Bush ELED42240FHDCNTD3D Instruction manual

0 (0)

42” LED TV

APPROVED

Installation & Operating Instructions - Please keep for future reference

ELED42240FHDCNTD3D

259/7315

IMPORTANT - Please read these instructions fully before installing or operating

These instructions contain important information which will help you get the best from your television and ensure safe and correct installation and operation.

For any help concerning set up and use of your TV please call the

Customer Helpline:

Lines open: 9am - 8pm Monday to Saturday and 10am - 4pm Sunday

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

0 345 604 0105

Issue 1 - 9/2/11

Contents

Contents Contents 2

Safety Information 4 Support 7 Getting Started 8 Features & Accessories 8

Standby Notications 9

Viewing remote control 10 Attaching the Stand 11 Control Buttons & Operation 12 Aerial & Cable connection 13 Power connection 13 Wall Mounting 13 Remote control - Inserting batteries 13 Switching the TV On and Off 13

To Switch the TV On 13

To Switch the TV Off 13

First Time Installation 14 Information Banner 15 Connections 16 General TV Operation 22 Electronic programme guide (EPG) 22 Basic Operations 23

Displaying Subtitles 23

Zoom Modes 23

Using Main Menu Screen 23

Conguring Date/Time Settings 23

Source Settings 23

Current Language 23

Channel Management 24

Moving a Channel 24

Deleting a Channel 24

Renaming a Channel 24

Locking a Channel 24

Button Functions 24

Sorting Channel List 24

Favourite Mode & Timers 25

Favourite Mode 25

Conditional Access 25

Setting Sleep Timer 25

Setting Programme Timers 25

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Picture Controls 27

Conguring Picture Settings 27

Picture Settings Menu Items 27

PC Picture Controls 28

PC Picture Settings Operation 28

Sound & Source Controls 30 Other Controls 31 Language Settings 32

Language Settings 32

Media Browser 33

Starting Media Browser 33

Media Browser Conguration 33

Viewing Videos via USB 34 Video Playback Screen 34 Subtitle Time Correction 34 Viewing Photos via USB 34 Displaying Photos in Slideshow Mode 34 Playing Music via USB 34 Using MENU button in Media Browser Mode 35

Insallation Controls 36

Accessing Installation Menu 36 Automatic Channel Scan (Retune) 36 Manual Channel Scan 36 Analogue Fine Tune 36 First Time Installation 36 Clear Service List 36

Parental Control 37 Using the 3D Mode 38

Horizontal Viewing Angle 40

Teletext 42 Connectivity Functions 43 Connecting to a Wired Network 43 Connecting to a Wireless Network 44

Conguring Network Settings 45

Conguring Wired Device Settings 45

Network Type 45

Conguration Status 45

IP Address 45

Conguring Wired Network Settings in

Advanced Mode 45

Conguring Wireless Device Settings

(Optional) 45 Information 46

Contents

Delete Saved Wi Proles 46

Connecting to your Cell Phone via

WiFi (Optional) 46 Wireless Network Not Available 46

Connection is Slow 46 Distruption during playback or slow reactions 46

Using DLNA Network Service 47

Step 1: Nero Media Home Installation 47

Step 2: Connect to a Wired or Wireless

Network 47 Step 3: Play Shared Files via Media Browser 47

Internet Portal ) 48 iPlayer Application 48

HBBTV System 49

Internet Browser 50 Getting Started with Skype 51

Nero MediaHome Installation 56

Product Support 59

General Specications 60

Plug replacement - UK and Ireland only 61 Supported File Formats for USB Media

Browser 63 AV and HDMI Signal Compatibility &

Typical PC Resolutions 64 Supported DVI Resolutions 65 Software Upgrade 67

Manual Software Update 67

Disposal information 68

Guarantee 69

Model number

BUSH DVB-T-C ELED42240FHDCNTD3D

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Safety Information

IMPORTANT - Please read these instructions fully before installing or operating

The lightning ash with arrowhead symbol,

within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s

enclosure that may be of sufcient magnitude

to constitute a risk of electric shock of persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Preparation

Place the device on a solid even surface. For ventilation, leave a free space of at least 10 cm all around the set. T o prevent any fault and unsafe situations, do not place any objects on top of the set. Use this device in moderate climates.

Operation temperature and operation humidity: 0ºC up to 40ºC, 85% rel. humidity max. (not blocking ventilation openings).

Intended Use

This device is used to receive and display TV programmmes.The different connection options make an additional expansion of the reception and display sources possible (various external devices). This device is only suitable for the operation in dry interiors. This appliance is intended solely for private domestic use and may not be used for industrial and commercial

purposes. We exclude liability in principle, if the

device is not used as intended, or unauthorized

modications have been made. To operate your

LCD TV in extreme ambient conditions may cause the damage of the device.

WARNING: Never let people (including children) with physical, sensory or mental abilities or lack of experience and / or knowledge unsupervised use electrical device!

Children may not recognize dangers right! The swallowing of batteries can be fatal. Keep batteries always out of reach of small children. If a battery is swallowed, immediately seek medical

attention. Keep the packaging lms out of reach

of children. Risk of suffocation.

Power source

• The TV should be operated only from a 220240 V AC, 50 Hz outlet.

• Warning: Do not leave your TV in standby or operating mode when you leave your house.

Positioning the TV

• For ventilation, please leave a clear space of at least 10cm all around the TV.

• Do not block the ventilation openings.

• Do not place the TV on sloping or unstable

surfaces, the TV may tip over.

• To prevent damage to the TV, do not place any objects on top of the TV.

• Only use the TV in moderate climates.

Power cord and plug

• The power cord plug should be easily accessible. In case of storms and lightning, when going on holiday, or when the TV is not used for a long period of time disconnect the power cord from the mains power socket.

• The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable.

• Do not place the TV, furniture, etc. on the power cord or pinch the cord.

• Handle the power cord by the plug, do not unplug the TV by pulling the power cord.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Safety Information

IMPORTANT - Please read these instructions fully before installing or operating

• Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock.

• Never make a knot in the power cord or tie it with other cords.

• Power cords should be placed in such a way that they are not likely to be stepped on or driven over.

• A damaged power cord/plug can cause re or give you an electric shock. When damaged it

must be replaced, this should only be done by

qualied personnel.

Moisture and Water

• Do not use this TV in a humid or damp place (avoid bathrooms, the sink in the kitchen, and near the washing machine).

• Do not expose this TV to rain or water, as this may be dangerous.

• Do not place objects lled with liquids, such as ower vases, on top of the TV. Avoid from

dripping or splashing.

• If any solid object or liquid falls into the cabinet, unplug the TV and have it checked

by qualied personnel before operating it any

further.

Ventilation

• The slots and openings on the TV set are intended for ventilation and to ensure reliable operation.

• T o prevent overheating, these openings must not be blocked or covered in anyway.

Heat sources and Flames

• Do not expose the TV to direct sunlight or other heat sources.

• The TV should not be placed

near to open ames and sources

of intense heat such as an electric heater.

• Ensure that no open flame sources, such as lighted candles, are placed on top of the TV.

Headphone Volume

• Excessive sound pressure from earphones and headphones can cause hearing loss, please take care.

Wall Mounting (optional)

• To prevent injury, this TV must be securely attached to the wall in accordance with the installation instructions (if the option is available).

LCD Screen

• Occasionally, a few non-active pixels may

appear on the screen as a xed blue, green or

red point. Please note that this does not affect the performance of your product.

• Take care not to scratch the screen with

ngernails or other hard objects.

Cleaning

• Before cleaning, unplug the TV from the wall socket.

• Do not use liquid or aerosol cleaners. Only use a soft, dry cloth.

•

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Safety Information

IMPORTANT - Please read these instructions fully before installing or operating

Batteries

• Warning: Incorrect installation of batteries may cause battery leakage and corrosion, resulting in damage to the remote control.

• Do not mix old and new batteries, or batteries of different types.

• Do not dispose of batteries in a re.

• Do not dispose of batteries with normal

household waste, take to a local recycling centre.

CAUTION: Insert the batteries / rechargeable batteries in the correct polarity. Don´t try to recharge non rechargeable batteries and under

no circumstances throw them into re. Danger of

explosion. Do not use unequal batteries (old and new, Alkaline and carbon, etc.) simultaneously. If you will not use the device for a long time, remove the batteries and store the device in a dry and dust free place. Improper use of batteries may cause an explosion or leakage. If the batteries have leaked, use gloves and clean the appliance thoroughly with a dry cloth! Batteries should not be exposed to heat,

such as sunshine, re or the like.

Replacement Parts

When replacement parts are required, make sure

that the service technician has used replacement

parts, which are specied by the manufacturer or have the same specications as the original one. Unauthorised substitutions may result in re,

electrical shock or other hazards.

Taking out of service and storing

Unplug the TV from the mains and pack the TV in an appropriate cardboard box. Remove the batteries from the remote control and pack the remote control to the TV set.

NOTE: The TV set should be stored in a dry

and dust-free room.

Connection to a Television Distribution System (Cable TV etc.) from Tuner

Device connected to the protective earthing of the building installation through the mains connection or through other apparatus with a connection to protective earthing-and to a television distribution system using coaxial cable, may in some

circumstances create a re hazard.

Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range

(galvanic isolator, see EN 60728-11).

Symbols in this Instruction Book

The following symbols are used in the Instruction Book as a marker for restrictions and precautions and safety instructions. Note such information for security reasons.

WARNING

If you do not pay attention to such a marked warning, it can cause serious injury or death. Note these warnings strictly, in order to ensure a safe operation.

CAUTION

Such a precaution is marked, you should take up or note, to avoid injury or property damage. Note these instructions strictly, in order to ensure a safe operation.

IMPORTANT

Warnings on the appliance and restrictions are displayed

like this. Read this information strictly in order to operate the system correctly and avoid damage.

NOTE: Information about the operation and additional explanations are marked like this. To be aware of such information is recommended to

ensure that the functions can be used optimally.

The illustrations and the OSD in this operation manual are for explanation purposes and may vary slightly from the actual operations.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Support

The Argos Technical Helpline is here to help

Technical experts are available 7 days a week

• Simple help and advice on setting up your digital

equipment (image).

• Guidance on connecting other devices to your

television such as a DVD player, Sky, home cinema system or a games console.

• Order spare parts, including that lost remote

control.

• Any other technical issues you may need

assistance with.

Call us today: 0 345 604 0105

Local call rates applies*

Lines open 9am-8pm Monday to Saturday and 10am-4pm Sunday.

*Calls to Argos enquiry lines may attract a charge and set up fee from residential lines depending on your call plan/tariff. Mobile and other providers costs may vary, see www.bt.com/pricing for details.

For Security and training purposes, telephone calls to and from customer service centres maybe recorded and monitored. Calls from Republic of Ireland will attract international call charges.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Getting Started

Features & Accessories

TV - Features

• 3D Viewing: This product supports the 3D

viewing function via an available broadcast or via HDMI, PC,YPbPr, USB source.

• Remote controlled colour LCD TV .

• Fully integrated digital TV (DVB-T).

• HDMI connectors for digital video and audio.This connection is also designed to accept high denition

signals.

• USB input.

• 1000 programmes.

• OSD menu system.

• Scart socket for external devices (such as video,

video games, audio set, etc.).

• Stereo sound system.

• Teletext, fastext, TOP text.

• Headphone connection.

• Automatic programming system.

• Forward or backward manual tuning.

• Automatic power down after up to six hours.

• Sleep timer.

• Child lock.

• Automatic sound mute when no transmission.

• NTSC playback.

• AVL (Automatic Volume Limiting).

• PLL (Frequency Search).

• PC input.

• Plug&Play for Windows 98, ME, 2000, XP, Vista, Windows 7.

• Game Mode (optional).

• Picture off function.

• Ethernet (LAN) for Internet connectivity and

service

• Picture Off function

• 802.11n built in WIFI Support

• DLNA

• HBB TV

Accessories included

Remote Control Batteries: 2 x AAA Instruction Book

Quick Start Guide

Side AV Connection Cable Nero Media Home CD

3D Glasses x8

NOTE: Y ou should check the accessories after purchasing. Make sure that each accessory is included.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Getting Started

Standby Notications

If the TV switches off while in No Signal mode, the following on-screen message will be displayed on the next switch-on:

When the Auto Tv Off timeout is reached, the

following message will be displayed on the screen. Select YES to shut down the TV. Select NO to cancel. The TV will switch off as well, if you do not make a selection on this screen.

If the TV switches off owing to the auto power down feature, the following on-screen message will be displayed on the next switch-on:

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Getting Started

.,/@

Q.MENU

EXIT

BACK

LANG.

SOURCE

P+

P-

V+

V-

Viewing remote control

1. Source

2. Launches Netix Application

3. Internet Portal

4. Play ( in media browser mode )

5. No function

6. Rapid reverse ( in media browser mode )

7. Mono/Stereo - Dual I-II / Current language

(in DVB channels)

8. Green button

9. Red button

10. Numeric buttons

11. Channel List/TV source

12. Menu

13. Volume up / down

14. Back (Return) / Index (in TXT mode)

15. Favourite channel list

16. Expand (in TXT mode) / Screen size

17. My button 1 / Youtube (*)

18. My button 2 (**)

19. Teletext / Mix

20. Electronic programme guide

21. Mute

22. Info / Reveal (in TXT mode)

23. Exit

24. Ok / Select / Hold (in TXT mode)

25. Programme up / down

26. Navigation buttons

27. Quick menu

28. Previous programme

29. Blue button

30. Yellow button

31. Subtitle on / off

32. Rapid advance ( in media browser mode )

33. Stop ( in media browser mode )

34. Pause (in media browser mode)

35. Media browser

36. Launches Youtube

37. Standby button

38. Function LED

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Using My button 1 (*)

This button’s main function is to run Youtube link. However, if you want to change this function, you

can press MY BUTTON 1 for ve seconds when

on a desired source, channel or link, until the “MY BUTTON IS SET” message is displayed on the

screen. This conrms that the selected MY BUTTON

is now associated with the selected function. Note that

if you perform rst time installation, MY BUTTON 1

will return to its default function

Using My Button 2 (**)

This button’s main function is to switch between DVB-T and DVB-C broadcasts. However, if you press MY BUTTON 2 for ve seconds, you can set a function to it as described in My Button 1.

Note that if you perform rst time installation, MY

BUTTON 2 will return to its default function.

Getting Started

Attaching the Stand

1. Stand is placed on a at surface (g.1).

2. The product is held over the stand so that

it coincides with the stand mounting point and then it is left to be mounted with its own

weight (g.2).

g.1

g.2

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Getting Started

Control Buttons & Operation

1. Standby button

2. TV/AV button

3. Programme Up/Down buttons

4. Volume Up/Down buttons

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Getting Started

Aerial & Cable connection

Connect the “aerial” or “cable TV” plug to AERIAL INPUT (ANT.) socket located on the back of the TV (g.1).

Power connection

IMPORTANT :The TV set is designed to

operate on 220-240V AC, 50 Hz. Please note: After unpacking, allow the TV

to reach ambient room temperature before connecting the TV to the mains power socket.

Connect the power cord plug to the mains power socket. The LED on the front of the TV then lights up, this

indicates that the TV is in ‘Standby’ mode.

Wall Mounting

When wall mounting please ensure you use a

compatible wall mount (not supplied). This TV

conforms to the VESA mounting specications and

is 400 x 400mm.

Remote control - Inserting batteries

Remove the battery cover on the back of the remote control, gently push down and pull backwards at the same time as shown.

Insert two AAA/R3 or equivalent type batteries. Ensure the batteries are inserted the correct way and replace the battery cover (g.2).

NOTE: When the remote control is not going to be used for long periods of time, the batteries should be removed. Otherwise the remote control may be damaged, caused by battery leakage and corrosion.

Switching the TV On and Off

To Switch the TV On

Connect the power cord to the 220-240V AC, 50 Hz.

To switch on the TV from standby mode either: Press the “

on the remote control. Press the “

on the TV . Press the side function switch until the TV comes

on from standby.

” button, P+ / P- or a numeric button

Aerial or Cable

VGA

SPDIF

(g.1)

AAA/R3 x 2 Batteries

(g.2)

To Switch the TV Off

Press the “

“ button on the remote control

or hold the “

“ switch on the Tv until shut down, so

the TV will switch to standby mode.

To power down the TV completely , unplug the power cord from the mains socket.

Note: When the TV is switched to standby mode, the standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active. The LED can also blink when you switch on the TV from standby mode.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Getting Started

First Time Installation

When turned on for the rst time, the “language

selection” menu appears. The message “Welcome please select your language!” is displayed in all

language options listed alphabetically.

Press the “ ” or “ ” button to highlight the required language, press OK button to select. “First Time

Installation” appears. Use “ required country, and press “ ” button to select Search

Type. Use ” or “ ” to set the desired search type. Available search types are Digital and analog, digital only and analog only. When set, press “ ” to select

T eletext Language. Use “ ” or “ ” button to set the “T eletext Language” and select “Scan Encrypted” using “ ” or “ ” button. Y ou can set Scan Encrypted as Yes if you want to scan coded stations.

” or “ ” button to set the

best display quality. A conrmation screen will be

displayed after selecting the Store Mode. Select YES to proceed.

If Home Mode is selected, Store mode will not be available after the First Time Installation. P re s s OK button on the remote control to continue and the following message will be displayed on the screen.

Y ou must select a search type to search and store broadcasts from the desired source.

Aerial Installation

If you select AERIAL option from the Search Type screen, the television will search for digital terrestrial TV broadcasts.

Press OK button on the remote control to continue and the following message will be displayed on the screen.

You can activate Store mode option by using “ ” or “ ” button. If Store Mode (optional) is selected,

Store mode option will be available in other settings menu and your TV’s settings will be optimized for

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

NOTE: Y ou can press “MENU” button to cancel.

After all the available stations are stored, Channel List will be displayed on the screen. If you like the sort channels, according to the LCN (if available*), please

select “Y es” and than press OK.

Press OK button to quit channel list and watch TV.

(*) LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel sequence.

Getting Started

Cable Installation

If you select CABLE option and press OK button on the remote control to continue, the following message will be displayed on the screen:

T o continue please select YES and press OK. To cancel operation, select NO and press OK.

You can select frequency ranges from this screen. For highlighting lines you see, use “ ” or “ ” button.

You can enter the frequency range manually by using the numeric buttons on the remote control.

Set Start and Stop Frequency as desired by using numeric buttons on the remote control.

After this operation, you can set Search Step as 8000 KHz or 1000 KHz.

If you select 1000 KHz, the TV will perform search process in a detailed way. Searching duration will thus increase accordingly.

When finished, press OK button to start automatic search. The TV will search and store available broadcasts.

(*) Network option will not be available for UK.

Information Banner

Whenever you change channel using the P-/P+ buttons or the numeric buttons, the TV displays the broadcast picture along with an information banner at the bottom of the screen.

The information banner can be displayed at any time while watching TV by pressing the INFO

button on the remote control (g.8).

Hint: Not all channels broadcast the programme data. If the name and time of the programme are not available, then information banner will be displayed with blanks.

If the selected channel is locked, you must enter the correct four-digit numeric code to view the channel (default code is 0000, except for the France). “Enter PIN” will be displayed on the screen in such a case.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Connections

Back connections explained

1. Ethernet (LAN) Input

2. HDMI Input

Connects a device that has an HDMI socket. The TV can display High Definition pictures

from devices such as a High Denition Satellite

Receiver or DVD Player. These devices must be connected via the HDMI sockets or Component Socket. No sound connection is needed for an HDMI to HDMI connection.

3. S/PDIF Out

Outputs audio signals of the currently watched sourc e. Use an SPDIF audio cable to trasfer audio signals to a device that has S/PDIF input.

4. PC Input (VGA)

Connects a personal computer to the TV . Connect the PC cable between the PC INPUT on the TV and the PC output on the PC. Y ou can use the PC input to allow YPbPr signal connection with a device that has component output. Connect the YPbPr to PC cable between the PC INPUT on the TV and the component video outputs of the device.

5. SCART socket

Inputs or outputs for external devices. Connect the SCART cable between the SCART socket on the TV and the SCART socket on the external device (decoder, VCR or DVD player).

NOTE: If an external device is connected via the SCART sockets, the TV will automatically switch to AV mode. When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not be available via the scart sockets.

6. RF Input (ANT.)

Connects to aerial (antenna) or cable TV. If you use a decoder or a media recorder, you should connect the aerial cable through the device to the TV with an appropriate aerial cable.

SPDIF

VGA

NOTE: When using the wall mounting kit (optional), we recommend that you plug all your cables into the back of the TV before mounting on the wall.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Connections

SIDE AV

5Vdc

Max:500mA

5Vdc

Max:500mA

Left side connections explained

7. CI Slot

Used to insert a CI card. A CI card allows you to view all the channels that you subscribe to. For more information, see “Conditional Access” section.

8. USB Input

To connect USB disks to the TV, providing fast data exchange.

9. Side audio-video input

This input is used for connecting video and audio signals of external devices. To make a video connection, you must use the supplied AV connection cable for enabling connection. First, plug singular jack of the cable to the TV’s Side AV socket. Afterwards, insert your video cable (not supplied) connector into the

YELLOW input (located on the side with several

connectors) of the supplied A V connection cable. Colours of the connected jacks should match. To enable audio connection, you must use RED

and WHITE inputs of the side AV connection

cable. Afterwards, insert your device’s audio

cable connectors into the RED and WHITE jack

of the supplied side A V connection cable. Colours of the connected jacks should match.

10. Headphone

Headphone jack is used for connecting an external headphone to the system. Connect to the HEADPHONE jack to listen to the TV from headphones.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Connections

HDMI 1

DMH I 2

SPDIF

Coax.OUT

PC Input

(back)

Side AV Input

PC VGA Cable (not supplied)

PC Audio Cable

(not supplied)

Side Audio/Video

Connection Cable

(supplied)

SIDE AV

HDMI Connections

HDMI lets you enjoy high denition digital images

and high quality sound by connecting the TV to external devices such as DVD players, set top boxes or gaming equipment (g.1).

Power off both the TV and the device before making any connections. For more information, refer to your device’s own instruction book. After making the connection, switch to HDMI 1, HDMI 2 as a source, depending on which HDMI connector the external equipment is connected. See, Input Selection section for more information on changing sources.

NOTE: HDMI cable is not supplied.

SCART Connections

Most devices support SCART connection. You can connect a; DVD recorder, VCR or decoder to the TV using the SCART socket (g.2).

Power off both the TV and the device before making any connections. For more information, refer to your device’s own instruction book. The Scart cable is not supplied.

NOTE:If your external device has a S-Video output, it is possible to connect your external device with a SCART-S-video adapter (not included) to the scart input of the

TV. First plug the SCART S-Video adapter to the SCART connector on your TV set. Then, connect a S-video cable to the SCART socket (via the Scart S-Video adapter) to the S-video output of your external device.

VGA Connections

You can connect a computer (PC) to the TV to display your computer’s screen image on the TV. Power up both computer and TV before making any connections. Use a 15-pin D-sub display cable to connect a PC to the TV . Y ou must

use audio inputs of side AV connection cable (RED & WHITE) to enable sound connection when connecting a device to your TV by using the PC input. (g.3). When the connection is

made, switch “Source” to “PC-VGA”. Set the

resolution that suits your viewing requirements. Resolution information can be found in the “Appendix parts” .

NOTE: The cable is not supplied.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

VGA

SPDIF

(g.1)

Scart Cable

(not supplied)

External device

(g. 2)

(g. 3)

HDMI Cable

(not supplied)

External device

Connections

Side AV Connections

You must use the supplied SIDE AV connection cable for enabling SIDE AV connection.

1. Plug single jack of the cable to the TV’s SIDE AV socket.

2. Insert your A V cable’s (not supplied) connectors into the plural part of the SIDE AV connection cable (see illustration below). Colours of the connected jacks should match.

3. To enable audio connection, use an audio cable. Insert your device’s audio cable’s connectors into the plural part of the SIDE AV connection cable. Colours of the connected

jacks should match (g.1).

4. When the connection is made, switch to FAV

source.

Using a Conditional Access Module

IMPORTANT: Insert or remove the CI module only when the TV is SWITCHED OFF .

In order to watch certain digital channels, a conditional access module (CAM) can be necessary. This module must be inserted in the CI

slot of your TV (g. 2).

1. Obtain the Conditional Access Module (CAM) and

the viewing card by subscribing to a pay channel company, then insert those to the TV using the following procedure.

2. Insert the CAM and then the viewing card to the slot that is located in the terminal cover at the rear side of the TV.

3. The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted.

4. Connect the TV to the mains supply, switch on and then wait for few moments until the card is activated.

5. When no module is inserted, “No Common Interface module detected” message appears

on the screen. You can refer to the module instruction manual for

details of the settings.

SIDE AV

AV Connection

Cable (supplied)

(g.1)

(g.2)

AV Cable

(not supplied)

module

Camera

CAM

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Connections

USB Connections

2.5” and 3.5” inch (hdd with external power supply) external hard disk drives are supported.

IMPORTANT

You should back up your les before making

any connections to the TV set in order to avoid any possible data loss. Note that manufacturer will not be responsible for any

le damage or dataloss.

It is possible that certain types of USB devices (e.g. MP3 Players) or USB hard disk drives/ memory sticks may not be compatible with this TV .

USB Disk Connection

Plug your USB device to the USB input of the TV .

NOTE: Plug or unplug your USB disk while the TV is

switched off. If you are going to connect a USB hard disk

drive to the TV set, USB connection cable used between the disk drive and the TV should have a USB logo and should be as short as possible.

While formatting a USB hard disk that has 1TB (Tera Byte) or more file capacity, you can experience problems with the formatting process. In such a case, you should format the disk with your personal computer and the formatted disk type should be FAT32.

CAUTION:

Quickly plugging and unplugging USB devices, is a very hazardous operation. Especially, do not repeatedly quickly plug and unplug the drive. This may cause physical damage to the USB player and especially the USB device itself. Do not pull out USB module

while playing or recording a le.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Connections

Selecting source

Once you have connected external devices to the TV , you can select and change the input source required.

To change Input Selection, use one of the following options:

Option a: Press the SOURCE button on the remote control to directly select required source.

Option b: Select “SOURCES” from the “Settings” menu using the “

” or “ ” button.

Use the “ required input and press the “

select.

” or “ ” button to highlight the

” button to

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

General TV Operation

Electronic programme guide (EPG)

Some, but not all channels send information about the current and next programmes. Press

the EPG button to view the EPG menu.

Info bar commands:

RED button - Prev day: Displays previous day. GREEN button - Next Day: Displays next day. YELLOW button - Prev. day: Zooms to

programmes. INFO button - Details: displays, in detail

information on programme selected. SWAP button - Now: jumps to the current

broadcast (when viewing previous “Prev. day” or future “Next day” programmes).

SUBT.: Selects genre. Numeric buttons: Jump. Go to preferred

channel directly using number buttons.

OK button : Displays programme options. TELETEXT button - Search: to view “Guide

Search” menu. Using this feature, you can search the programme guide database in line with the genre selected or with name match and on the day/s selected.

EPG screen in regular mode

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

+ 49 hidden pages