Bosch B465-MR-1640, B10R Installation Manual
2 | Specifications
Dimensions 37 cm x 32 cm x 8.9 cm (14.5 in x 12.5 in x 3.5 in)
Color
Compatible Lockset
(optional)
Compatible Tamper
Switch (optional)
Material 1.0 mm (20 gauge) cold-rolled steel
Red
D101 Lock and Key Set
ICP-EZTS Tamper Switch
D110 Tamper Switch
Medium Control Panel Enclosure
B10R
en Installation Guide
Copyright
This document is the intellectual property of Bosch Security Systems, Inc. and is protected by
copyright. All rights reserved.
Trademarks
All hardware and software product names used in this document are likely to be registered
trademarks and must be treated accordingly.
Bosch Security Systems, Inc. product manufacturing dates
Use the serial number located on the product label and refer to the Bosch Security Systems, Inc.
website at http://www.boschsecurity.com/datecodes/.
© 2015 Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, NY 14450
1 | Overview
The B10R Medium Control Panel Enclosure houses select Bosch control panels and modules. The enclosures are compatible with an optional enclosure
tamper switch and optional lock and key set, optional transformer, or hold two batteries.
1
10
Figure 1.1: B10R Medium Control Panel Enclosure overview
2
3
7
4
4
5
5
6
4
7
8
9
6
4
7
4
Callout Description
1
2
3
4
5
6
7 B46 module knockout location
8 Module mounting clip locations
9 Tamper switch mounting location
10 Lockset mounting location
© 2015 Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, NY 14450 F.01U.312.124 | 03 | 2015.07 | 2
Cover knockout (optional)
Grounding (bonding) connection to enclosure door
Do not connect any other wires to this lug. Grounding (bonding) connection for door only.
Conduit knockouts (6) 4 - 12.7mm (1/2in), 2 - 19.05mm (3/4 in)
Enclosure mounting holes (4). Bosch recommends using #10 screws and appropriate wall anchors to secure the enclosure base to the wall.
Rear wire knockouts (4)
Loading...