DAEWOO DWF-5590DP, DWF-5590D Service Manual

DAEWOO ELECTRONICS CO., LTD.

612-1, AHYEON-DONG, MAPO-GU, SEOUL, KOREA.

C.P.O. BOX 8003 SEOUL KOREA TELEX: DWELEC K28177-8 CABLE:"DAEWOOELEC"

FAX: [phone] TEL: [phone]

S/M NO.: WF55900200

PRINTED DATE: NOV. 1995

Service Manual

Programmable Washing Machine

DWF-5590DP

DWF-5590D

Series

DAEWOO ELECTRONICS CO., LTD.

TABLE OF CONTENTS

1. SPECIFICATIONS.....................................................................................................................................................................	2
2. FEATURE AND TECHNICAL EXPLANATION .......................................................................................................................	3
FEATURE OF THE WASHING MACHINE................................................................................................................................	3
WATER CURRENTS TO ADJUST THE UNBALANCED LOAD...............................................................................................	3
FUNCTION FOR SOAK WASH .................................................................................................................................................	3
AUTOMATIC WATER SUPPLY SYSTEM FOR BLANKET WASH ..........................................................................................	3
PULSATOR SYSTEM.................................................................................................................................................................	4
AUTOMATIC DRAINING TIME ADJUSTMENT ........................................................................................................................	4
SOFTENER DISPENSER ...........................................................................................................................................................	5
AUTOMATIC UNBALANCE ADJUSTMENT .............................................................................................................................	6
CIRCULATING-WATER COURSE AND LINT FILTER .............................................................................................................	6
RESIDUAL TIME DISPLAY ........................................................................................................................................................	7
DRAIN MOTOR ..........................................................................................................................................................................	7
GEAR MACHANISM ASS'Y ......................................................................................................................................................	8
PRINCIPLE OF BUBBLE GENERATOR....................................................................................................................................	8
FUNCTIONAL PRINCIPLE OF BUBBLE WASHING MACHINE..............................................................................................	9
3. STRUCTURE OF THE WASHING MACHINE ......................................................................................................................	10
4. FUNCTION OF THE CONTROL PANEL...............................................................................................................................	11
5. DIRECTIONS FOR INSTALLATION AND USE....................................................................................................................	13
HOW TO INSTALL THE WASHING MACHINE ......................................................................................................................	13
HOW TO CONNECT THE INLET HOSE .................................................................................................................................	14
HOW TO INSTALL THE DRAIN HOSE (FOR DWF-5590D SERIES, NON-PUMP) ..............................................................	15
HOW TO INSTALL THE DRAIN HOSE (FOR DWF-5590DP SERIES, PUMP)......................................................................	16
HOW TO CLEAN DRAIN FILTER (DWF-5590DP SERIES, PUMP ONLY) ............................................................................	17
6. PROCEDURE OF FULL-AUTOMATIC WASHING..............................................................................................................	18
7. DIRECTIONS FOR DISASSEMBLY AND ADJUSTMENT..................................................................................................	20
GEAR MACHANISM ................................................................................................................................................................	20
DRAIN MOTOR ........................................................................................................................................................................	21
BRAKE ADJUSTMENT ............................................................................................................................................................	21
8. TROUBLE SHOOTING GUIDE ..............................................................................................................................................	22
CONCERNING WATER SUPPLY............................................................................................................................................	22
CONCERNING WASHING.......................................................................................................................................................	23
CONCERNING DRAINING ......................................................................................................................................................	24
CONCERNING SPINNING ......................................................................................................................................................	25
CONCERNING OPERATION...................................................................................................................................................	26
9. PRESENTATION OF THE P.C.B. ASS'Y ..............................................................................................................................	27
CONCERNING ERROR MESSAGE ........................................................................................................................................	27
CONVENIENT TEST FUNCTION.............................................................................................................................................	28
MINUTE EXPLANATION DIAGRAM FOR EACH PARTS.......................................................................................................	29
APPENDIX ...................................................................................................................................................................................	43
WIRING DIAGRAM (FOR DWF-5590DP SERIES)..................................................................................................................	43
WIRING DIAGRAM (FOR DWF-5590D SERIES) ....................................................................................................................	44
PARTS LIST (FOR DWF-5590DP SERIES) .............................................................................................................................	45
PARTS DIAGRAM (FOR DWF-5590DP SERIES) ...................................................................................................................	48
PARTS LIST (FOR DWF-5590D SERIES) ...............................................................................................................................	51
PARTS DIAGRAM (FOR DWF-5590D SERIES)......................................................................................................................	54
P.C.B. PARTS LIST ..................................................................................................................................................................	57
CIRCUIT DIAGRAM .................................................................................................................................................................	62
BARE PCB (TOP) .....................................................................................................................................................................	63
BARE PCB (BOTTOM).............................................................................................................................................................	64

1

1. SPECIFICATIONS

SPECIFICATIONS

	NO	ITEM	SPECIFICATIONS
	1	POWER SOURCE	AC 220~240V/50Hz		AC 110~127V/60Hz
	2	POWER CONSUMPTION	INPUT: 380W, OUTPUT: 210W
	3	MACHINE WEIGHT	38kg (GROSS WEIGHT: 43kg)
	4	DIMENSION (WxHxD)	550x885x550 mm
	5	WASHING COURSE	FULL AUTOMATIC 8 OF COURSES (SOAK, SPEED,
			BLANKET, FUZZY, DRY, SILK, STRONG, NIGHT)
	6	WATER CONSUMPTION	NORMAL 146L
	7	WATER LEVEL SELECTOR	HIGH(52L), MID(44L), LOW(36L), E.LOW(28L)
	8	OPERATING WATER PRESSURE	0.3~8kg/cm2 (2.9N/cm2~78.4N/cm2)
	9	REVOLUTION PER MINUTE	SPIN: 775R.P.M., WASH: 145R.P.M. (FOR 60Hz)
	10	PULSATOR	6 WINGS (ø 350mm)
	11	WATER LEVEL CONTROL	ELECTRICAL SENSOR
	12	OUTER CABINET	PCM(PRE-COATED METAL SHEET)
	13	ANTI-NOISE PLATE	§
	14	GEAR MACHANISM ASS'Y	HELICAL GEAR FOR LOW NOISE
	15	LINT FILTER	§
	16	SOFTENER INLET	§
	17	FUNCTION FOR SOAK WASH	§
	18	ALARM SIGNAL	§
	19	RESIDUAL TIME DISPLAY	§
	20	AUTO. WATER SUPPLY	§
	21	NEW WATER FLOW	WATER FLOW TO ADJUST THE UNBALANCED LOAD
	22	TRANSPARENT WINDOW	§
	23	FUNCTION FOR BUBBLE	§
	24	MAXIMUM MASS OF TEXTILE	5.5kg

2

2. FEATURE AND TECHNICAL EXPLANATION

FEATURE AND TECHNICAL EXPLANATION

FEATURE OF THE WASHING MACHINE

1)The first air bubble washing system in the world.

2)Quiet washing through the innovational low-noise design.

3)The wash effectiveness in much more enhanced because of the air bubble washing system.

4)The laundry detergent dissolves well in water because of the air bubble washing system.

5)The adoption of the water currents to adjust the unbalanced load.

6)One-touch operation system.

WATER CURRENT TO ADJUST THE UNBALANCED LOAD

It is a function to prevent eccentricity of the clothes after wash by rotating pulsator C.W and C.C.W for 20 seconds. (But, the DRY & SILK course have no operation of the water currents to adjust the unbalanced load.)

EFFECT

It reduces vibration and noise effectively while spinning.

WATER FLOW

WASH

I

DRAIN

SPIN

FILL

RINSE 1

I

DRAIN

SPIN

FILL

RINSE 2

I

DRAIN

...

MOTOR C.W

SIGNAL C.C.W

TIME (SEC.)

0.3

0.5

0.3

0.5

0.3

0.5

20 SEC. (About 13 Times)

FUNCTION FOR SOAK WASH

DISPLAY THE RESIDUAL TIME

When the SOAK WASH is selected, the total wash time increases because 30 minutes for soak process are added to the time of main process.

PROGRESS

SOAK PROCESS MAIN PROCESS

FILL

WASH

STOP

WASH

STOP

WASH

STOP

•

2'

I

8'

2'

I

8'

2'

I

8'

30 Minutes

NOTE: ‘ I ’ mark indicates the operation of the water currents to adjust the unbalanced load.

AUTOMATIC WATER SUPPLY SYSTEM FOR BLANKET WASH

The water level would be lowered because the blanket absorbs water at the beginning of washing. Therefore, after 30 seconds, the operation is interrupted to check the water level, and then the water is supplied again until the selected water level is reached.

3

Residual drain time.

The time remembered by micom.

PULSATOR SYSTEM

When the new shaped pulsator is rotated C.W C.C.W at a high speed, it makes the 'heart-shaped' water currents as shown below.

C

Rotate

B

A A

WATER CURRENTS

AWater is pushed up near the tub wall by rotation on the pulsator.

BWater is pulled down in the middle of the tub by rotation of the pulsator

CWater currents is generated by rotation of the pulsator.

AUTOMATIC DRAINING TIME ADJUSTMENT

This system adjusts the draining time automatically according to the draining condition.

		Good draining	The washer begins spin process after drainage.
	Draining
		Bad draining	Draining time is prolonged.
	condition
		No draining	Program is stopped and gives the alarm.

FUNCTIONAL PRINCIPLE

1) The micom can remember the time from the beginning of drain to reset point when the pressure switch reaches to "OFF" point.

Drain Time	Movement of the program
Less than 4 minutes	Continue draining.
More than 4 minutes	Program stops and gives the alarm with the	blinked on display lamp.

2) In case of continuous draining, residual drain time is determined by micom. Draining time as a whole=D + 60

(T sec.)

D							(mm)	W
				TRIP POINTS		*	345
R								A
A					*		290	T
I								E
N						D4	235	R
I				*				L
N	T4			D3
G			*	D2			180	E
	T3	D1
	T2							V
T		T1	*	*	*	*	60	E
I		60		RESET POINTS				L
M							0
E			E. LOW	LOW	MED	HIGH

T1=D1+60 (Sec.) T2=D2+60 (Sec.) T3=D3+60 (Sec.) T4=D4+60 (Sec.)

4

SOFTENER DISPENSER

This is the device to dispense the softener automatically by centrifugal force.

This is installed inside the auto-balancer.

FUNCTIONAL PRINCIPLE

1)Softener stays in room (A) when poured into softener inlet.

2)Softener moves from (A) to (B) by centrifugal force during intermittent spin process.

3)Softener flows from (B) to (C) during rinse process next to intermittent spin.

4)Softener moves from (C) to (D) by centrifugal force during second intermittent spin. After spin process is finished, the softener is added into the tub through softener outlet.

FLOW OF THE SOFTENER

Wash

Intermittent

Hold

Intermittent

Rinse

Spin

Spin

Spin

Normal

Centrifugal

Flow in

Centrifugal

Flow in

force

force

Course

(A)

(B)

(C)

(D)

FLOW OF THE SOFTENER INSIDE OF THE BALANCER

Room inside

A

B

C

D

the balancer

Centrifugal force Flowing by weight

NOTE: Softener moves into the next room when r.p.m. of the tub is more than 100 r.p.m.

HOW TO CHECK MOVEMENT

Pour a reasonable amount of "MILK" into softener dispenser and operate the washer with no load. In final rinse cycle, make sure that the milk is added into the tub through softener outlet.

Balancer

Softener

B outlet

D

A C

Softener inlet

5

AUTOMATIC UNBALANCE ADJUSTMENT

This system is to prevent abnormal vibration during intermittent spin and spin process.

FUNCTIONAL PRINCIPLE

1)When the lid is closed, the safety switch contact is "ON" position.

2)In case that wash loads get uneven during spin, the outer tub hits the safety switch due to the serious vibration, and the spin process is interrupted.

3)In case that P.C.B. ASS'Y gets "OFF" signal from the safety switch, spin process are stopped and rinse process is started automatically by P.C.B. ASS'Y.

4)If the safety switch is operated due to the unbalance of the tub, the program is stopped and the alarm is given.

Contact of safety switch Lid closing

Lid opening

	Contact lever A
Position of
unbalanced
load(OFF)	Normal(ON)

NOTE:

The alarm finished when you close the lid after opening it. Check the unbalance of the wash load and the installation condition.

CIRCULATING-WATER COURSE AND LINT FILTER

CIRCULATING-WATER

The washing and rinsing effects have been improved by adopting the water system in which water in the tub is circulated in a designed pattern.

When the pulsator rotates during the washing or rinsing process, the water below the pulsator vanes creates a water currents as shown in figure.

The water is then discharged from the upper part of the tub through the water channel.

About 40L/min. water is circulated at the 'high' water level, standard wash load and standard water currents.

Tub

Filter

Outer tub

Water

channel

Pulsator

6

LINT FILTER

Much lint may be obtained according to the kind of clothes to be washed and some of the lint may also sticks to the clothes.

To minimize this possibility a lint filter is provided on the upper part of the tub to filter the wash water as it is discharged from the water channel. It is good to use the lint filter during washing.

Bleach inlet

Filter

Pulsator

HOW TO CLEAN THE LINT FILTER

1)Pull the filter frame upward.

2)Turn the lint filter inside out, and wash the lint off with water.

3)Return the filter as it was, and fix the filter frame to the slot.

RESIDUAL TIME DISPLAY

When the START/HOLD button is pressed, the residual time (min.) is displayed on the time indicator, and it will be counted down according to the process.

When operation is finished, the TIME INDICATOR will light up .

DRAIN MOTOR

STRUCTURE

Pull

Loosen

Pulley

Lever

Inductive ring

Magnet

Coil of motor

Magnet of motor

FUNCTIONAL PRINCIPLE

1)When the DRAIN MOTOR connected to the power source (AC 220V), the DRAIN MOTOR rotates with 900 r.p.m and revolves the pulley by gear assembly for reducing.

2)When the pulley is rotated, the pulley winds the wire to open the drain valve.

3)Therefore, rotation of pulley is changed to the linear moving of wire.

4)The wire pulls the brake lever of Gear Mechanism Ass'y within 5 seconds.

5)After the wire pulled, gear assembly is separated from motor and condition of pulling is held by operation of the lever.

6)When the power is turned off, the drain valve is closed because the wire returns to original position.

7

GEAR MECHANISM ASS'Y

The proper water currents is made by the rotation of pulsator at a low speed (about 145 r.p.m) to prevent the damage to the small sized clothes.

Pulsator shaft

	Spinner shaft
Inner clutch spring
	Planetary gear
Brake lever	Clutch spring
	Clutch boss
	Spinner pulley

Sun gear

Planetary gear

Internal gear

Pulsator

Planetary
Motor	1 revolution

5.2 revolutions

Spinner

pulley

V-belt

PRINCIPLE OF BUBBLE GENERATOR

STRUCTURE

	Motor
	1490 r.p.m.
	60(Hz)
	V.belt	Pulsator
	Planetary
	Gear
	Spinner Pulley	145 r.p.m.
	1/5.2
	775 r.p.m.	Tub
	Directly	775 r.p.m.

Bobbin & coil	Armature
Magnet	Bellows
Trans core

Air out hole

Air

Air

			Protector A
	Air in hole
			Protector B

8

PRINCIPLE OF INTAKE & OUTLET OF THE AIR

INTAKE : ARMATURE moves up, and BELLOWS inhales the air. At the same time, protector B is open and A is close. OUTLET: ARMATURE moves down, and BELLOWS exhausts the air. At the same time, protector B is close and A is

open.

FUNCTIONAL PRINCIPLE OF TRANS & MAGNET

•The phase of A.C electric power changes to 60 cycle/second.

•The magnetic pole of trans core is changed by the change of the phase of A.C electric power.

•The core repeats push and pull (3600 times/min.) of the armature magnet.

A.C

A.C

N

Pan spring

N

NS

NS

Trans core

S

Magnet

S

FUNCTIONAL PRINCIPLE OF BUBBLE WASHING MACHINE

CROSS SECTION

Air bubble

Tub

Outer tub

Pulsator

Nozzle

FUNCTIONAL PRINCIPLE

Bubble generator supplies the air from the bottom of outer tub to the inner space of pulsator, the air is dispersed by the rotation of pulsator. Air-bubble is created by the centrifugal force, and rises up.

9

3. STRUCTURE OF THE WASHING MACHINE

STRUCTURE OF THE WASHING MACHINE

• HOT WATER TAP

• COLD WATER TAP

After using the washer, close the water tap and turn off the power.

• SOFTENER INLET

Pour softener into the softener inlet just before wash and it will be added into the tub automatically just before the final rinse.

•BLEACH INLET

•CONTROL PANEL

•SCREW COVER

•TUB

After using the washer, close the water tap and turn off the power.

• GUIDE

DRAIN HOSE

• POWER SWITCH

• HOOK HOLE

• LINT FILTER

• DRAIN HOSE

• HANDLE

• POWER CORD

•ADJUSTABLE LEGS

ACCESSORIES

Inlet Hose	Water Tap	Drain Hose	Hose Fixture	Drain Hose	Guide Drain Hose
(2 Pcs)	Adapter (2 Pcs)	Clamp

In case of screw-shaped

inlet hoses, water tap adapters will not be provided.

10

4. FUNCTION OF THE CONTROL PANEL

FUNCTION OF THE CONTROL PANEL

CONTROL PANEL

It has micom sensor.

As the buttons are pressed, the lamps indicating

the selection of you desired washing program will light up.

	Power Switch				Cancel Button
	• Press this switch to turn the				• With this button, you can arbitrarily
					choose course by proper
	power ON or OFF.
					combination with the right three
	• After turning off the power,				buttons.
					• If you want the washer to operate
	wait for more than 3
					differently from presetting time or to
	seconds and then turn it on
			POWER		operate separately among the three
	again.
					stages, you first push this button
					and other buttons sequentially.

DAEWOO AUTOMATIC

WASHER

AERO FUZZY & AIR POWER

DRY CLEANING EFFECT

CANCEL WASH

Display

•The “TIME” part lamp indicates the residual time and the number of rinsing and spinning times until wash is over.

•The “COURSE”, “TEMP”, and “LEVEL” part lamps are turned on according to the buttons of the control panel.

TIME			COURSE			TEMP.LEVEL
SOAK WASH RINS	SPIN FUZ.		DRY	SILK	SOAK	HOT H.
			D			WARM	M.
MIN. TIME	MIN.	SPEE	STRO	NIGHT	BLAN		L.
				*		COLD
			D				S.
				*

RINSE	SPIN		COURSE WASH		TEMP

Start/Hold Button

•Press this button to begin operation or to stop operation temporarily.

•Operation and temporary stop are repeated as it is pressed.

START/HOLD

WATER LEVEL

Wash Selector

•The above three buttons can be used to bring the three washing stages under control.

Course Selection Button

•This button is used to select the washing course according to the type of the clothes being washed.

•You can choose one of the eight courses by pressing this button until your desired course indicator light comes on.

Temperature Selection Button

•This button is used to select the water temperature according to the clothes being washed.

•Press this button until your desired temperature indicator light comes on, and it will repeat following signs:

COLD ¤A WARM ¤A HOT

Water Level Selector

•This selector is used to select the washing water level according to the size of the wash load.

11

5. DIRECTION FOR INSTALLATION AND USE

DIRECTION FOR INSTALLATION AND USE

TO INSTALL THE WASHING MACHINE

SELECTION OF THE INSTALLING PLACE

Install the washer on a horizontal solid floor.

If the washer is installed on an unsuitable floor, it could make considerable noise and vibration.

Never install in these places

•The place where it would be exposed to direct sunlight.

•The place nearby a heater or heat appliance.

•The place where it would be supposed to be frozen in winter.

•The kitchen with coal gas and a damp place like a bathroom.

•The proper installation of the washing machine can increase the wash effectiveness and the life of it.

INSTALLATION OF THE UNDER BASE COVER

After installing the washing machine, close the under-base cover.

!The packing box opened, there is a under-base cover at the bottom of the back.

@Push the under-base cover into the end, which decreases the noise made by this washer.

HOW TO INSTALL ON AN INCLINED PLACE

If the washer is installed on an unsuitable floor, it could make considerable noise and vibration, and could cause a malfunction.

Use the height adjust rubber to adjust the washing machine so that it sits properly.

	!Height Setting			@Check the Horizontal Status
	• After controlling the height by			• Check the position of tub above
	turning the adjustable legs, let the			the center of the washer.
	washer put down to the ground.

NOTES:

The opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.

13

HOW TO CONNECT THE INLET HOSE

IN INSTALLING THE INLET HOSE

Be careful not to mistake in supplying hot and cold water.

In using only one water tap, connect the inlet hose to the cold water inlet.

	Hot	Cold
	Water
		Water

!Pull down the collar of the inlet hose to separate it from the water tap adapter.

		Water Tap
		Adapter
	Collar	Rubber
		packing

Connector C

@Loosen the four screw at the water tap adapter, but don't loosen the screws until they are separated from the water tap adapter.

Tape

Connector A

Tap

Adapter

Connector B

#Connect the water tap adapter to the water tap, and tighten the four screws evenly while pushing up the adapter so that the rubber packing can stick to the water tap tightly.

@

!

Connector B

$Remove the tape, and screw connector B into connector A tightly.

%Connect the inlet hose to the water tap adapter by pulling down the collar of the hose end.

Collar

^Connect the connector C of the inlet hose to the water inlet of the washer by turning it clock-wise to be fixed tightly.

•Please check the rubber packing inside the connector C of the inlet hose.

• FOR SCREW-SHAPED TAP

!Connect the inlet hose to the water tap by screwing the connector D tightly.

Connector D

Hose

Rubber

Packing

Connector C

@Connect the connector C of the inlet hose to the water inlet of the washer by turning it clockwise to be fixed tightly.

•Please check the rubber packing inside the connector C of the inlet hose.

14

HOW TO USE THE DRAIN HOSE (FOR DWF-5590D SERIES)

NOTE IN USING THE DRAIN HOSE

!In case that it goes over a doorsill.

Don't let the height of the drain hose exceed 20cm from the ground.

@Inhose.case of extending the drain Don't let the total length exceed 3m.

#Be careful that the end of the drain hose is not immersed in water.

3m

20cm

15

HOW TO INSTALL THE DRAIN HOSE (FOR DWF-5590DP SERIES)

NOTE IN USING THE DRAIN HOSE

Never forget to install drain hose before operating this washing machine.

There are a drain hose, a hose clamp, a hose fixture and a hose guide in the washing machine.

!Connect the drain hose to the	@Insert the hose fixture into hook
drain outlet at the back side of	hole at the side of the body,
the washing machine, and	and fix the drain hose by
fasten it tightly with the clamp	inserting it into the hose fixture.
supplied.

Drain Output

Hook Hole

Drain hose

Hose Fixture

Drain Hose

Hose Clamp

	$Hook the drain hose to the	Or, connect the drain hose to a
		standpipe of a diameter greater than
	edge of the tub, paying
	attention that there are no	that of the drain hose and at a height
	bends or constractions along	of min. 70cm.
	the drain hose.

70cm min

#Attach the hose guide, included in the accessory kit, to guide the drain hose over the tub or standpipe.

Pull Hose through

Flex. Hose	55 mox
Guide
apart

%Position the washing machine next to the wall.

MUST be ventilated

NOTES:

1.Keep the drain hose fixed tightly in the hose fixture, or let the highest point of the drain hose be more than 1m above the floor.

If not so, the water in the washer could be drained during operation

2.Be sure that the height of the drain hose must be less than 1.5m above the floor. If not so, the water in the washer could not drain.

3.The hose guide MUST be fitted to the drain hose. The drain hose sould not extend more than 55mm from the end of the hose guide. This is to prevent ‘SYPHONING’.

If necessary the drain hose can be trimmed to length.

16

HOW TO CLEAN DRAIN FILTER (FOR DWF-5590DP SERIES)

In this washer machine, the drain filter is equipped at the back side of it.

This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc..

And this should be cleaned frequently (every 5 times of use) for its smooth operation.

Drain problem could be caused if the drain filter is not cleaned at proper time.

Please keep it clean.

In case you clean the drain filter, please follow the instructions as below.

!Remove the	@ Unscrew the cap.	#Release the filter
remained water		assembly
• Put down the remained water in	• Turn the cap counter clockwise.	• Pull out the filter assembly off the
the hose. And put a container		case of the main body.
under the filter to collect water.
		FILTER	SLIT
	CAP		CASE
		CAP
FILTER CONTAINER

$Remove the	%Put the filter	^ Lock the cap.
foreign stuffs	assembly back
• Clean the drain filter removing the	• Put in the filter along the guiding	• Turn the cap clockwide tightly.
foreign stuffs.	prominence of the case. Please
	note the right position of the filter
	adjusting the groove to the guide
	rib.
FILTER
	CASE
	FILTER
CAP	GUIDE
	RIB
	CAP	CAP
	SLIT

NOTES: During the operation, the "OE" signal means drain error can be displayed on the control panel. In this case, the main cause of that problem is the blocking of the drain filter.

If you clean the drain filter following above instructions, you could continue the normal operation of the washing machine to reset the program, please turn the power off and on again.

17

6. PROCEDURE OF FULL-AUTOMATIC WASHING

PROCEDURE OF FULL-AUTOMATIC WASHING

Prepare for washing.

¡Ø

Pressing the power switch

¡Ø

Put the clothes into the tub.

¡Ø

Select the washing course.

¤ Full-Automatic

¤ŁSelect the Course

¤ØProcedure of

Pressing the Button

BLANKET

This selection is effective

BLANKET

START/HOLD

for blanket, curtain,

SOAK

WASH

RINS

SPIN

carpet, etc..

* 3 kg’s limitation

MIN.

TIME

MIN.

for one-time-wash.

COURSE

FUZZY

START/HOLD

This selection is for

FUZZY

(SENSOR)

general washing.

DRY

This selection is effective

DRY

for delicate clothes.

Put the exclusive

SOAK

WASH

RINS

SPIN

* Just follow the washing

detergent, dryten of

procedure.

26g into the tub for

* 1.5kg’s limitation

dilution with water.

MIN.

TIME

MIN.

for one-time-wash.

COURSE

SILK

This selection is effective for

SILK

some clothes made of silk.

Put the exclusive

SOAK

WASH

RINS

SPIN

* Do not put in the wash marked

detergent, dryten of

with ‘dry-cleaning’.

26g into the tub for

* 1kg’s limitation for one-time-

dilution with water.

MIN.

TIME

MIN.

wash.

COURSE

STRONG

STRONG

START/HOLD

The selection is effective

SOAK

WASH

RINS

SPIN

for blue-jean, climbing

clothes, ruck-sack, sports

MIN.

TIME

MIN.

wear, etc..

COURSE

NIGHT

NIGHT

START/HOLD

This selection is for a

SOAK

WASH

RINS

SPIN

night-washing housewife

who has no opportunity at

day time.

MIN.

TIME

MIN.

COURSE

SOAK

This course is used to

SOAK

START/HOLD

increase the wash effect by

SOAK WASH

RINS

SPIN

keeping the clothes soaked

sufficiently in the wash

MIN.

TIME

MIN.

water.

COURSE

SPEED

SPEED

START/HOLD

This selection is effective

SOAK

WASH

RINS

SPIN

for washing light or less

MIN.

TIME

MIN.

dirty wash.

COURSE

*As far as putting the power plug out, the selections for hot and cold water are remembered after washing. At next washing time, the remembered lamp will light on.

18

¤ŒProcedure of Washing (Washing machine does it automatically.)

	Water inlet and	SPIN	RINSE	SPIN		RINSE	SPIN
	wash for 14 minutes.
	A Blanket course’s water flow is			R	R	L	L	R	L
	Water inlet and	SPIN	RINSE	SPIN		RINSE	SPIN
	wash for 14 minutes.
	Artificial brain computer controls full procedure proper to wash load
	automatically.
Buzzer signal to	START/HOLD
notify you can put		Water inlet and		SPIN		RINSE	SPIN		RINSE	SPIN
the sensible		wash for 6 minutes.
clothes into the
diluted water with		A part of dotted line is decreasing rotation velocity.
Dryten.		Because protect clothes from damage.
Buzzer signal to	START/HOLD
notify you can put		Water inlet and		SPIN		RINSE	SPIN		RINSE	SPIN
the sensible		wash for 4 minutes.
clothes into the
diluted water with		A part of dotted line is decreashing rotation velocity.
Dryten.		Because protect clothes from damage.
	Water inlet and	SPIN	RINSE	SPIN		RINSE	SPIN
	wash for 14 minutes.
A strong course’s water flow is R			L	R	L	R L	R	L	R	L

	Water inlet and	RINSE	RINSE	RINSE	SPIN
	wash for 30 minutes.

	Water inlet and	RINSE	RINSE	SPIN
	wash for 44 minutes.

	Water inlet and	SPIN	RINSE	SPIN
	wash for 10 minutes.

After Washing: • Close the water tap and separate it from the inlet-hose.

If not so, the autovalve is out of order by the water pressure.

• Take off plug.

End of washing informed by buzzer.

After 10 minutes later from the end of the washing the power switch is turned off

automatically.

19