge mount, self closing, cam lift style hinges. Doors can be removed from the cabinet without the use of tools. Metal door handle shall be recessed into the door for easy grip without impacting aisle space. Keyed door lock is mounted in the door next
to the handle. Lock engages into a heavy duty strike mounted to the cabinet face. Door gaskets are magnetic and mount to the door snapping in place and are removable without tools.
Refrigeration system: All components are mounted to the exterior of the cabinet ceiling, outside the food zone and are assembled
as one piece and can be removed as one piece. Environmentally friendly R404A refrigerant is used. The system has the capability of maintaining between -5ºF and 0ºF in heavy use food service operations. Refrigerant is metered using a highly responsive thermostatic expansion valve. System is controlled using Delield’s ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reduces compressor
cycling and longer compressor life with lower energy consumption.
Control system uses adaptive defrost to assure evaporator coil is free of ice and is operating at optimum eiciency. Evaporator condensate is eliminated using an energy eicient hot gas system.
Electrical: Standard electrical on one section units shall be 115V, 60 Hz single phase. A 10’ cord and plug is supplied and attached to a junction box mounted on the exterior top of the cabinet. Two and three section units shall be 115/208-230 and will require hardwire connections.
980 S. Isabella Rd. |
Phone: 800-733-8948 or 989-773-7981 |
|
|
Mt. Pleasant, Michigan 48858 |
www.delfield.com |
||
Fax: 800-669-0619 |
|||
|
|
||
|
|
|
<![endif]>Freezer In-Roll Door Solid Line®: Speciication