WMNB1012EW
Instruction manual
Washing Machine
WMNB1012EW
WMNB1012EB
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
2
You’ll soon be enjoying your new washing machine.
It all begins here, with your instructions. Don’t worry,
there’s nothing too technical coming up. Just simple,
step-by-step guidance to get you up and running
quickly. Sound good? Then let’s get started.
Help and Guidance
We’re here to help you get the most from your <washing machine>. Should you require
any guidance, a simple solution can often be found online at:
www.bush-support.com
If you still require further assistance, call one of our experts on 0345 257 7271.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
3
Contents
Product support
Troubleshooting 34-35
Error Signals 36
Technical Specifications 37
Help and assistance 38
Disposal 39
Guarantee 40
7
Safety information
Safety information 6
Getting to know your washing
machine
Ready? Let’s begin 10
Accessories 12
Installing your washing
machine
Installation requirements 14
Unpacking 14
Connections (electrical, water, gas) 15
Functions
Functions 18
Using your washing machine
First use of <washing machine> 26
Standard and advanced functions/use 27
Care and Maintenance
Cleaning 30
Maintenance actions 30
Technical specifications 31
1
2
3
4
5
6
1
Safety information
Safety information
Important - Please read these instructions fully before
installing or operating your washing machine
Safety information6
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Before use
• If the supply cord is damaged, it must be replaced
by the manufacturer, their service agent or similarly
qualified persons in order to avoid a hazard.
• The new hose-set supplied with the appliance are to
be used and that old hose-set should not be reused.
• This appliance can be used by children aged 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be done by children without
supervision.
• Children should be supervised to ensure that they do
not play with the appliance.
• Pull out its plug from the power socket before
cleaning or maintenance.
• Make sure that all pockets are emptied.
• Pull out its plug and cut off water supply after the
operation.
• Pets and children may climb into the machine. Check
the machine before every operation.
• Glass door may be very hot during the operation.
Keep children and pets far away from the machine
during the operation.
• Take care that power voltage and frequency shall be
identical to those of washing machine.
• Do not use any socket with rated current less than
that of washing machine. Never pull out the power
plug with wet hands.
• To ensure your safety, the power cord plug must
be inserted into an earthed three-pole socket. Check
carefully and make sure that your socket is properly
and reliably earthed.
• Packing materials may be dangerous to the children.
Please keep all packing materials (plastic bags, foams
etc) far away from the children.
• The installation of this appliance is best carried out by
2 people.
• Dispose of all packaging carefully and responsibly.
• This appliance is for indoor use only. Only install in a
dry indoor environment.
• The appliance MUST be positioned on a firm level
base.
• Do not position the appliance where it is exposed
to direct sunlight or heat sources as this will age the
plastic and rubber components.
• Ensure all 4 packing bolts have been removed.
• Ensure the appliance is connected directly to a
domestic mains water supply.
• Warning: This washing machine MUST only be
connected to a cold water supply.
• Ensure all electrical connections are as stated in this
document.
• Ensure the appliance is plugged into a separate
earthed socket that is easily accessible.
• Ensure the power lead is not trapped under the
appliance.
• Do not connect the appliance to the power supply
until installation is complete.
• This appliance is for domestic/household use only
and is not suitable for commercial use.
• Check that the water hose joints and connections are
secure and there are no leaks. If the hoses leak, do not
use them until the leaks have been stopped.
• Do not forget that the packing material of your
machine may be hazardous for children.
Safety information
Important - Please read these instructions fully before
installing or operating your washing machine
Safety information 7
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
During use
• Do not use a multiple socket or extension cord.
• Do not use if the power lead is damaged. It must be
replaced by the manufacturer, their approved service
agent or similarly qualified person. Customer Helpline:
0345 257 7271.
• Do not insert the plug into the power supply with wet
hands.
• Do not touch or use the appliance when barefoot or
with wet or damp hands.
• Do not open the detergent drawer during a wash
cycle.
• Do not touch the porthole (door) during the washing
cycle - it will get hot.
• Never force the machine door open while the
machine is running.
• Do not open the door if water is visible through the
porthole.
• Do not wash foam rubber or sponge like materials on
a hot wash.
• The machine can reach high temperatures while
running. Do not touch the drain hose or waste water
during draining.
• Keep your pet away from your machine.
• Do not use flammable detergent, sprays or dry
cleaning agents in or near to the appliance.
• Do not remove or insert the plug in the presence of
flammable gas.
• The appliance should not be put on a carpet which
can block the air ventilation on the bottom side.
• Do not place heavy objects or sources of heat or
damp on top of the washing machine.
• Only use detergents which are suitable for automatic
washing machines and follow the detergent
manufacturers recommendations.
• Do not use this appliance if there are any missing or
damaged parts.
• Do not attempt to repair the appliance yourself.
Contact the manufacturer, their approved service agent
or the Customer Helpline: 0345 257 7271.
Getting to know your washing
machine
2
Getting to know your washing machine
You’ll be up and running in no time
Getting to know your <washing machine>
10
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Ready? Let’s begin...
Please read these instructions carefully. They contain
important information which will help you get the
best from your washing machine and ensure safe and
correct installation and operation.
If you require any further assistance, our technical
experts are happy to help. For full details, refer to
the product support section at the end of these
instructions.
Getting to know your washing machine
You’ll be up and running in no time
Getting to know your <washing machine>
11
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
1. Detergent drawer
2. Top panel
3. Programme knob
4. Start/Pause button
5. Door
6. Filter
1
2 3 4 8 9
5
7
7 7
7
10
6
7. Packing bolt x 4
8. Power lead
9. Drain hose
10. Water inlet
Front Back
Getting to know your washing machine
You’ll be up and running in no time
Getting to know your <washing machine>
12
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Model Capacity Spin Speed Energy class
WMNB1012EW 10kg 1200rpm A+++
WMNB1012EB 10kg 1200rpm A+++
Accessories
This machine includes the below accessories, please
install these parts before operating.
• plastic hole plug x 4
• Inlet hose
Installing your washing
machine
3
Installing your washing machine
Bringing it all together
Installing your <washing machine>
14
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Unpacking your washing machine
Caution: 2 people are required to unpack the washing
machine, it is recommended that gloves are worn.
a: Carefully remove all packaging materials including
the foam base, dispose of correctly.
Note: When opened, water droplets may be visible in
the drum etc. this is normal as each appliance is factory
tested.
Removing the packing bolts
Important: The packing bolts are designed to support
the internal components during transit, these MUST be
removed before use.
a: Loosen the screws by rotating counter clockwise
with a suitable wrench. (1 & 2)
b: Remove the bolts by pulling them. (3)
c: When the transport bolts have been removed,
insert the plastic transport screw taps found in the
accessories bag into the holes. (4)
Adjusting the feet
a: For your machine to work efficiently with minimum
vibration it should be settled on flat, non-slippery, firm
ground.
b: You can adjust the balance of your machine by
changing the positioning of its feet.
c: First, loosen the plastic adjustment nut. (5)
d: Adjust by rotating the feet upwards or downwards.
(6)
e: After the desired position has been reached, tighten
the plastic adjustment nut again by rotating it upwards.
Note: Never put cartons, wooden blocks or similar
materials under the machine to balance irregularities
in the level of the ground.
X
4
X
4
1 2
X
4
3 4
5
6
X
4
Loading...