Bush LED22982FHDS Instruction manual

22” LED TV

Installation & Operating Instructions - Please keep for future reference

529/9146

LED22982FHDS

IMPORTANT - Please read these instructions fully before installing or operating

These instructions contain important information which will help you get the best from your television and ensure safe and correct installation and operation.

For any help concerning set up and use of your TV please call the

Customer Helpline: 0044 845 604 0105

Lines open: 9am - 8pm Monday to Saturday and 10am - 4pm Sunday

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

Issue 1 - 9/2/11

Contents

	Contents	2		Connections
				Back connections explained
	Contents	3
	Preparation	4		Left side connections explained
				HDMI Connections
	Intended Use	4
				SCART Connections
	Power source	4
	Positioning the TV	4		VGA Connections
	Power cord and plug	4		Side AV Connections
	Moisture and Water	5		Using a Conditional Access Module
	Ventilation	5		USB Connections
	Heat sources and Flames	5		Basic Features
	Headphone Volume	5		How to navigate menus - Selecting source
	Wall Mounting (optional)	5		Electronic programme guide (EPG)
	LCD Screen	5
				General Operation
	Cleaning	5
				Displaying Subtitles
	Batteries	5
				Zoom Modes
	Replacement Parts	6
				Using Main Menu Screen
	Servicing	6
				Configuring Date/Time Settings
	Taking out of service and storing	6
				Source Settings
	Connection to a Television Distribution System
				Audio Language
	(Cable TV etc.) from Tuner	6
				Basic Features
	Symbols in this Instruction Book	6
				Navigating Channel List
	Support	7
				Moving a Channel
	TV - Features	8
				Deleting a Channel
	Viewing remote control - TV	9
				Renaming a Channel
	Getting Started	10
				Locking a Channel
	Attaching the Stand	10
				Sorting Channel List
	Getting Started	11
				Language Settings
	TV - Control buttons (left side)	11		Language Settings
	Aerial connection	12		Other Functions and Features
	Power connection	12		Favourite Mode
	Remote control - Inserting batteries	12		Conditional Access
	Wall Mounting	12		Setting Sleep Timer
	Switching the TV On and Off	12		Setting Programme Timers
	Switching the TV On 	12		Editing a Timer
				Deleting a Timer
	Switching the TV Off	12
				Picture Controls
	Operation using TV control buttons	13
	Operation using Remote control buttons	13		Configuring Picture Settings
	Initial set up	14		Operating Picture Settings Menu Items
	General operation	14		Picture Settings Menu Items
	Information Banner	14		PC Picture Settings Operation
				Sound and Source Settings

Configuring Sound Settings

Sound Settings Menu Items

Configuring Source Settings

Other Controls

Operation

Other Settings Menu Items

15

15

16

17

17

17

18

18

19

20

20

20

21

21

21

21

21

21

21

22

22

22

22

22

22

22

24

24

25

25

25

25

25

25

25

26

26

26

26

26

27

27

27

27

28

28

28

2	For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

Contents

	Advanced Features	29
	Media Browser	29
	Starting Media Browser	29
	Media Browser Configuration	29
	Operation	29
	View Style	29
	Slide Show Interval	29
	Show Subtitle	29
	Subtitle Language	29
	Subtitle Position	29
	Subtitle Font Size	29
	Loop / Shuffle during Playback	29
	Media Browser - continued	30
	Viewing Videos via USB	30
	Video Playback Screen	30
	Subtitle Time Correction	30
	Viewing Photos via USB	30
	Displaying Photos in Slideshow Mode	30
	Playing Music via USB	30
	Setting the channels	31
	Accessing Installation Menu	31
	Automatic Channel Scan (Retune)	31
	Manual Channel Scan	31
	Analogue Fine Tune	31
	First Time Installation	31
	Clear Service List	31
	Parental Control	32
	Other Information	33
	Teletext	33
	Analogue Teletext	33
	Digital Teletext (for the UK only)	33
	Specifications	34
	Other Information	35
	Plug replacement - UK and Ireland only	35
	Other Information	36
	Product Support	37
	Trouble shooting	37
	Disposal information	38
	Supported DVI Resolutions	38
	Supported File Formats for USB Mode	39
	AV and HDMI Signal Compatibility (Input Signal
	Types)	39
	PC Input Typical Display Modes	40
	Definition of important terms - TV	41
	Software Upgrade	42
	Guarantee	43

Model number

BUSH DVB-T LED22982FHDS

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

3

Safety Information

Accessories Included

IMPORTANT - Please read these instructions fully before installing or operating

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock of persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Preparation

Place the device on a solid even surface. For ventilation, leave a free space of at least 10 cm all around the set. To prevent any fault and unsafe situations, do not place any objects on top of the set. Use this device in moderate climates.

Operation temperature and operation humidity: 5ºC up to 45ºC, 85% rel. humidity max. (not blocking ventilation openings).

Intended Use

This device is used to receive and display TV programmmes.The different connection options make an additional expansion of the reception and display sources possible (various external devices). This device is only suitable for dry interior use. This appliance is intended solely for private domestic use and may not be used for industrial and commercial purposes. We exclude liability in principle, if the device is not used as intended, or unauthorized modifications have been made. To operate your LCD TV in extreme ambient conditions may cause the damage of the device.

WARNING: Never let people (including children) with physical, sensory or mental abilities or lack of experience and / or knowledge unsupervised use electrical device!

Children may not recognize dangers right! The swallowing of batteries can be fatal. Keep batteries always out of reach of small children. If a battery is swallowed, seek immediate medical attention. Keep the packaging films out of reach of children, there is a risk of suffocation.

Power source

•The TV should be operated only from a 220-240V AC, 50 Hz outlet.

• Warning: Do not leave your TV in standby or operating mode when you leave your house.

Positioning the TV

•For ventilation, please leave a clear space of at least 10cm all around the TV.

•Do not block the ventilation openings.

•Do not place the TV on sloping or unstable surfaces, the TV may tip over.

•To prevent damage to the TV, do not place any objects on top of the TV.

•Only use the TV in moderate climates.

Power cord and plug

•The power cord plug should be easily accessible. In case of storms and lightning, when going on holiday, or when the TV is not used for a long period of time disconnect the power cord from the mains power socket.

•The mains plug is used to disconnect TV set from the mains and therefore it must remain readily accessible.

•Do not place the TV, furniture, etc. on the power cord or pinch the cord.

•Handle the power cord by the plug, do not unplug the TV by pulling the power cord.

•Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock.

•Never make a knot in the power cord or tie it with other cords.

•Power cords should be placed in such a way that they are not likely to be stepped on or driven over.

•Adamaged power cord/plug can cause fire or give you an electric shock. When damaged it must be replaced, this should only be done by qualified personnel.

4	For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

Safety Information

Accessories Included

IMPORTANT - Please read these instructions fully before installing or operating

Moisture and Water

Batteries

•Do not use this TV in a humid or damp place (avoid bathrooms, the sink in the kitchen, etc.

•Do not expose this TV to rain or water, as this may be dangerous.

•Do not place objects filled with liquids, such as flower vases, on top of the TV.Avoid from dripping or splashing.

•If any solid object or liquid falls into the cabinet, unplug the TV and have it checked by qualified personnel before operating it any further.

Ventilation

•The slots and openings on the TV set are intended for ventilation and to ensure reliable operation.

•To prevent overheating, these openings must not be blocked or covered in anyway.

Heat sources and Flames

•Do not expose the TV to direct sunlight or other heat sources.

•The TV should not be placed near to open flames and sources of intense heat such as an electric heater.

•Ensure that no open flame sources,

such as lighted candles, are placed on top of the TV.

Headphone Volume

• Warning: Incorrect installation of batteries may cause battery leakage and corrosion, resulting in damage to  the remote control.

•Do not mix old and new batteries, or batteries of different types.

•Do not dispose of batteries in a fire.

•Do not dispose of batteries with normal household waste, take to a local recycling centre.

CAUTION: Insert the batteries / rechargeable batteries in the correct polarity. Don´t try to recharge non rechargeable batteries and under no circumstances throw them into fire. Danger of explosion. Do not use unequal batteries (old and new, Alkaline and carbon, etc.) simultaneously. If you will not use the device for a long time, remove the batteries and store the device in a dry and dust free place. Improper use of batteries may cause an explosion or leakage. If the batteries have leaked, use gloves and clean the appliance thoroughly with a dry cloth! Batteries should not be exposed to heat, such as sunshine, fire or the like.

•Excessive sound pressure from earphones and headphones can cause hearing loss, please take care.

Wall Mounting (optional)

•To prevent injury, this TV must be securely attached to the wall in accordance with the installation instructions (if the option is available).

LCD Screen

•Occasionally, a few non-active pixels may appear on the screen as a fixed blue, green or red point. Please note that this does not affect the performance of your product.

•Take care not to scratch the screen with fingernails or other hard objects.

Cleaning

•Before cleaning, unplug the TV from the wall socket.

•Do not use liquid or aerosol cleaners. Only use a soft, dry cloth.

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

5

Safety Information

Accessories Included

IMPORTANT - Please read these instructions fully before installing or operating

Replacement Parts

When replacement parts are required, make sure that the service technician has used replacement parts, which are specified by the manufacturer or have the same specifications as the original one. Unauthorised substitutions may result in fire, electrical shock or other hazards.

Servicing

• Warning: Risk of electric shock, do not attempt to repair, service or modify this TV yourself. Contact the manufacturer, their approved service agent or the Customer Helpline: 0845 604 0105.

Taking out of service and storing

Unplug the TV from the mains and pack the TV in an appropriate cardboard box. Remove the batteries from the remote control and pack the remote control to the

set.

NOTE: The TV set should be stored in a dry and dust-free room.

Connection to a Television Distribution System (Cable TV etc.) from Tuner

Device connected to the protective earthing of the building installation through the mains connection or through other apparatus with a connection to protective earthing-and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard.

Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11).

Symbols in this Instruction Book

The following symbols are used in the Instruction Book as a marker for restrictions and precautions and safety instructions. Note such information for security reasons.

WARNING

If you do not pay attention to such a marked warning, it can cause serious injury or death. Note these warnings strictly, in order to ensure a safe operation.

CAUTION

Such a precaution is marked, you should take up or note, to avoid injury or property damage. Note these instructions strictly, in order to ensure a safe

.

IMPORTANT

Warnings on the appliance and restrictions are displayed like this. Read this information strictly in order to operate

system correctly and avoid damage.

NOTE: Information about the operation and additional explanations are marked like this. To be aware of such information is recommended to ensure that the functions can be used optimally.

6	For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

Support

The Argos Technical Helpline is here to help

Technical experts are available 7 days a week

•Simple help and advice on setting up your digital equipment (image).

•Guidance on connecting other devices to your television such as a DVD player, Sky, home cinema system or a games console.

•Order spare parts, including that lost remote control.

•Any other technical issues you may need assistance with.

Call us today: 0044 845 604 0105

Local call rates applies*

Lines open 9am-8pm Monday to Saturday and 10am-4pm Sunday.

*Calls to Argos enquiry lines may attract a charge and set up fee from residential lines depending on your call plan/tariff. Mobile and other providers costs may vary, see www.bt.com/pricing for details.

For Security and training purposes, telephone calls to and from customer service centres maybe recorded and monitored. Calls from Republic of Ireland will attract international call charges.

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

7

Getting Started

TV - Features

•Remote controlled colour LCD TV.

•Fully integrated Terrestrial digital TV, (MPEG4)

•HDMI connectors for digital video and audio. This connection is also designed to accept high definition signals.

•USB input.

•1000 programmes (analogue+digital).

•OSD menu system.

•Integrated tuner, MPEG 4 compatible.

•Scart socket for external devices (such as video, video games, audio set, etc.).

•Stereo sound system. (German+Nicam)

•Teletext, fastext, TOP text.

•Headphone connection.

•Automatic programming system.

•Forward or backward manual tuning.

•Sleep timer / Child lock.

•Automatic sound mute when no transmission.

•NTSC playback.

•AVL (Automatic Volume Limiting).

•Auto power down.

•PLL (Frequency Search).

•PC input.

•Plug&Play for Windows 98, ME, 2000, XP, Vista,

Windos 7.

•Game Mode

Accessories included

Remote Control

Batteries: 2 x AAA

Instruction Book

Quick Start Guide

Side AV Connection Cable

Optional Accessories mount bracket

NOTE:You should check the accessories after purchasing. Make sure that each accessory is included.

8	For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

Getting Started - TV

Viewing remote control - TV

1.Standby

2.Mono/Stereo - Dual I-II / Currrent Language (in DVB channels)

3.Image size

4.Green button

5.Red button

6.Numeric buttons

7.Teletext / Mix(in TXT mode)

8.Cursor Left

9.Menu on-off

10.AV / Source selection

11.Favourite Mode Selection(in DVB channels)

12.Volume Up

13.Info / Reveal (in TXT mode)

14.Mute

15.Volume Down

16.Programme Down / Page up(in DVB channels)

17.Electronic programme guide(in DVB channels)

18.Programme Up / Page down(in DVB channels)

19.Sleep Timer

20.Picture mode selecion

21.Okay (Confirm) / Hold (in TXT mode)/ Edit Channel List

22.Cursor Down

23.Exit / Return / Index page (in TXT mode) 24.Cursor Right / Subpage (in TXT mode) 25.Cursor Up

26.Previous programme

27.Yellow button

28.Blue button

29.No function

30.Subtitle on-off (in DVB channels)

1
2
3	SCREEN	LANG	SUBTITLE
4	1	2	3
5
6	5	6	7
7		9	0
8
9	MENU

10 OK

		SOURCE FAV	PRESETS
11		V+	P+
12		?
	V	INFO
14
13		V-	P-

15

PIP

4

8

RETURN

SLEEP

E PG

30

29

28

27

26 25 24

23

22

21

20

V1918

17

16

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

9

Getting Started

Attaching the Stand

1. Stand is placed on a flat surface (fig.1).

2. The product is held over the stand so that it coincides with the stand mounting point and then it is left to be mounted with its own weight (fig.2).

fig.1

fig.2

10	For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

Getting Started

TV - Control buttons (left side)

1.Up direction

2.Down direction

3.Programme/Volume / AV / Standby-On selection switch

The Control switch allows you to control the Volume/ Programme/ Source and Standby-On functions of the TV.

To change volume: Increase the volume by pushing the button up. Decrease the volume by pushing the button down.

To change channel: Press the middle of the button, the channel information banner will appear on screen. Scroll through the stored channels by pushing the button up or down

To change source: Press the middle of the button twice, the source list will appear on screen. Scroll through the available sources by pushing the button up or down.

To turn the TV off: Press the middle of the button down and hold it down for a few seconds, the TV will turn into standby mode.

NOTE: You can move the switch, upward or downward to change the volume. If you want to change the channel, press the middle of the switch once (Position 3) and then move upward or downward. If you press the middle of the switch once more, the source OSD will be displayed. To select desired source, move the switch upward or downward and release. If you press the middle of the switch and hold for a few seconds, the TV will switch to standby mode. The Main menu OSD cannot be displayed via the control buttons on the TV.

Standby-LED

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

11

Getting Started

Aerial connection

Connect the “aerial” or “cable TV” plug to AERIAL INPUT (ANT.) socket located on the back of the

TV (fig.1).

Power connection

IMPORTANT :The TV set is designed to operate on 220-240V AC, 50 Hz.

Please note: After unpacking, allow the TV to reach ambient room temperature before connecting the TV to the mains power socket.

Connect the power cord plug to the mains power socket.

The LED on the front of the TV then lights up, this indicates that the TV is in ‘Standby’ mode.

Remote control - Inserting batteries

Remove the battery cover on the back of the remote control, gently push down and pull backwards at the same time as shown.

Insert two AAA/R3 or equivalent type batteries. Ensure the batteries are inserted the correct way and replace

battery cover (fig.2).

NOTE: When the remote control is not going to be used for long periods of time, the batteries should be removed. Otherwise the remote control may be damaged, caused by battery leakage and corrosion.

Wall Mounting

When wall mounting please ensure you use a compatible wall mount (not supplied). This TV conforms to the VESA mounting specifications and is 75 x 75 mm.

2DMI H	1DMI H
SPDIF
Coax.OUT

fig.1

+- -+

AAA/R3 x 2

fig.2

Batteries

Switching the TV On and Off

Switching the TV On

With power cord plug connected to the mains power socket, the TV is in ‘Standby’ mode.

To switch the TV on from standby mode:

Press the “ ” button and the TV will switch to standby mode. Then the standby LED lights up.

To switch on the TV from standby mode either:

a.Press the “” button, P+ / P- or a numeric button on the remote control.

b.Press the middle of the “ ” button on the TV..

By either method the TV will switch on.

Switching the TV Off

Press the “” button on the remote control or press the standby “ ” button, so the TV will switch to standby mode.

To turn off the TV completely, remove the power cord plug from the mains power socket.

NOTE: When the TV is in standby mode, the standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active.

NOTE: If you switch on your TV via P +/- buttons on the remote control or +/- on the TV set, the programme that you were watching last will be reselected.

12	For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

Getting Started

Operation using TV control buttons

The main menu OSD (On Screen Display) cannot be displayed using the TV control buttons.

The Control switch allows you to control the Volume/ Programme/ Source and Standby-On functions of the TV.

To change volume: Increase the volume by pushing the button up. Decrease the volume by pushing the button down.

To change channel: Press the middle of the button, the channel information banner will appear on screen. Scroll through the stored channels by pushing the button up or down

To change source: Press the middle of the button twice, the source list will appear on screen. Scroll through the available sources by pushing the button up or down.

To turn the TV off: Press the middle of the button down and hold it down for a few seconds, the TV will turn into standby mode.

Operation using Remote control buttons

The remote control is designed to control all the functions of the model you selected.

Volume Setting

Press “V +” button to increase the volume. Press “V -” button to decrease the volume. A volume level scale (slider) will be displayed on the screen.

Programme Selection (Previous or Next Programme)

Press P- button to select the previous programme. Press P+ button to select the next programme.

Programme Selection (Direct Access)

Press number buttons on the remote control to select programmes between 0 and 9. The TV will switch to the selected programme.

To select programmes between 10-500 (IDTV) or 10-199 (analogue), press the number buttons consecutively.

SCREEN	LANG	SUBTITLE	PIP
1	2	3	4
5	6	7	8
MODE	9	0
o
MENU			RETURN
	OK
SOURCE	FAV	PRESETS	SLEEP
	V+	P+

?

INFO

EPG

V- P-

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

13

Getting Started

Initial set up

When turned on for the first time,	selection
message is displayed (fig.1). Press the “	” or “

” button to highlight the required language, press OK button to select. “First Time Installation” appears. Use“ ” or “ ” button to set the required country, and press “ ” button to select “Teletext Language”. Use “ ” or

“” button to set the “Teletext Language” and select

“Scan Encrypted” using “	or “ ” button. Set “Scan
Encrypted” using “ ” or “	” button (fig.2).

Press OK button on the remote control to continue and the confirmation screen will be displayed on the screen (fig3.).To start automatic select Yes (to cancel No), highlight the item required using the “ ” or “ ” button and press to select. The search will start (fig.4).

IMPORTANT: Do not turn off the TV while “First Time Installation” is in operation.

After all the available stations are stored, Channel List will be displayed on the screen. If LCN (*) is available in your country, a message appears on the screen which asks you if you want to sort the channels according to LCN. In some countries, the order of the channels is arranged automatically by the broadcaster. This is called logical channel number (LCN). If the selected country has LCN support, the channels will be enumerated one by one, beginning from number 1. You cannot move any programme to a position after the last saved one. If you try to do this, both programmes will change their places. If LCN support is not available, you can move the channels as you wish.

Press OK button to quit channel list and watch TV.

(*) LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel sequence.

Source Selection

Press the SOURCE button on the remote control for switching between the sources.

Information Banner

Whenever you change channel using the P-/P+ buttons or the numeric buttons, the TV displays the broadcast picture along with an information banner at the bottom of the screen. The information banner can be displayed at any time while watching TV by pressing the INFO button on the remote control (fig.5).

Hint: Not all channels broadcast the programme data. If the name and time of the programme are not available, then information banner will be displayed with blanks.

If the selected channel is locked, you must enter the correct four-digit numeric code to view the channel (default code is 0000). “Enter PIN” will be displayed on the screen in such a case.

(fig.1)

(fig.2)

(fig.3)

(fig.4)

(fig.5)

14	For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105