Welcome to Bowers & Wilkins and Formation Bar.
Thank you for choosing Bowers & Wilkins Formation. When John Bowers first established Bowers & Wilkins he did so in the belief that imaginative design, innovative engineering and advanced technology were keys that could unlock the enjoyment of audio in the home. That belief continues to inspire every product we design and in Formation has found its most advanced expression yet.
Formation Bar is a network connected, wireless active TV soundbar that provides extremely high performance reproduction of TV audio and Formation audio streams. Formation Bar is primarily intended to be configured and controlled using the Bowers & Wilkins Home app. The app is available for both iOS and Android devices. Some commonly used control functions are also available via touch buttons on the Formation Bar top panel and it is additionally able to learn and respond to TV remote control volume commands. It is only possible to install and configure a Formation Bar using the Bowers & Wilkins Home app.
Formation Bar will enable you to:
•Listen to audio from your TV.
•Listen to audio from streaming services like Spotify, Apple Music, and Roon.
•Listen to network stored audio files.
•Listen to audio over Bluetooth from appropriately enabled Bluetooth source devices.
•Listen to audio from devices such as turntables (via a phono preamp) and CD players that are connected to a Bowers & Wilkins Formation Audio.
•Listen to audio, such as Internet Radio, from Airplay or Bluetooth compatible services and apps.
•Listen to audio playing anywhere in your home on any Formation device connected to your home network.
The Bowers & Wilkins Home app is required to connect your Formation Bar to your home network and also to establish connection with other Formation
products in your home. The Bowers & Wilkins Home app and also provides some control and configurations functions during use. Before you begin your Formation
Bar installation please download and install the Bowers & Wilkins Home app on your iOS or Android device. The Bowers & Wilkins Home app requires iOS V11.4 or later, or Android V8.1 or later. Bluetooth, and WiFi services must be enabled on your iOS or Android device. You will also need to know your WiFi network password.
Note: Location Services must be enabled on Android devices during the Formation set up process. This is because Formation products use a low power form of Bluetooth (BT-LE) for service communication which on Android devices is only switched on when Location Services are enabled. Bowers & Wilkins do not use any location services data for marketing purposes.
ENGLISH
Software version - V1.4 |
www.bowerswilkins.com |
2
Loading...