|
|
|
|
|
|
|
|
s |
|
|
|
|
|
|
|
|
|
e |
|
|
|
|
|
|
|
|
ic |
|
|
|
||
|
|
|
|
d |
|
|
|
|
|
|
|
|
|
n |
|
|
|
|
|
|
|
|
|
e |
|
|
|
|
|
|
|
|
|
p |
|
|
|
|
|
|
|
|
|
p |
|
|
|
|
|
|
s |
|
||
A |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
lan |
|
|
|||
|
|
d |
p |
|
|
|
|
e |
||
an |
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
l |
||||
|
|
|
|
|
|
|
|
b |
|
|
|
|
|
|
|
|
la |
|
|
||
|
|
|
|
|
ai |
|
|
|
||
|
|
|
|
v |
|
|
|
|
t |
|
|
ea |
|
|
|
|
|
||||
ar |
|
|
|
|
|
|
|
e |
||
|
|
|
|
|
|
n |
|
|||
|
|
|
|
|
|
|
a |
|
|
|
|
|
|
|
|
|
r |
|
|
|
|
|
|
|
|
|
t |
|
|
|
|
|
|
|
|
|
x |
|
|
|
|
|
|
|
ne |
|
|
|
|
|
|
|||
o |
|
|
|
|
|
|
|
|
|
Performances
Fermentation chamber for racks 400/460x800, 600x800, 700x900, 750 x 900 depending on model up to 800 x 1000 mm
Cells are defined by their internal width (800, 1000, 1200, etc...) they can be installed side by side
Door handle on the left unless otherwise specified
The advantages
Custom made product
Easy to assemble panels by means of excentric hooks
Electromechanical regulationElectromechanical hygrostatMaximum proofing
temperature : 30°C –38°C
According to standards
BFE
Roll-In Final proofer
Use
The BFE proofer is used to reach a set temperature (30°C-38°C) very rapidly. It is used for fast proofing of baking and pastry products.
Operating principle
A technical unit (ventilation, heat production and humidity production) placed inside the enclosure warms the air to a set temperature defined by the user (30°C-38°C). An electromechanical hygrostat regulates the humidity rate from 30% to 90%. Ventilators maintain an even temperature and humidity at all times throughout the proofer.
Construction
60 mm thick isothermal Panels.
Made of modular panels assembled by eccentric hooks
The panels are injected with polyurethane foam, of a density of 40 kg / m3
Sheet metal coating, inside aluminium of 8/10 thickness pre-lacquered, painted and coated with a protective polyethylene covering
Plain doors (same material as panels with single or/and double door)
The wall panels are fitted into a base frame made of PVC of 30 mm height fixed to the floorInside lighting
Connecting power : 400 V (3 PH + N + Gr) 50 Hz
Options
Electronic pin type humidity sensor (only with electronic regulation Opticom)Insulated floor with stainless steel ramp
Stainless steel interior and isothermal hot electro-plated zinc exterior panels, pre-lacquered, painted and coated with a protective polyethylene covering
Stainless steel (5/10) interior and exterior
Important remarks
BFE’s are supplied without rack.
|
|
|
101 |
Bongard reserves the right to alter the characteristics of the models without prior notice - 12/2011 |
|
|
||
|
|
|