Daewoo ERF-370A Manual

0 (0)
Daewoo ERF-370A Manual

CE

This product has been designed, constructed and marketed in accordance with EEC directives 73/23, 89/336 and 93/68. Please read this manual carefully to ensure maximum satisfaction from your appliance. Keep the manual in a safe place for future reference. For drawings referenced in the text below, see flap at the back of the manual.

ABOUT THIS PRODUCT

This product is designed for domestic household use only.

Use the 4-star freezer compartment

-to freeze fresh and cooked foods,

-to store deep-frozen and frozen products,

-to make ice-cubes.

Use the refrigerator compartment

-to store fresh foods,

-to cool drinks.

The freezer and refrigerator compartments defrost automatically.

Owing to cool air circulation (multi-airflow system) an even temperature is maintained on every shelf of the refrigerator compartment. The temperature in the specially designed low temperature compartment is kept at approximately 0°C, extending nutritional value and original freshness of the food.

The electronic control panel enables you to control the refrigerator compartment without opening the door.

“Super Freezing” function: instant cooling with powerful supply of cold air.

“Vac (vacation) Freezing” function: energy saving, e.g. when you are away from home for a longer period.

Shelves can be easily moved from top to bottom without fully opening the door.

BEFORE CONNECTING TO THE MAINS

1.Wait 2 hours after delivery before you connect the appliance to the power supply, in order to ensure trouble-free operation.

2.In the UK only. Electrical connections:

-Check that the voltage on the rating plate (7) corresponds to the voltage in your home.

-The wires of the mains lead fitted to this appliance are

coloured in accordance with the following code:

GREEN and YELLOW = EARTH (GREEN or GREEN and YELLOW)

BLUE = NEUTRAL (BLACK)

BROWN = LIVE (RED)

As the colours of the wires in the mains lead fitted to this appliance may not correspond with the coloured markings identifying the terminals in the plug, proceed as follows:

-The wire which is coloured GREEN and YELLOW must be connected to the terminal in the plug which is

English

marked with the letter “E” or by the earth symbol (z) or coloured GREEN or GREEN and YELLOW.

-The wire which is coloured BLUE must be connected to the terminal which is marked with the letter “N” or coloured BLACK.

-The wire which is coloured BROWN must be connected to the terminal which is marked with the letter “L” or coloured RED.

If the terminals in the plug are unmarked or you are in any doubt as to the correct connections, consult a qualified electrician.

3.In the UK only. Moulded plugs:

- Applicable only if moulded plug is fitted.

5

English

-Should it be necessary to remove a moulded on plug from the mains cable, it should be cut off and replaced with a suitable replacement.

-The moulded plug cannot be used for any other appliance, therefore remove the fuse and dispose immediately and safely to prevent anyone, especially children, from plugging it into a wall socket, which will create a safety hazard.

-Should the mains lead ever require a replacement, it is essential that this operation be carried out by a qualified

electrician and should only be replaced with a flexible cord obtained from the manufacturer.

-After replacement of a fuse in the plug, the fuse cover must be refitted. If the fuse cover is lost a replacement cover must be obtained. The colour of the correct replacement fuse cover is that of the coloured insert in the base of the plug or the colour that is embossed in words in the base of the plug recess or elsewhere on the plug. Always state this colour when ordering a replacement fuse cover.

-Only 13 amp. replacement fuses which are ASTA approved to BS 1362 should be fitted.

4.Check the rating plate (7) for voltage information.

5.The socket should be easily accessible and not directly behind the appliance.

6.Electrical connections must be made in accordance with local regulations. The appliance must be earthed as described by law (connected through a properly earthed plug and socket). The manufacturer rejects all liability for injury to persons and animals or damage to property resulting from failure to comply with this requirement.

7.A 10A fuse or one of a higher value must be used in the socket circuit.

8.If the appliance plug and the wall socket are incompatible, the socket must be replaced by a qualified electrician.

9.If the supply cord is damaged, it must be replaced by the manufacturer or his service agent or a similarly qualified person in order to avoid hazard.

10.Do not use extension leads or multiple adapters, etc.

11.In some countries a plug has to be fitted. Make sure that the installation and electrical connections are performed by a qualified technician in compliance with the manufacturer’s instructions and current local safety regulations. The wires in the mains lead are coloured in accordance with the following code:

-green/yellow = earth

-blue = neutral

-brown = live.

DISCONNECTION

Note: does not apply in the UK.

Electrical disconnection: remove the plug from the mains, or (if applicable) disconnect the two-pole circuit breaker upstream from the socket.

PROTECTING THE ENVIRONMENT

-The packaging may be completely recycled, as confirmed

IMPORTANT

1.Although this product was carefully checked before packing, please check the product for damage and for correct closing of the doors. Complaints must be reported to your retailer within 24 hours of delivery.

2.Installation instructions (7 drawings below).

3.Keep potentially hazardous packing materials (plastic bags, etc.) out of reach of children to prevent the risk of trapping and suffocation.

4.A red light ( and/or ) on the electronic control panel illuminates if the refrigerator temperature is not normal. Please check the sections “Trouble shooting guide” and “After sales service”, before you consult our customer service centre.

Check for damages and correct

Not in the vicinity of a heat source.

closing of the doors.

 

Keep room dry and well ventilated.

Keep more than 5cm distance space

 

at the top for ventilation.

Clean interior with a damp cloth.

Best room temperature range -

 

+16°C to +32°C.

Wait 2 hours before connecting to the mains.

6

Loading...
+ 4 hidden pages