Bosch W-STR, W-STW Specsheet

0 (0)
Bosch W-STR, W-STW Specsheet

Fire Alarm Systems | W ST Wall mount Multi candela Strobes

W ST Wall mount Multi candela Strobes

www.boschsecurity.com

u Sleek modern aesthetics

u Multiple voltages (12 VDC or 24 VDC) u Voltage test points

u Eight strobe candela options u Universal mounting base

The Cooper Wheelock Exceder Series Strobes feature a sleek modern design that incorporates high reliability and high-efficiency optics to minimize current draw. The reduced current draw allows for a greater number of devices on the two wire notification appliance circuit. This, in combination with eight candela options in one appliance, no tools needed for changing settings, voltage test points, 12 V or 24 V DC operation, the universal mounting base, and multiple mounting options results in a reduced cost of ownership.

These strobes provide eight candela settings. All the switches to change these settings can be set without a tool and are located behind the appliance to prevent tampering.

The separate universal mounting base can be easily mounted to five industry standard back box types. They can also be pre wired to allow full testing of the circuit wiring before the appliance is installed and the surface finished. These wall mounting strobes also feature voltage test points for taking readings with a volt meter for troubleshooting or AHJ inspection.

Certifications and approvals

Cooper Wheelock holds these Listings and Approvals:

Region

Certification

 

 

 

USA

UL

UUKC: Signaling Appliances and Equip-

 

 

ment for the Hearing Impaired (ANSI/UL

 

 

1971), UVAV: Visual-signal Appliances

 

 

for Fire-protective Signaling Systems

 

 

(ANSI/UL 1638)

 

CSFM

see our website

 

 

 

Installation/configuration notes

Compatibility

Strobe:

These strobes provide a non-synchronized strobe appliance when connected directly to a Fire Alarm Control Panel (FACP), or provide a synchronized strobe appliance when used in conjunction with an FACP that incorporates the Cooper Notification sync protocol, a Cooper Notification Sync Module, or the Cooper Notification Power Supply. They are designed to flash at 1 flash per second minimum over their Regulated Voltage Range.

Loading...
+ 2 hidden pages