Beko WUE 6512 BA User Manual

Washing Machine

User’s Manual

Masina de spalat automata

Manual de utilizare

Plně automatická pračka

Uživatel Manuální

WUE 6512 BA

EN/RO/CZ

Document Number:1911861358_EN/ 18-08-20.(14:22)

This product was manufactured using the latest technology in environmentally friendly conditions.

1 General safety instructions

This section includes security instructions which may help prevent the injuries and material damage risks. All kinds of warranties shall be invalid if these instructions are not observed.

1.1Life and property safety

Never place the product on a carpet-covered floor. Electrical parts will get overheated since air cannot circulate from under the device. This will cause problems with your product.

Unplug the product if it is not in use.

Always have the repairing procedures carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.

The water supply and draining hoses must be securely fastened and remain undamaged. Otherwise, water leak may occur.

While there is still water inside the product, never open the loading door or remove the filter. Otherwise, risk of flooding and injury from hot water will occur.

Do not force open the locked loading door. Door can be opened a few minutes after the washing cycle ends. In case of forcing the loading door to open, the door and the lock mechanism may get damaged.

Use detergents, softeners and supplements suitable for automatic washing machines only.

Follow the instructions on the label of textiles and the detergent package.

1.2Children's safety

This product can be used by the children who are at the age of 8 and over and the people whose physical, sensory or mental skills are not fully developed or who do not have necessary required experience and knowledge as long as they are supervised or trained about the safe use of the product and its risks. Children should not play with the device. Cleaning and maintenance works should not be performed by children unless they are supervised by someone. Children of less than 3 years should be kept away unless continuously supervised.

Packaging materials may be dangerous for the children. Keep packaging materials in a safe place away from reach of the children.

Electrical products are dangerous for the children. Keep the children away from the product when it is in use. Do not allow them to play with the product.

Washing Machine / User’s Manual

3 EN

Use child lock to prevent children from intervening with the product.

Do not forget to close the loading door when leaving the room where the product is located.

store all detergents and additives in a safe place away from the reach of the children by closing the cover of the detergent container or sealing the detergent package.

1.3Electrical safety

If the product has a failure, it should not be operated unless it is repaired by the Authorized Service Agent. Risk of electric shock!

This product is designed to resume operating in the event of powering on after a power interruption. If you wish to cancel the programme, see "Cancelling the programme" section.

Plug the product into a grounded outlet protected by a 13 A fuse. Do not neglect to have the grounding installation made by a qualified electrician. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

Do not wash the product by spraying or pouring water onto it! Risk of electric shock!

Never touch the power cable plug with wet hands! Do not grab the power cord to unplug the machine, always unplug it by holding the socket with one hand, and pulling the plug with the other hand.

Product should be unplugged during installation, maintenance, cleaning and repair procedures.

If the power cable is damaged, it must be replaced by the manufacturer, after sales service or a similarly qualified person (preferably an electrician) or someone designated by the importer in order to avoid possible risks.

1.4Hot surface safety

While washing the laundry at high temperatures, the loading door glass will get hot. Considering this fact, during washing operation keep the children away from the loading door of the product to prevent them touching it.

4 / EN

Washing Machine / User’s Manual

2Important instructions for environment

2.1 Compliance with the WEEE Directive and Disposing of the Waste Product:

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).

This symbol indicates that this product shall not be disposed with other household wastes at

the end of its service life. Used device must be returned to offical collection point for recycling

of electrical and electronic devices. To find these collection systems please contact to your local authorities or retailer where the product was puchased. Each household performs important role in recovering and recycling of old appliance. Appropriate disposal of used appliance helps

prevent potential negative consequences for the environment and human health.

Compliance with RoHS Directive

The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive..

2.2 Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points des-

ignated by the local authorities.

3Intended use

•This product has been designed for domestic use. It is not for commercial purposes or it should not be used out of its intended use.

•The product must only be used for washing and rinsing of laundry that are marked accordingly.

•The manufacturer waives any responsibility arisen from incorrect usage or transportation.

Washing Machine / User’s Manual

5 EN

4Technical specifications

Complying Commission Delegated Regulation (EU) No 1061/2010

Supplier name or trademark

Beko

Model name

WUE 6512 BA

7000040069

Height (cm)

84

Width (cm)

60

Depth (cm)

44

Net weight (±4 kg.)

55

Single Water inlet / Double Water inlet

• / -

• Available

Electrical input (V/Hz)

230 V / 50Hz

Total current (A)

10

Total power (W)

1550

Main model code

9213

C

BEKO

MODEL IDENTIFIER

(*)

A

A

The model information as stored in the product database can be reached by entering following website and searching for your model identifier (*) foundon energy label: https://eprel.ec.europa.eu/

6 / EN

Washing Machine / User’s Manual

4.1Installation

•Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's responsibility.

•Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.

•Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.

4.1.1Appropriate installation location

•Place the product on a hard and level floor. Do not put it onto a carpet with high pile or other similar surfaces.

•When the washing machine and dryer are placed on top of each other, their total weight –when loaded– amounts to 180 kilograms. Place the product on a solid and flat floor that has sufficient load carrying capacity!

•Do not place the product on the power cable.

•Do not install the product in the environments where the temperature falls below 0 ºC.

•Leaving a gap at the sides of the machine is suggested to reduce vibration and noise

•On a graduated floor, do not place the product next to the edge or on a platform.

•Do not place heat sources such as Hobs, Irons, Ovens, etc. on the washing machine and do not use them on the product.

4.1.2Removing packaging reinforcement (If the product has)

Tilt the machine backwards to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. Do not make this operation alone by yourself.

4.1.3 Removing the transportation locks

1 Loosen all bolts with an appropriate wrench until they turn freely.

2Remove the transport safety bolts by turning them slightly.

3Insert the plastic covers in the bag containing the user manual to the openings on the rear panel.

A CAUTION: Remove the transportation safety bolts before operating the washing machine! Otherwise, the product will be damaged.

C Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future.

Install the transport safety bolts in reverse order of the disassembly procedure.

Never move the product without the transportation safety bolts properly fixed in place!

Washing Machine / User’s Manual

7 EN

4.1.4 Connecting water supply

CThe water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1 MPa). It is necessary to have

10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure is higher.

ACAUTION: Models with a single water inlet should not be connected to the hot water tap. In such a case the laundry willget damaged or the product will switch to protection mode and will not operate.

CAUTION: Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry.

1Tighten the nuts of the hose by hand. Never use a tool when

tightening the nuts.

2When hose connection is completed, check whether there is leak

problems at the connection points by opening the taps fully. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. In order to prevent the water leaks and resultant damages, keep the taps closed when you do not use the product.

4.1.5Connecting the drain hose to the drain

•Attach the end of the drain hose directly to waste water drain, lavatory or bathtub.

A CAUTION: Your drain house will be flooded if the hose comes out of its housing during water discharge. Moreover, there is risk of scalding due to high washing temperatures! In order to prevent such situations and make sure that the machine performs water intake and discharge processes without any problem, fix the drain hose securely.

• Connect the drain hose to a minimum height of 40 cm and a maximum height of 100 cm.

• In case the drain hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure.

•To prevent the waste water to go back into the machine again and to ensure easy drainage, do not immerse the end of the hose into the waste water or do not insert it into the drain for more than 15 cm. If it is too long, cut it short.

•The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the machine.

•If the length of the hose is too short, use it by adding an original extension hose. Length of the hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.

4.1.6Adjusting the feet

ACAUTION: In order to ensure that the product operates more silently and vibration-free, it must stand level and balancedon its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushingand vibration problems.

CAUTION: Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.

8 / EN

Washing Machine / User’s Manual

1Loosen the lock nuts on the feet by hand.

2Adjust the feet until the product stands in a stable and balanced way.

3.Tighten all lock nuts by hand again.

4.1.7 Electrical connection

Connect the product to a grounded outlet protected by a 16 A fuse. The Manufacturer shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

•Connection must comply with national regulations.

•The wiring for the electrical outlet circuit must be sufficient to meet the appliance requirements. Use of a Groud Fault Circuit Interrupter (GFCI) is recommended.

•Power cable plug must be within easy reach after installation.

•If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16 Amp fuse.

•The voltage specified in the "Technical specifications" section must be equal to your mains voltage.

•Do not make connections via extension cables or multi-plugs.

BCAUTION: Damaged power cables must be replaced by the Authorised Service Agents.

4.1.8Initial use

Before starting to use the product make sure that the preparations are made which are in line with the “Important Safety and Environment Instructions” and the instructions in the “Installation” section.

To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If this program is not available in your machine, apply the method which is described in the section 4.4.2.

CUse an anti-limescale suitable for the washing machines.

Some water might have remained in the product due to the quality control processes in the production. It is not harmful for the product.

Washing Machine / User’s Manual

9 EN

4.2 Preparation

4.2.1Sorting the laundry

* Sort laundry according to type of fabric, color, and degree of soiling and allowable water temperature. * Always obey the instructions given on the garment tags.

4.2.2Preparing laundry for washing

•Laundry items with metal attachments such as, underwired bras, belt buckles or metal buttons will damage the machine. Remove the metal pieces or wash the clothes by putting them in a laundry bag or pillow case.

•Take out all substances in the pockets such as coins, pens and paper clips, and turn pockets inside out and brush. Such objects may damage the product or cause noise problem.

•Put small size clothes such as infant's socks and nylon stockings in a laundry bag or pillow case.

•Place curtains in without compressing them. Remove curtain attachment items.

•Fasten zippers, sew loose buttons and mend rips and tears.

•Wash “machine washable” or “hand washable” labeled products only with an appropriate programme.

•Do not wash colours and whites together. New, dark coloured cottons release a lot of dye. Wash them separately.

•Tough stains must be treated properly before washing. If unsure, check with a dry cleaner.

•Only use the dyes / color changers and descaling agents which are appropriate to machine wash. Always follow the instructions on the package.

•Wash trousers and delicate laundry turned inside out.

•Keep laundry items made of Angora wool in the freezer for a few hours before washing. This will reduce pilling.

•Laundry that are subjected to materials such as flour, lime dust, milk powder, etc. intensely must be shaken off before placing into the machine. Such dusts and powders on the laundry may build up on the inner parts of the machine in time and can cause damage.

4.2.3Tips for energy and water saving

Following information will help you use the product in an ecological and energy/water-efficient manner.

•Operate the product in the highest load capacity allowed for the programme you have selected, but do not overload. See, “Programme and consumption table”.

•Observe the temperature instructions on the detergent packaging.

•Wash slightly soiled laundry at low temperatures.

•Use faster programmes for small quantities of lightly soiled laundry.

•Do not use prewash and high temperatures for laundry that is not heavily soiled or stained.

•If you plan to dry your laundry in a dryer, select the highest spin speed recommended during washing process.

•Do not use more detergent than the recommended on the detergent packaging.

4.2.4Loading the laundry

1.Open the laundry cover.

2.Put the laundry items into the machine in a loose manner.

3.Push and close the loading cover until you hear the locking sound. Ensure that no items are caught in the door. The loading door is locked while a programme is running. The door can only be opened a while after the programme comes to an end.

4.2.5Correct load capacity

The maximum load capacity depends on the type of laundry, the degree of soiling and the washing programme desired.

Machine automatically adjusts the water amount according to the weight of the laundry put inside it.

AWARNING: Follow the information in the “Programme and consumption table”. When overloaded, machine's washingperformance will drop. Moreover, noise and vibration problems may occur.

10 / EN

Washing Machine / User’s Manual

4.2.6 Using detergent and softener

CWhen using detergent, softener, starch, fabric dye, bleacher and decolorant, descaling agents; read the manufacturer's instructions written on the package and follow the dosages specified. Use measuring cup if available.

2 3 1

The detergent drawer is composed of three compartments:

– (1) for prewash

– (2) for main wash

– (3) for softener

– () in addition, there is a siphon piece in the softener compartment.

Detergent, softener and other cleaning agents

•Add detergent and softener before starting the washing programme.

•While the washing cycle is in progress, do not leave the detergent dispenser open!

•When using a programme without prewash, do not put any detergent into the prewash compartment (compartment nr. "1").

•In a programme with prewash, do not put liquid detergent into the prewash compartment (compartment nr. "1").

•Do not select a programme with prewash if you are using a detergent bag or dispensing ball. Place the detergent bag or the dispensing ball directly among the laundry in the machine.

If you are using liquid detergent, do not forget to place the liquid detergent container into the main wash compartment (compartment number “2”).

Choosing the detergent type

Detergent type to be used depends on the washing programme, fabric type and color.

•Use different detergents for coloured and white laundry.

•Wash your delicate clothes only with special detergents (liquid detergent, wool shampoo, etc.) intended solely for delicate clothes and at suggested programmes.

•When washing dark coloured clothes and quilts, it is recommended to use liquid detergent.

•Wash woolens at suggested programme with special detergent made specifically for woolens

•Please review the program descriptions part for suggested program for different textiles.

•All recommendations about detergents are valid for selectable temperature range of programmes.

ACAUTION: Use only detergents manufactured specifically for washing machines.

CAUTION: Do not use soap powder.

Adjusting detergent amount

The amount of washing detergent to be used depends on the amount of laundry, the degree of soiling and water hardness.

•Do not use amounts exceeding the dosage quantities recommended on the detergent package to avoid problems of excessive foam, poor rinsing, financial savings and finally, environmental protection.

•Use lesser detergent for small amounts or lightly soiled clothes.

Using softeners

Pour the softener into the softener compartment of the detergent drawer.

•Do not exceed the (>max<) level sign on the softener compartment.

•If the softener has lost its fluidity, dilute it with water before putting it in the detergent drawer.

Washing Machine / User’s Manual

11 EN

Using liquid detergents

If the product contains a liquid detergent cup:

2

•Put the liquid detergent container into the compartment no “2”.

•If the liquid detergent lost its fluidity, dilute it with water before putting it into the detergent container.

If the product is equipped with a liquid detergent part:

• When you want to use liquid detergent, press on the point shown to rotate the apparatus. The part that falls off will function as a barrier for the liquid detergent.

• If required, clean the apparatus with water when it is in place or by removing it.

• If you will use powder detergent, the apparatus must be secured at top position.

If the product does not contain a liquid detergent cup:

•Do not use liquid detergent for the prewash in a programme with prewash.

•Liquid detergent stains your clothes when used with Delayed Start function. If you are going to use the Delayed Start function, do not use liquid detergent.

Using gel and tablet detergent

•If the gel detergent thickness is fluidal and your machine does not contain a special liquid detergent cup, put the gel detergent into the main wash detergent compartment during first water intake. If your machine contains a liquid detergent cup, fill the detergent into this cup before starting the programme.

•If the gel detergent thickness is not fluidal or in the shape of capsule liquid tablet, put it directly into the drum before washing.

•Put tablet detergents into the main wash compartment (compartment nr. "2") or directly into the drum before washing.

Using starch

•Put the liquid soda, powder soda or the fabric dye into the softener compartment. Do not use softener and starch together in a washing cycle.

Wipe the inside of the machine with a damp and clean cloth after using starch.

Using limescale remover

•When required, use limescale removers manufactured specifically for washing machines only.

Using bleaches

•Add the bleach at the beginning of the washing cycle by selecting a prewash program. Do not put detergent in the prewash compartment. As an alternative application, select a programme with extra rinse and add the bleaching agent while the machine is taking water from the detergent compartment during first rinsing step.

•Do not use bleaching agent and detergent by mixing them.

•Use just a little amount (approx. 50 ml) of bleaching agent and rinse the clothes very well as it causes skin irritation. Do not pour the bleach onto the laundry and do not use it with the colored items.

•When using oxygen-based decolorant, select a program which washes the laundry at a low temperature.

•Oxygen-based decolorant can be used with the detergent; however, if it is not at the same consistence, first put detergent in the compartment number “2” in the detergent dispenser and wait for the machine to flush the detergent when taking in water. While the machine continues taking in water, add decolorant in the same compartment.

12 / EN

Washing Machine / User’s Manual

4.2.7 Tips for efficient washing

Soiling Level

						Clothes
	Light Colours and				Colours			Black/Dark	Delicates/
			Whites					Colours	Woolens/Silks
	(Recommended temperature			(Recommended temperature				(Recommended	(Recommended
	range based on soiling level:			range based on soiling level:				temperature range	temperature range
		o			o			based on soiling	based on soiling
	40-90		C)	cold -40		C)		level: cold -40 oC)	level: cold -30 oC)
	It may be necessary to pre-treat			Powder and liquid
				detergents recommended
Heavily	the stains or perform prewash.
				for colors can be used at				Liquid detergents	Prefer liquid
Soiled	Powder and liquid detergents			dosages recommended				suitable for colors	detergents produced
	recommended for whites can be
				for heavily soiled clothes.				and dark colors can	for delicate clothes.
	used at dosages recommended
(difficult stains				It is recommended to use				be used at dosages	Woolen and silk
	for heavily soiled clothes. It is
				powder detergents to clean				recommended	clothes must be
such as grass,	recommended to use powder
				clay and soil stains and the				for heavily soiled	washed with special
coffee, fruits and	detergents to clean clay and soil
				stains that are sensitive to				clothes.	woolen detergents.
blood.)	stains and the stains that are
				bleaches. Use detergents
	sensitive to bleaches.
				without bleach.
Normally	Powder and liquid			Powder and liquid detergents				Liquid detergents	Prefer liquid detergents
Soiled				recommended for colors can be				suitable for colors	produced for delicate
	detergents recommended							and dark colors can
(For example,	for whites can be used at			used at dosages recommended				be used at dosages	clothes. Woolen and silk
stains caused by	dosages recommended for			for normally soiled clothes.				recommended for	clothes must be washed
body on collars	normally soiled clothes.			Detergents which do not contain				normally soiled	with special woolen
and cuffs)				bleach should be used.				clothes.	detergents.
				Powder and liquid					Prefer liquid detergents
Lightly Soiled	Powder and liquid			detergents recommended				Liquid detergents
				for colors can be used at				suitable for colors	produced for delicate
	detergents recommended			dosages recommended				and dark colors can	clothes. Woolen and silk
	for whites can be used at
(No visible stains				for lightly soiled clothes.				be used at dosages	clothes must be washed
	dosages recommended for
exist.)	lightly soiled clothes.			Detergents which do not				recommended for	with special woolen
				contain bleach should be				lightly soiled clothes.	detergents.
				used.

Symbols Table

Prewash

Fast

Fast+

Extra

Extra

Anti

Pet Hair

Steam

Night

Soaking

Rinse

Steeping

AutoDose

Liquid

Softener

Rinse

Water

Crease

Removal

Modu

Hold

Detergent

Selection

Selection

Rinse

Spin+Drain

Drain

Temperature

Spin

No

Tap

No

Time

Door

Child

On/Off

Start /

Soil Level

Add

Downloaded

Spin

Water

Water

Delay

Lock

Lock

Pause

Garment

Program

(Cold)

Wash

Ok

Cancel

AntiCrease+

Drying

Extra

Cupboard

Iron

Timed

(End)

Dry

Dry

Dry

Drying

Washing Machine / User’s Manual

13 EN

4.3 Operating the product

4.3.1 Control panel

1	- Programme Selection Knob (Uppermost position On	6	- Auxiliary Function Button 3
/ Off)		7	- Auxiliary Function Button 2
2	- Display	8	- Auxiliary Function Button 1
3	- End Time Adjustment Button	9	- Spin Speed Adjustment Button
4	- Programme Follow-up Indicator	10 - Temperature Adjustment Button
5	- Start/Pause Button

4.3.2Preparing the machine

1.Make sure that the hoses are connected tightly.

2.Plug in your machine.

3.Turn the tap on completely.

4.Place the laundry in the machine.

5.Add detergent and fabric softener.

4.3.3Programme selection and tips for efficient washing

1.Select the programme suitable for the type, quantity and soiling degree of the laundry in accordance with the "Programme and consumption table" and the temperature table below.

2.Use the Programme Selection knob to select the desired programme.

14 / EN

Washing Machine / User’s Manual

4.3.4 Programme and consumption table

	EN	25				Auxiliary functions
			(kg)LoadMax.	ConsumptionWater(l)	ConsumptionEnergy(kWh)	SpeedMax.	Prewash	Fast+	rinseExtra	Crease+-Anti	Selectable
	Programme										temperature
											range °C
		90	6	83	1,950	1000	•	•	•	•	Cold - 90
	Cottons	60	6	83	1,800	1000	•	•	•	•	Cold-90
		40	6	81	0,950	1000	•	•	•	•	Cold-90
		40 ***	6	45,0	1,020	1000					40-60
	Eco 40-60
		40 **,***	3	31,0	0,560	1000					40-60
		40 ***	1,5	24,0	0,410	1000					40-60
	Synthetics	60	2,5	68	1,150	1000	•	•	•	•	Cold-60
		40	2,5	66	0,750	1000	•	•	•	•	Cold-60
		90	6	62	1,800	1000		•	•	•	Cold-90
	Xpress / Super Short	60	6	62	0,900	1000		•	•	•	Cold-90
		30	6	60	0,200	1000		•	•	•	Cold-90
	Xpress / Super Short + Fast	30	2	60	0,150	1000		•	•	•	Cold-90
	Mix 40	40	3	70	0,800	800	•	•		•	Cold-40
	Woollens / Hand Wash	40	1,5	45	0,450	1000			•		Cold-40
	Gentlecare	30	2	48	0,650	800			•		Cold-40
		60 **	6	47,5	0,730	1000					40-60
	Classic	60 **	3	35,0	0,615	1000					40-60
		40 **	3	33,0	0,610	1000					40-60
	Dark Care/Jeans	40	2	70	0,750	1000	•	•	*	•	Cold-40
	Outdoor/Sports	40	2,5	44	0,450	1000	•				Cold-40
	Lingerie	30	1	52	0,250	600	•	•	•	•	Cold-30
	Hygiene + Steam	90	6	99	2,300	1000			•		20-90
	Down Wear + Steam	60	1,5	85	0,800	1000			•		Cold-60
	Shirts + Steam	60	2,5	42	0,600	800	•	•	•	•	Cold-60
	Drum Clean + Steam	90	-	67	2,100	600					90

• : Selectable

* : Automatically selected, cannot be cancelled.

**: Eco 40-60 ( ) is the test programme in accordance with EN 60456:2016 and energy label with Commission Delegated Regulation (EU) 1061/2010)

**: Classic ( ) is the test program in accordance with EN 60456:2016 and energy label

with Commission Delegated Regulation (EU) 1061/2010

***: Eco 40-60 with 40 °C temperature selection is the test programme in accordance with EN 60456:2016/prA:2019 and energy label with Commission Delegated Regulation (EU) 2019/2014

- : See the programme description for maximum load.

Washing Machine / User’s Manual

15 EN

CINFORMATION

•Water and power consumption may vary subject to the changes in water pressure, water hardness and water temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in the mains voltage.

•When selecting a programme, you can see the washing duration on the display of your machine. Depending on the amount of laundry you have loaded into the machine, there might be a difference of 1 to 1.5 hours between the duration shown on the display and the actual duration of the washing programme. The duration will be corrected automatically right after the washing programme has started.

•The auxiliary functions in the table may vary according to the model of your machine.

•Auxiliary function selection modes can be changed by the manufacturing company. Existing selection modes can be removed or new selection modes can be added.

•Always select the lowest appropriate temperature. The most efficient programmes in terms of energy consumption are generally those that perform at lower temperatures and longer duration.

•Noise and remaining moisture content are influenced by the spinning speed: the higher the spinning speed in the spinning phase, the higher the noise and the lower the remaining moisture content.

Consumption Values (EN)

	Temperature selection (°C)	Spin Speed (rpm)	Capacity (kg)	Program Duration (hh:mm)	Energy Consumption(kWh/ cycle)	Water Consumption(L/ cycle)	Laundry Temperature (°C)	Remaining Moisture Content (%)
Eco 40-60	40	1000	6,0	03:17	1,020	45,0	40	61
	40	1000	3	02:35	0,560	31,0	30	61
	40	1000	1,5	02:35	0,410	24,0	26	66
Cottons	20	1000	6	03:25	0,500	81	20	62
Cottons	60	1000	6	03:25	1,800	83	60	62
Synthetics	40	1000	2,5	02:15	0,750	66	40	45
Express / Super Xpress	30	1000	6	00:28	0,200	60	23	62

16 / EN

Washing Machine / User’s Manual

4.3.5 Main programmes

Depending on the type of fabric, use the following main programmes.

• Cottons

You can wash your durable cotton laundry (sheets, bedlinen, towels, bathrobes, underwear etc.) in this programme. When you press the quick wash function key, programme duration becomes notably shorter but effective washing is ensured thanks to intense washing movements. If the quick wash function is not selected, superior washing and rinsing performance is ensured for your heavily soiled laundry.

• Synthetics

You can use this programme to wash t-shirts, synthetic/cotton mix fabrics etc. Programme duration is notably shorter and efficient washing performance is ensured. If the quick wash function is not selected, superior washing and rinsing performance is ensured for your heavily soiled laundry.

• Woollens / Hand Wash

Use this programme to wash your woollen/delicate clothes. Select the appropriate temperature complying with the tag of your clothes. Your laundry will be washed with very delicate movements to avoid any damage.

4.3.6 Additional programmes

For special cases, additional programmes are available in the machine.

CINFORMATION

Additional programmes may differ according to the model of the machine.

Eco 40-60

The eco 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40 °C or 60 ° C, together in the same cycle, and that this programme is used to assess the compliance with the EU ecodesign legislation.

Although it washes longer than all other programmes, it provides high energy and water savings. Actual water temperature may be different from the stated wash temperature. When you load the machine with less laundry (e.g. ½ capacity or less), periods in programme stages may automatically get shorter. In this case, energy and water consumption will decrease.

Hygiene

Applying a steam step at the beginning of the programme allows to soften the dirt easily.

Use this programme for your laundry (baby clothes, bed sheets, bedlinen, underwear, etc. cotton items) for which you require an anti-allergic and hygienic washing at high temperature with intensive and long washing cycle. The high level of hygiene is ensured thanks to the steam application before the programme, long heating duration and additional rinsing step.

Programme was tested by “The British Allergy Foundation” (Allergy UK) with the 60°C temperature option selected and it was certified in terms of its efficacy in eliminating allergens in addition to bacteria and mould.

Allergy UK is the trademark of the British Allergy Foundation. The Seal of Approval has been designed to provide guidance to persons who want information whether the product significantly decreases the amount of allergens in the environment it is installed or whether it limits/ reduces/eliminates the allergens. Its purpose is to provide evidence that the products have been tested scientifically or reviewed to provide measurable results.

• Gentlecare

You can use this programme to wash delicate laundry such as cotton/synthetic mix knitted clothes or socks. Washing movements in this programme are more delicate. Set the temperature to 20 degrees or use the Cold Wash option for clothes whose colour you wish to preserve.

Washing Machine / User’s Manual

17 EN

• Xpress / Super Short

Use this programme to wash your lightly soiled cotton clothes in a short time. The programme duration can be reduced down to 14 minutes when the quick wash function is selected. When the quick wash function is selected, maximum 2 (two) kg of laundry must be washed.

• Dark Care / Jeans

Use this programme to preserve the colour of your dark-coloured clothes and jeans. This programme provides high efficiency in washing, thanks to a special drum movement, even at low temperatures. It is recommended to use liquid detergent or woollen shampoo for dark coloured laundry. Do not wash your delicate clothes that contain wool etc. in this programme.

• M x 40

You can use this programme to wash cottons and synthetics together without the need to sort them.

• Shirts

This programme is used to wash the shirts made from cotton, synthetic and synthetic blended fabrics altogether. It reduces wrinkles. Steam is applied at the end of the programme to help the wrinkle reducing function. The special spin profile and steam applied at the end of the programme reduce the wrinkles on your shirts. When the quick wash function is selected, the Pre-treatment algorithm is executed.

•Apply the pre-treatment chemical on your garments directly or add it together with detergent when the machine starts to take water from the main washing compartment. Thus, you can obtain the same performance as you obtain with normal washing in a much shorter period of time. Usage life of your shirts increases.

•Outdoor / Sports

Use this programme to wash outdoor/sports clothes that contain cotton/synthetic mix, as well as waterproof cloths like gore-tex. This programme washes your laundry delicately thanks to its special turning movements.

• Down Wear

Use this programme to wash your fibre duvets that bear "machine washable" tag. Check that you have loaded the duvet correctly in order not to damage the machine and the duvet. Remove the duvet cover before loading the duvet into the machine. Fold the duvet into two and load it into the machine. Load the duvet into the machine paying attention to place it in a way that it will not contact the bellow or the glass.

Steam is applied at the end of the programme to soften bulky laundry such as towels.

CINFORMATION

•Do not load the machine with more than a double fibre duvet (200 x 200 cm).

•Do not wash your cotton duvets, pillows etc. in the machine.

ACAUTION!

•Do not use the washing machine to wash materials such as carpets, rugs etc. Otherwise, permanent damage will occur to the machine.

•Lingerie

You can use this programme to wash hand-washable delicate clothes or women’s underwear. Small amount of laundry must be washed in a laundry bag. Clasps and buttons must be done up, and clothes with zip must be zipped.

18 / EN

Washing Machine / User’s Manual

• Classic

Use to wash your normally soiled, durable cotton and linen laundry. Although it washes longer than all other programmes, it provides high energy and water savings. Actual water temperature may be different from the stated wash temperature. When you load the machine with less laundry (e.g. ½ capacity or less), periods in programme stages may automatically get shorter. In this case, energy and water consumption will decrease more, providing a more economic wash

4.3.7 Special programmes

For specific applications, select any of the following programmes.

Spin+Drain

Use this programme to remove the water on the clothes/in the machine.

Before selecting this programme, select the desired spin speed and press Start/Pause button. First, the machine will drain the water inside of it. Then, it will spin the laundry at the selected spin speed, and drain the water coming off of the laundry.

If you only want to drain the water without spinning the laundry, select the “Spin+Pump programme, and use the Spin Speed Adjustment button to select the No Spin function. Press the Start/Pause button.

CINFORMATION

•Use a lower spin speed for delicate laundries.

4.3.8Temperature selection

Whenever a new programme is selected, the recommended temperature for the selected programme appears on the temperature indicator.

To decrease the temperature, press the Temperature Adjustment button. Temperature will decrease gradually. When the cold level is selected, temperature level lights will not be on.

CINFORMATION

•If the programme has not reached the heating step, you can change the temperature without switching the machine to Pause mode.

4.3.9Spin speed selection

Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the spin speed indicator.

To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases gradually. Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display. When the “No Spin” function is selected, rinse level indicator lights will not be on.

Rinse hold

If you are not going to unload your clothes immediately after the programme ends, you can use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the machine. Press Start/Pause button after this process if you want to drain the water without spinning your laundry. Programme will resume where it left off, drain the water and then it will be complete.

If you want to spin the laundry held in water, adjust the Spin Speed and press Start/Pause button. Programme will resume. Water will be drained, laundry will be spun and the programme will end.

CINFORMATION

•If the programme has not reached the spin step, you can change the spin speed without switching the machine to Pause mode.

Washing Machine / User’s Manual

19 EN

4.3.10 Auxiliary function selection

Select the desired auxiliary functions before starting the programme. You can also select or cancel auxiliary functions suitable for the running programme without pressing the Start/Pause button while the machine is operating. To do this, the machine must be in a step before the auxiliary function you are going to select or cancel. If the auxiliary function cannot be selected or cancelled, light of the relevant function will flash 3 times to warn the user.

CINFORMATION

•If a second auxiliary function conflicting with the first one is selected before starting the machine, the function selected first will be cancelled and the second auxiliary function selection will remain active.

•An auxiliary function which is not compatible with the programme cannot be selected. (See "Programme and consumption table")

•Auxiliary Function buttons may vary according to the model of the machine.

4.3.10.1 Auxiliary functions

• Prewash

A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water, detergent and time.

CINFORMATION

•Prewash without detergent is recommended for tulle and curtains.

•Fast+

When this function is selected, durations of relevant programmes get shorter by 50%.

Thanks to the optimised washing steps, high mechanic activity and optimum water consumption, high washing performance is achieved in spite of the reduced duration.

• Extra Rinse

This function enables the machine to carry out another rinsing cycle in addition to the one carried out after the main wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected by the minimal detergent remnants on the laundrwy can be reduced.

4.3.10.2 Functions/Programmes Selected by Pressing the Function Buttons for 3 Seconds

• Drum Clean

To select this programme, press and hold the auxiliary function button 1 for 3 seconds.

Use it regularly (every 1-2 months) to clean the drum and ensure the required hygiene is provided. Run the programme while the machine is totally empty. To obtain better results, put powder lime-scale remover for washing machines into the detergent compartment no. “2”. When the programme is over, leave the loading door ajar so that the inside of the machine gets dry.

20 / EN

Washing Machine / User’s Manual

CINFORMATION

•This is not a washing programme. It is a maintenance programme.

•Do not run this programme when there are any objects in the machine. If you try to do so, the machine will automatically detect that there is load inside and abort the programme.

•Child Lock

You can prevent children from tampering with the machine by using the Child Lock feature. Thus you can avoid any changes in a running programme.

CINFORMATION

•If the Programme Selection knob is turned when the Child Lock is enabled, "Con" appears on the display. While the Child Lock is enabled, you cannot make any change in the programmes, the selected temperature, the speed or the auxiliary functions.

•Even if another programme is selected with the Programme Selection knob while the Child Lock is enabled, previously selected programme will continue running.

To enable Child Lock:

Press and hold the Auxiliary Function button 2 for 3 seconds. While you’re holding the button pressed for 3 seconds, C03, C02 and C01 will be displayed respectively.Then, “Con” will be displayed to warn the user that child lock is enabled.If you press any button or turn the Programme Selection knob while the Child Lock is enabled, the same warning will be displayed.

To disable Child Lock:

Press and hold the Auxiliary Function button 2 for 3 seconds while the programme is running. While you’re holding the button pressed for 3 seconds, C03, C02 and C01 will be displayed respectively. Then, “COF” will be displayed to warn the user that child lock is disabled.

CINFORMATION

•In addition to the method above, to deactivate the Child Lock, switch the Programme Selection knob to On/Off position when no programme is running, and select another programme.

•Child Lock will not be disabled after a power failure or unplugging.

•AntiCrease+

If you press and hold the auxiliary function button 3 for 3 seconds, this function will be selected and the programme follow-up light of the relevant programme will turn on. When this function is selected, the drum will rotate for up to eight hours to ensure that the clothes do not crease at the end of the programme. At any time during these eight hours, you can cancel the programme and unload the machine. Just press any button or turn the programme selection knob to end the function. The programme follow-up light will remain on even if you end the function by pressing any button. If you end the function by turning the programme selection knob, the programme follow-up light will remain on or go off depending on the selected programme. If you do not cancel the function by pressing the Auxiliary Function button 3 for 3 seconds, it will be used in the next washing cycles as well.

4.3.11 End Time Adjustment

The End Time Adjustment function allows you to set the end time of the programme up to 19 hours. You can increase this time by 1-hour intervals.

CINFORMATION

•Please do not use liquid detergent if you have selected the End Time Adjustment function. Stains might remain on the clothes.

1.Open the loading door, place the laundry and add detergent, etc.

2.Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.

3.Press the End Time Adjustment button and select the desired time.

Washing Machine / User’s Manual

21 EN

4.Press the Start/Pause button. The delayed end time you have set will be displayed. Countdown will start for delayed end. On the display, “_” will move up and down next to the delayed end time.

CINFORMATION

•If the programme has not started, you can add laundry into the machine during the delayed end time.

5.At the end of the countdown, duration of the selected programme will be displayed. “_” will disappear and the selected programme will start.

Changing the delayed end time

If you want to change the time during countdown: Turn the programme selection knob to cancel the delayed end time function, and then set the desired time again.

1.Press the End Time Adjustment button. When pressed for the first time, the programme duration will be rounded up to the closest whole number time. Each following press will increase the time by an hour.

2.If you want to decrease the delayed end time, press the End Time Adjustment button consecutively until the desired time is displayed.

Cancelling the delayed end function

If you want to cancel the delayed end time countdown and start the programme immediately:

1.Set the Programme Selection knob to any programme. This way, the Delayed End time will be cancelled. The End/Cancel light will flash continuously.

2.Then, select the programme you want to run again.

3.Press Start/Pause button to start the programme.

4.3.12Starting the programme

1.Press Start/Pause button to start the programme.

2.Programme follow-up light showing the startup of the programme will turn on.

CINFORMATION

•If no programme is started or no key is pressed within 10 minutes during the programme selection process, the display lights will go off. Once the Programme Selection knob is turned or any button is pressed, display lights will turn on again.

4.3.13Progress of programme

Progress of a running programme can be followed from the Programme Follow-up indicator. At the beginning of each programme step, the relevant indicator light will turn on.

CINFORMATION

•If the “Anti-crease+” auxiliary function has been selected, “End” LED and “Anti-crease+” LED will be on at the same time while this step is continuing.

•To end the programme while the “Anti-crease+” step is running, simply press any button or turn the programme selection knob.

You can change the auxiliary functions, speed and temperature settings without stopping the programme flow while the programme is running. To do this, the change you are going to make must be something that will be carried out after the programme step that is running. If the change is not suitable, relevant lights will flash 3 times.

CINFORMATION

•If the machine does not proceed to the spinning step, the Rinse Hold function might be active or the automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the machine.

4.3.14Loading door lock

There is a locking system on the loading door of the machine that prevents opening of the loading door in cases when the water level is unsuitable.

22 / EN

Washing Machine / User’s Manual

Loading door light will start flashing when the machine is switched to Pause mode. The machine checks the level of the water inside. If the level is suitable, the loading door light will turn off and the loading door can be opened within 1-2 minutes.

If the level is unsuitable, the loading door light will remain on and the loading door cannot be opened. If you are obliged to open the loading door while the Loading Door light is on, you must cancel the current programme. See "Cancelling the programme"

AWARNING!

•Before opening the loading door, make sure that there is no water in the machine to avoid flooding. Water may be hot and could cause scalding.

4.3.15 Changing the selections after programme has started

Switching the machine to pause mode

Press the Start/Pause to switch the machine to pause mode while a programme is running. The light of the current programme will flash on the Programme Follow-up indicator, indicating that the machine has switched to pause mode.

Also, when the loading door is ready to be opened, the Loading Door light will turn off in addition to the programme step light.

Changing the auxiliary function, speed and temperature

Depending on the step the programme has reached, you can cancel or select auxiliary functions. See “Auxiliary function selection”.

You can also change the speed and temperature settings. See "Spin speed selection" and "Temperature selection".

CINFORMATION

•If no change is allowed, the relevant light will flash 3 times.

Adding and removing laundry

1.Press the “Start/Pause” button to pause the machine. The programme follow-up light of the relevant step during which the machine was switched into the pause mode will flash.

2.Wait until the Loading Door can be opened.

3.Open the loading door and add or take out laundry.

4.Close the loading door.

5.Make changes in auxiliary functions, temperature and speed settings if necessary.

6.Press the “Start/Pause” button to start the machine.

4.3.16Cancelling the programme

To cancel the programme, turn the Programme Selection knob to select another programme. Previous programme will be cancelled. End/Cancel light will flash continuously to notify that the programme has been cancelled.

When you turn the Programme Selection knob, the machine will end the programme but will not discharge the water inside. When you select and start a new programme, the newly selected programme will start depending on the step the previous programme was cancelled in. For example, the machine may take in additional water or continue to wash with the water inside.

CINFORMATION

•Depending on the step where the programme was cancelled in, you may have to add detergent and softener again for the programme you have selected anew.

Washing Machine / User’s Manual

23 EN

4.3.17 End of programme

At the end of the programme, “End” will be displayed.

1.Wait until the light of the loading door goes off completely.

2.Switch the programme selection knob to On/Off to switch off the machine.

3.Take out your laundry and close the loading door. Your machine is now ready for the next washing cycle.

4.3.18Your machine has the "Pause Mode" function.

After using the On/Off button to switch on the machine, if you do not start any programme in the selection step or do not perform anything else, or if you do not do anything in 10 minutes after the selected programme has ended, the machine will automatically switch to energy saving mode. Also, if your product has a display that shows programme time, this display will completely turn off. If you turn the Programme Selection knob or touch any button, the lights and the display will switch back to the previous position. The selections you make when exiting the energy efficiency mode may change. Check if your selections are correct before starting the programme. If necessary, make adjustments again. This is not an error.

24 / EN

Washing Machine / User’s Manual

4.4 Maintenance and cleaning

Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals.

4.4.1 Cleaning the detergent drawer

Clean the detergent drawer at regular intervals (every 4-5 washing cycles) as shown below in order to prevent accumulation of powder detergent in time. Lift the rear part of the siphon to remove it as illustrated.

If more than normal amount of water and softener mixture starts to gather in the softener compartment, the siphon must be cleaned.

1Press the dotted point on the siphon in the softener compartment and pull towards you until the

compartment is removed from the machine.

2.Wash the detergent drawer and the siphon with plenty of lukewarm water in a washbasin. In order to prevent the residues to contact your skin, clean it with an appropriate brush by wearing a pair of gloves.

3Insert the drawer back into its place after cleaning and make sure that it is seated well.

4.4.2Cleaning the loading door and the drum

For products with drum cleaning programme, please see Operating the product - Programmes.

CRepeat Drum Cleaning process in every 2 months.

Use an detergent / anti-limescale suitable for the washing machines.

After every washing make sure that no foreign substance is left in the drum.

If the holes on the bellow shown in the figure is blocked, open the holes using a toothpick.

Foreign metal substances will cause rust stains in the drum. Clean the stains on the drum surface by using cleaning agents for stainless steel.

Never use steel wool or wire wool. These will damage the painted, chromated and plastic surfaces.

4.4.3 Cleaning the body and control panel

Wipe the body of the machine with soapy water or non-corrosive mild gel detergents as necessary, and dry with a soft cloth.

Use only a soft and damp cloth to clean the control panel.

4.4.4 Cleaning the water intake filters

There is a filter at the end of each water intake valve at the rear of the machine and also at the end of each water intake hose where they are connected to the tap. These filters prevent foreign substances and dirt in the water to enter the washing machine. Filters should be cleaned as they do get dirty.

1.Close the taps.

2. Remove the nuts of the water intake hoses to access the filters on the water intake valves. Clean them with an appropriate brush. If the filters are too dirty, remove them from their places with a pliers and clean in this way.

3. Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under running water.

4.Replace the seals and filters carefully and tighten their nuts by hand.

Washing Machine / User’s Manual

25 EN

CAUTION: Temperature of the water inside the machine may rise up to 90 ºC. To avoid the burning risk, clean the filter after the water inside the machine is cooled down.

4.4.5 Draining remaining water and cleaning the pump filter

The filter system in your machine prevents solid items such as buttons, coins and fabric fibers clogging the pump impeller during discharge of washing water. Thus, the water will be discharged without any problem and the service life of the pump will extend.

If the machine fails to drain water, the pump filter is clogged. Filter must be cleaned whenever it is clogged or in every 3 months. Water must be drained off first to clean the pump filter.

In addition, prior to transporting the machine (e.g., when moving to another house) and in case of freezing of the water, water may have to be drained completely.

A CAUTION: Foreign substances left in the pump filter may damage your machine or may cause noise problem.

CAUTION: If the product is not being used, shut the tap shut, remove mains pipe and drain the water inside the machine against any likely freezing.

CAUTION: After each use, turn off the water tap to which the mains hose is connected.

In order to clean the dirty filter and discharge the water:

1 Unplug the machine to cut off the supply power.

A

2. Open the filter cover.

3 Follow the below procedures in order to drain water.

The product does not have an emergency water drain hose, in order to drain the water:

a. In order to collect the water to flow out of the filter, place a large vessel in front of the filter.

b. Turn and loosen the pump filter until water starts to flow (counterclockwise). Fill the flowing water into the container you have placed in front of the filter. Always keep a piece of cloth handy to absorb any spilled water.

c When the water inside the machine is finished, take out the filter completely by turning it.

4. Clean any residues inside the filter as well as fibers, if any, around the pump impeller region.

5.Replace the filter.

6.If the filter cap is composed of two pieces, close the filter cap by pressing on the tab. If it is one piece, seat the tabs in the lower part into their places first, and then press the upper part to close.

26 / EN

Washing Machine / User’s Manual

5Troubleshooting

	Problem	Reason	Solution
	Program does not start after	Start / Pause / Cancel button was not pressed.	• *Press the Start / Pause / Cancel button.
	closing the door.
		It may be difficult to close the loading door in case of	• Reduce the amount of laundry and make sure that
		excessive loading.	the loading door is closed properly.
	Programme cannot be started or	Washing machine has switched to self protection	• To cancel the programme, turn the Programme
	selected.	mode due to a supply problem (line voltage, water	Selection knob to select another programme.
		pressure, etc.).	Previous programme will be canceled. (see.
			“Cancellation of program”)
	Water in the machine.	Some water might have remained in the product due to the	• This is not a failure; water is not harmful to the
		quality control processes in the production.	machine.
	The machine enters standby mode	Tap is turned off.	• Turn on the taps.
	after the programme starts or it	Water inlet hose is bent.	• Flatten the hose.
	does not take in water.	Water inlet filter is clogged.	• Clean the filter.
		Loading door may be open.	• Close the door.
		The water connection may be wrong or water may be	• Check the water connection. If the water is cut
		cut off (When the water is cut off, washing or rinsing	off, press the Start/Pause key after the water has
		LEDs flash).	been supplied again to resume the operation from
			standby mode.
	Machine does not drain water.	Water drain hose might be clogged or twisted.	• Clean or flatten the hose.
		Pump filter is clogged.	• Clean the pump filter.
	Machine vibrates or makes noise.	Machine might be standing unbalanced.	• Adjust the feet to level the machine.
		A hard substance might have entered into the pump	• Clean the pump filter.
		filter.
		Transportation safety bolts are not removed.	• Remove the transportation safety bolts.
		Laundry quantity in the machine might be too little.	• Add more laundry to the machine.
		Machine might be overloaded with laundry.	• Take out some of the laundry from the machine
			or distribute the load by hand to balance it
			homogenously in the machine.
		Machine might be leaning on a rigid item.	• Make sure that the machine is not leaning on
			anything.
	There is water leaking from the	Water drain hose might be clogged or twisted.	• Clean or flatten the hose.
	bottom of the washing machine.
		Pump filter is clogged.	• Clean the pump filter.
	Machine stopped shortly after the	Machine might have stopped temporarily due to low	• It will resume running when the voltage restores to
	programme started.	voltage.	the normal level.
	Machine directly discharges the	Draining hose might not be at adequate height.	• Connect the water draining hose as described in
	water it takes in.		the operation manual.
	No water can be seen in the	The water level is not visible from outside of the	• This is not a failure.
	machine during washing.	washing machine.
	Loading door cannot be opened.	Door lock is activated because of the water level in	• Drain the water by running the Pump or Spin
		the machine.	programme.
		Machine is heating up the water or it is at the spinning	• Wait until the programme completes.
		cycle.
		Child lock is engaged. Door lock will be deactivated	• Wait for a couple of minutes for deactivation of
		a couple of minutes after the programme has come	the door lock.
		to an end.
		Loading door may be stuck because of the pressure it	• Grab the handle and push and pull the loading
		is subjected to.	door to release and open it.
	Washing takes longer time than	Water pressure is low.	• Machine waits until taking in adequate amount
	specified in the manual.(*)		of water to prevent poor washing quality due to
			the decreased amount of water. Therefore, the
			washing time extends.
		Voltage might be low.	• Washing time is prolonged to avoid poor washing results
			when the supply voltage is low.
		Input temperature of water might be low.	• Required time to heat up the water extends in cold
			seasons. Also, washing time can be lengthened to
			avoid poor washing results.
		Number of rinses and/or amount of rinse water might	• Machine increases the amount of rinse water
		have increased.	when good rinsing is needed and adds an extra
			rinsing step if necessary.
		Excessive foam might have occurred and automatic	• Use recommended amount of detergent.
		foam absorption system might have been activated
		due to too much detergent usage.

Washing Machine / User’s Manual

27 EN