Service connector for B.Braun Infusomat / Perfusor
For activating the service program, showing the software version, changing the contrast of the display and other service settings a special service connector is needed. The connector is plugged in the MFC socket at the rear of the unit.
The plug contains jumpers which are connected as followed:
•For 5-pin plug: connection between 2 + 4
•For 12-pin plug: connection between 6 + 8 + 10
If such a plug is not available the pins can be connected temporarily directly at the socket.
More information in the respective service manual.
Many thanks to Karsten (Germany)!