DADD 1513-80B, 1513-80A, 1513-75Y, 1513-60Y, 1513-60B Datasheet
...
1513
FIXED SIP DELAY LINE
.810 MAX.
.020 TYP.
.600 TYP.
data
3
267
1
z = Impedance Code
TD/TR = 5
(SERIES 1513)
delay
devices, inc.
FEATURES PACKAGES
• Fast rise time for high frequency applications
• Very narrow device (SIP package)
• Stackable for PC board economy
• Low profile
• Epoxy encapsulated
GND IN OUT GND
• Meets or exceeds MIL-D-23859C
FUNCTIONAL DESCRIPTION
The 1513-series device is a fixed, single-input, single-output, passive
delay line. The signal input (IN) is reproduced at the output (OUT), shifted
by a time (TD) given by the device dash number. The characteristic
impedance of the line is given by the letter code that follows the dash
number (See Table). The rise time (TR) of the line is 20% of TD, and the 3dB bandwidth is given by 1.75 /
TD.
SERIES SPECIFICATIONS
• Dielectric breakdown: 50 Vdc
• Distortion @ output: 10% max.
• Operating temperature: -55°C to +125°C
• Storage temperature: -55°C to +125°C
• Temperature coefficient: 100 PPM/°C
IN
GND
Functional Diagram
.210
.020
TYP.
MAX.
.280
MAX.
.100
MIN.
.010
TYP.
1 2 6 7
.100
TYP.
Package Dimensions
1997 Data Delay Devices
OUT
GND
DASH NUMBER SPECIFICATIONS
Part
Number
1513-2.5A
1513-5A
1513-10A
1513-15A
1513-20A
1513-25A
1513-30A
1513-40A
1513-50A
1513-60A
1513-80A
1513-100A
1513-3.5Y
1513-7.5Y
1513-15Y
1513-22.5Y
1513-30Y
1513-37.5Y
1513-45Y
1513-60Y
1513-75Y
1513-90Y
1513-105Y
1513-120Y
1513-135Y
1513-150Y
1513-5B
1513-10B
1513-20B
1513-30B
1513-40B
1513-50B
1513-60B
1513-80B
1513-100B
1513-120B
1513-140B
1513-150B
Delay (ns) Rise Time
2.5 ± 1.0
5.0 ± 1.0
10.0 ± 1.0
15.0 ± 1.0
20.0 ± 1.0
25.0 ± 1.3
30.0 ± 1.5
40.0 ± 2.0
50.0 ± 2.5
60.0 ± 3.0
80.0 ± 4.0
100 ± 5.0
3.5 ± 1.0
7.5 ± 1.0
15.0 ± 1.0
22.5 ± 1.2
30.0 ± 1.5
37.5 ± 1.9
45.0 ± 2.3
60.0 ± 3.0
75.0 ± 3.8
90.0 ± 4.5
105 ± 5.3
120 ± 6.0
135 ± 6.8
150 ± 7.5
5.0 ± 1.0
10.0 ± 1.0
20.0 ± 1.0
30.0 ± 1.5
40.0 ± 2.0
50.0 ± 2.5
60.0 ± 3.0
80.0 ± 4.0
100 ± 5.0
120 ± 6.0
140 ± 7.0
150 ± 7.5
1513-xxz
xx = Delay (TD)
PIN DESCRIPTIONS
IN Signal Input
OUT Signal Output
GND Ground
(ns)
1.0 50
1.0 50
2.0 50
3.0 50
4.0 50
5.0 50
6.0 50
8.0 50
10.0 50
12.0 50
16.0 50
20.0 50
1.0 75
1.5 75
3.0 75
4.5 75
6.0 75
7.5 75
9.0 75
12.0 75
15.0 75
18.0 75
21.0 75
24.0 75
27.0 75
30.0 75
1.0 100
2.0 100
4.0 100
6.0 100
8.0 100
10.0 100
12.0 100
16.0 100
20.0 100
24.0 100
28.0 100
30.0 100
Impedance
(ΩΩ)
Doc #97022 DATA DELAY DEVICES, INC. 1
2/5/97 3 Mt. Prospect Ave. Clifton, NJ 07013
1513
PASSIVE DELAY LINE TEST SPECIFICATIONS
10%
10%
50%
50%
90%
90%
50%
50%
10%
10%
90%
90%INOUT
OUT
TRIGINTRIG
OSCILLOSCOPE
TEST CONDITIONS
INPUT: OUTPUT:
Ambient Temperature: 25oC ± 3oC R
Input Pulse: High = 3.0V typical C
Low = 0.0V typical Threshold: 50% (Rising & Falling)
Source Impedance: 50Ω Max.
Rise/Fall Time: 3.0 ns Max. (measured
at 10% and 90% levels)
Pulse Width (TD <= 75ns): PWIN = 100ns
Period (TD <= 75ns): PERIN = 1000ns
Pulse Width (TD > 75ns): PWIN = 2 x T
Period (TD > 75ns): PERIN = 10 x T
D
D
NOTE: The above conditions are for test only and do not in any way restrict the operation of the device.
PER
PW
IN
T
RISE
: 10MΩ
load
: 10pf
load
IN
T
FALL
INPUT
SIGNAL
OUTPUT
SIGNAL
PULSE
GENERATOR
R
50 Ω
V
IH
T
RISE
T
RISE
V
OH
Timing Diagram For Testing
IN
DEVICE UNDER
TEST (DUT)
RIN = R
OUT
= Z
LINE
T
FALL
V
IL
T
FALL
V
OL
R
OUT
Doc #97022 DATA DELAY DEVICES, INC. 2
2/5/97 Tel: 973-773-2299 Fax: 973-773-9672 http://www.datadelay.com
Test Setup
Loading...