English
CCM6
Thank you for choosing Bowers & Wilkins. When John Bowers first established our company he did so in the belief that imaginative design, innovative engineering and advanced technology were keys that could unlock the enjoyment of audio in the home. His belief is one that we continue to share and it inspires every product we design.
The CCM6 Series of ceiling mount speakers is designed to offer easy installation and high quality audio reproduction for discrete custom install applications. This manual describes the installation of CCM6 Series speakers within conventional stud and sheetrock (joist and plasterboard) ceilings. It begins by listing the contents of the CCM6 series carton.
www.bowers-wilkins.com
2
1
1
1
1
•CCM6 Series speaker assembly (baffle, frame and bezel, grille)
•Cut-out template
•Paint mask
•Document pack containing Quick Start Guide and Warranty information
Environmental Information
All Bowers & Wilkins products are designed to comply with international
directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical
and Electronic Equipment (WEEE). These symbols indicate compliance and that the products must be appropriately recycled or processed in accordance with these directives. Consult your local waste disposal authority for guidance.
CCM662, CCM663, CCM664,
CCM665, CCM663SR, CCM664SR
Ø 202mm (8in)
202mm (8in)
<![if ! IE]><![endif]>133mm (5.2in)
CCM6 Series ceiling mount speakers comprise a baffle carrying the speaker drivers and crossover, a mounting frame (with integrated bezel), and a magnetically secured grille. The frame is connected
via side mounted terminals to the speaker cables, with the baffle connecting automatically as it is inserted in the frame.
Note: A square grille is optionally available for CCM6 Series speakers. Contact your local Bowers & Wilkins retailer for more information.
CCM6 Series speakers require ceiling aperture dimensions described in the following table:
Model |
Aperture Diameter |
CCM662 |
202mm (8 in) |
CCM663 |
202mm (8 in) |
CCM664 |
202mm (8 in) |
CCM665 |
202mm (8 in) |
CCM663SR |
202mm (8 in) |
CCM664SR |
202mm (8 in) |
CCM682 |
251mm (9.9 in) |
CCM683 |
251mm (9.9 in) |
CCM684 |
251mm (9.9 in) |
CCM682, CCM683, CCM684
Ø 251mm (9.9in)
251mm (9.9in)
<![if ! IE]><![endif]>133mm (5.2in)
All CCM6 Series speakers require clear depth behind the sheetrock (plasterboard) of 140mm (5.51 in). The diagrams above illustrate these dimensions.
Note: If CCM6 Series speakers are to be installed in “new build” projects, pre-mount kits and back boxes are available. Contact your local Bowers & Wilkins retailer for more information.
Before installing CCM6 Series speakers you should ensure that the ceiling locations chosen are free of obstructions such as pipe work, ducting or wiring that will interfere with the installation. In existing dry-wall construction, use a stud-finding tool to help you map the ceiling construction and a pipe detector to scan the proposed installation locations.
3