RANGE MODELS: ER36D and ER48D
Backguard Kits
PN AERB36/48 -D3 -D9
INSTALLATION |
INSTRUCTIONS |
DANGER: Electric shock and explosion hazard! Before installation, disconnect power at the circuit breaker or fuse box and turn off the gas supply valve.
Style and size varies with kit
Preliminary |
Only |
|
|
||
For |
Review |
|
|
|
Instructions:
STEP 1: Make sure you have access to the back of the range so that you can tighten the screws into place.
STEP 2: Disconnect power to the range at the junction or fuse box. STEP 3: Turn off the gas at the gas supply valve.
WARNING: Do not disassemble the range until it has cooled.
STEP 4: Remove the screws on the front and back of the existing trim.
Slide the trim off the unit.
Existing Trim Removal
Part No. 101491 Rev. D-1