Performances
Mercure 4 : 20 divisions
Aluminium rectangular bowlBowl volume: 27 litres
Dough capacity mini. : 3 kgDough capacity maxi. : 18 kg
The advantages
Precise cutting
Large choice of grids
Equipped with a device against flour projection
Comfort:
-Ergonomic control panel
-Very silent (<65db)
-Stop & Go TechnologyEasy cleaning:
-Automatic lifting of the cutters
-3 removable stainless steel (no tool necessary)
-Smooth surfaces, stainless steel frame
-Aluminium bowl
Light, easy to move machine Modular machine that can be fitted with a grid and grid frame afterwards
Perfect finishing
The security of the machine has been audit by an independent organism
Machine complies with 
standard
Mercure 4
Hydraulic divider with rectangular bowl
Use
The Mercure 4 hydraulic divider is |
designed to di vide a previously weighed dough chunk i nto |
equal dough pieces. It also gives the |
opportunity to divide a dough with a rate of moisture up to |
70% or with some ingredients. The shape of the bowl has been specially designed to guarantee even distribution of the dough and a regular weight of the dough pieces.
Operating principle
Division with cutters :
Once weighted, the dough is placed in the divider bowl. Once the lid is closed, the user activates a button which lifts a tray consisting of pushers in order to equalise the dough. Then, double milling blades on the bottom of the bowl lift to divide the dough into equal weight pieces. Once the dough has been cut, the tray moves back up to allow easy grasp of the dough pieces.
Division with the grid:
In option, the hydraulic divider Mercure 4 may be equipped with a grid frame and a grid (8 grids available). Before using, the plastic board has to be p laced above the pushers in order to avo id the cutters lifting. Once the dough is smoothed, the lid can be opened and the grid frame locked on the bowl. As the plastic board is lifting, the dough goes through the grid which acts like cutter. The dough pieces are formed.
Rising of cutters for a careful cleaning
The divider comes with a blade rising system for easy cleaning: just lower the tray to the bottom of the bowl and keep pressing the « down » button so that the cutters of the divider come out.
Construction
Double milled knife for a perfect cut
Control panel : two electromechanical buttonsSilent hydraulic unit
« stop & go » system: the hydraulic system automatically stops when it is not used.Bowl edge machined to incorporate vents to allow air to escape
Aluminium grid frame and 3mm stainless steel grids (optional)3 removable stainless steel covers (side and rear)
Lid and grid locked by drop-forged cam
Mechanically welded frame coated in stainless steel
2 multi-directional castors with brakes and 2 mono-directional rear wheels for manoeuvrabilityBowl and outer bowl rim in aluminium
Cover in ABS , highly shock resistantFood grade single piece pusher
Handgrip in stainless steel
Trip switch with low power cut-out
Flour dust catch tray for everyday useSupply voltage: 400 V 3 PH + N 50 HZ
Bongard reserves the right to alter the characteristics of the models without prior notice - 05/2014
Loading...