ASUS M4N75TD User Manual

M4N75TD

Motherboard

E5353

First Edition V1

February 2010

Copyright © 2010 ASUSTeK COMPUTER INC. All Rights Reserved.

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing byASUS; or (2) the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

Offer to Provide Source Code of Certain Software

This product may contain copyrighted software that is licensed under the General Public License (“GPL”) and under the Lesser General Public License Version (“LGPL”). The GPL and LGPL licensed code in this product is distributed without any warranty. Copies of these licenses are included in this product.

You may obtain the complete corresponding source code (as defined in the GPL) for the GPL Software, and/or the complete corresponding source code of the LGPL Software (with the complete machinereadable “work that uses the Library”) for a period of three years after our last shipment of the product including the GPL Software and/or LGPL Software, which will be no earlier than December 1, 2011, either

(1) for free by downloading it from http://support.asus.com/download; or

(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to:

ASUSTeK Computer Inc.

Legal Compliance Dept.

15 Li Te Rd.,

Beitou, Taipei 112

Taiwan

In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you.

The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code.

This offer is valid to anyone in receipt of this information.

ASUSTeK is eager to duly provide complete source code as required under various Free Open Source Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notification to the email address [e-mail], stating the product and describing the problem (please do NOT send large attachments such as source code archives etc to this email address).

ii

Contents

Contents.......................................................................................................	iii
Notices.........................................................................................................	vi
Safety information......................................................................................	vii
About this guide.........................................................................................	vii
M4N75TD specifications summary............................................................	ix

Chapter 1		Product introduction
1.1	Welcome!.......................................................................................		1-1
1.2	Package contents.........................................................................		1-1
1.3	Special features............................................................................		1-1
	1.3.1	Product highlights ............................................................	1-1
	1.3.2	ASUS Unique Features . ..................................................	1-2
1.4	Before you proceed......................................................................		1-4
1.5	Motherboard overview.................................................................		1-4
	1.5.1	Placement direction .........................................................	1-4
	1.5.2	Screw holes .....................................................................	1-4
	1.5.3	Motherboard layout ..........................................................	1-5
	1.5.4	Layout contents . ..............................................................	1-5
1.6	Central Processing Unit (CPU)....................................................		1-6
	1.6.1	Installing the CPU ............................................................	1-6
	1.6.2	Installing the heatsink and fan .........................................	1-7
1.7	System memory............................................................................		1-9
	1.7.1	Overview ..........................................................................	1-9
	1.7.2	Memory configurations . ...................................................	1-9
	1.7.3	Installing a DIMM ...........................................................	1-14
	1.7.4	Removing a DIMM .........................................................	1-14
1.8	Expansion slots..........................................................................		1-15
	1.8.1	Installing an expansion card ..........................................	1-15
	1.8.2	Configuring an expansion card ......................................	1-15
	1.8.3	PCI slots . .......................................................................	1-15
	1.8.4	PCI Express 2.0 x1 slots ...............................................	1-15
	1.8.5	PCI Express 2.0 x16 slots .............................................	1-15
1.9	Jumpers	.......................................................................................	1-16
1.10	Onboard .......................................................................switches		1-18
1.11	Onboard .............................................................................LEDs		1-19

iii

Contents

1.12	Connectors..................................................................................		1-21
	1.12.1	Rear panel connectors..................................................	1-21
	1.12.2	Internal connectors........................................................	1-23
1.13	Software support........................................................................		1-31
	1.13.1 Installing an operating system.......................................		1-31
	1.13.2	Support DVD information...............................................	1-31
1.14	NVIDIA® SLI™ technology support...........................................		1-32
	1.14.1	NVIDIA® SLI™ technology.............................................	1-32
	1.14.2 NVIDIA® Hybrid SLI™ technology ................................		1-36

Chapter 2

2.1	Knowing BIOS...............................................................................		2-1
2.2	Updating BIOS..............................................................................		2-1
	2.2.1	ASUS Update utility.........................................................	2-2
	2.2.2	ASUS EZ Flash 2 utility...................................................	2-3
	2.2.3	ASUS CrashFree BIOS 3 utility.......................................	2-4
2.3	BIOS setup program.....................................................................		2-5
	2.3.1	BIOS menu screen..........................................................	2-6
	2.3.2	Menu bar.........................................................................	2-6
	2.3.3	Navigation keys...............................................................	2-7
	2.3.4	Menu items......................................................................	2-7
	2.3.5	Submenu items................................................................	2-7
	2.3.6	Configuration fields..........................................................	2-7
	2.3.7	General help....................................................................	2-7
	2.3.8	Pop-up window................................................................	2-7
	2.3.9	Scroll bar.........................................................................	2-7
2.4	Main menu.....................................................................................		2-8
	2.4.1	System Time....................................................................	2-8
	2.4.2	System Date....................................................................	2-8
	2.4.3	Language.........................................................................	2-8
	2.4.4	Primary IDE Master/Slave...............................................	2-8
	2.4.5	SATA 1–4.........................................................................	2-9
	2.4.6	Storage Configuration....................................................	2-10
	2.4.7	System Information........................................................	2-10
2.5	Ai Tweaker menu........................................................................		2-11
	2.5.1	Ai Overclock Tuner.........................................................	2-11
	2.5.2	CPU Ratio.......................................................................	2-11

iv

Contents

	2.5.3	DRAM Frequency..........................................................	2-12
	2.5.4	CPU/NB Frequency.......................................................	2-12
	2.5.5	HT Link Speed...............................................................	2-12
	2.5.6	DRAM Timing Configuration..........................................	2-12
	2.5.7	DRAM Driving Configuration.........................................	2-13
	2.5.8	Processor Voltage.........................................................	2-13
	2.5.9	CPU/NB Voltage............................................................	2-14
	2.5.10	CPU VDDA Voltage.......................................................	2-14
	2.5.11	DRAM Voltage...............................................................	2-14
	2.5.12	HT Voltage.....................................................................	2-14
	2.5.13	NB Voltage.....................................................................	2-14
	2.5.14	CPU/LDT Spread Spectrum..........................................	2-14
	2.5.15	PCIE Spread Spectrum.................................................	2-14
	2.5.16	SATA Spread Spectrum.................................................	2-14
	2.5.17	PCI Spread Spectrum....................................................	2-14
2.6	Advanced menu..........................................................................		2-15
	2.6.1	CPU Configuration.........................................................	2-15
	2.6.2	Chipset..........................................................................	2-16
	2.6.3	Onboard Devices Configuration....................................	2-17
	2.6.4	PCIPnP..........................................................................	2-17
	2.6.5	USB Configuration.........................................................	2-18
2.7	Power menu................................................................................		2-19
	2.7.1	Suspend Mode..............................................................	2-19
	2.7.2	ACPI 2.0 Support...........................................................	2-19
	2.7.3	ACPI APIC support........................................................	2-19
	2.7.4	Hardware Monitor..........................................................	2-19
2.8	Boot menu...................................................................................		2-21
	2.8.1	Boot Device Priority.......................................................	2-21
	2.8.2	Boot Settings Configuration...........................................	2-21
	2.8.3	Security..........................................................................	2-22
2.9	Tools menu..................................................................................		2-23
	2.9.1	ASUS EZ Flash 2..........................................................	2-23
	2.9.2	Express Gate.................................................................	2-23
	2.9.3	ASUS O.C. Profile.........................................................	2-24
	2.9.4	AI NET 2........................................................................	2-24
2.10	Exit menu.....................................................................................		2-25

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

•This device may not cause harmful interference, and

•This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

REACH

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://green.asus.com/english/REACH.htm.

DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products.

DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.

vi

Safety information

Electrical safety

•To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.

•When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.

•Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.

•Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.

•Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.

•If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.

Operation safety

•Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package.

•Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.

•To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.

•Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet.

•Place the product on a stable surface.

•If you encounter technical problems with the product, contact a qualified service technician or your retailer.

About this guide

This user guide contains the information you need when installing and configuring the motherboard.

How this guide is organized

This guide contains the following parts:

•Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new technology it supports.

•Chapter 2: BIOS setup

This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.

vii

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.

DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task.

CAUTION: Information to prevent damage to the components when trying to complete a task.

IMPORTANT: Instructions that you MUST follow to complete a task.

NOTE: Tips and additional information to help you complete a task.

Where to find more information

Refer to the following sources for additional information and for product and software updates.

1.ASUS websites

The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.

2.Optional documentation

Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.

Typography

Bold text	Indicates a menu or an item to select.
Italics	Used to emphasize a word or a phrase.
<Key>	Keys enclosed in the less-than and greater-than sign means
	that you must press the enclosed key.
	Example: <Enter> means that you must press the Enter or
	Return key.
<Key1>+<Key2>+<Key3>	If you must press two or more keys simultaneously, the key
	names are linked with a plus sign (+).
	Example: <Ctrl>+<Alt>+<Del>

viii

M4N75TD specifications summary

CPU

Chipset

System bus

Memory

Multi-GPU support

Expansion slots

Storage

LAN

Audio

IEEE 1394

USB

AMD® SocketAM3; Phenom™ II /Athlon™ II /

Sempron™ 100 Series Processors

AMD® 140W CPU Support

Supports 45nm CPU

NVIDIA nForce® 750a SLI®

Supports NVIDIA Clock Calibration (NVCC) function

Up to 5200 MT/s HyperTransport™ 3.0

4 x DIMM, max. 16 GB, DDR3 2000(O.C.) / 1333 / 1066 MHz

ECC / non-ECC, un-buffered memory

Dual-channel memory architecture

* When you install a total memory of 4 GB capacity or more, Windows® 32-bit operating system may only recognize less than 3 GB. We recommend using a maximum of 3 GB system memory if you are using a Windows® 32-bit OS.

** Refer to www.asus.com or this user manual for the

Memory QVL (Qualified Vendors Lists)

Supports NVIDIA® SLI™ Technology at x8 link

Supports Hybrid SLI® Technology

2 x PCIe 2.0 x16 slots (dual at x8 mode) 2 x PCIe x1 slots

2 x PCI 2.2 slots

NVIDIA nForce® 750a SLI® chipset - 1 x Ultra DMA 133/100 port

- 6 x SATA 3.0 Gb/s ports (Legacy IDE operation is only supported on drives 1–4)

NVIDIA® MediaShield™ RAID supports RAID 0, 1, 0+1, 5, and JBOD

Broadcom® B5071 Gigabit LAN controller featuring AI NET 2

VIA® VT1708S 8-channel High DefinitionAudio CODEC

- Supports Jack-Detection, Multi-Streaming,

and Front Panel Jack-Retasking

- Optical S/PDIF Out port at back I/O - ASUS Noise Filter

VIA® VT6308P controller supports 2 x IEEE 1394a ports

12 x USB 2.0 ports (6 ports at midboard; 6 ports at back panel)

(continued on the next page)

ix

M4N75TD specifications summary

ASUS Unique Features	ASUS Exclusive Features
	-	Core Unlocker
	-	MemOK!
	ASUS Power Solutions
	- 8+1 Phase Power Design
	- 100% Long-Life Solid Cap.
	-	EPU
	ASUS Express Gate
	ASUS Quiet Thermal Solution
	- Fanless Design: stylish heatsink solution
	-	Stack Cool 3
	ASUS EZ DIY
	-	CrashFree BIOS 3
	-	O.C. Profile
	-	EZ Flash 2
	-	MyLogo 2™
	- Multi-language BIOS
ASUS Exclusive	Intelligent overclocking tools
Overclocking Features	-	TurboV
	-	Turbo Key
	Precision Tweaker 2
	- vDIMM: 16-step DRAM voltage control
	- vCore: Adjustable CPU voltage at 0.0125V increment
	- vChipset (N.B.): 4-step voltage control
	SFS (Stepless Frequency Selection):
	- FSB tuning from 200MHz up to 600MHz at 1MHz
		increment
	- Memory tuning from 1066MHz up to 2000MHz
	- PCIe frequency tuning from 100MHz to 200MHz
		at 1MHz increment
	Overclocking protection:
	- ASUS C.P.R. (CPU Parameter Recall)
Rear panel I/O ports	1 x PS/2 keyboard port (purple)
	1 x PS/2 mouse port (green)
	1 x Optical S/PDIF Out port
	1 x IEEE 1394a port
	1 x LAN (RJ-45) port
	6 x USB 2.0/1.1 ports
	8-channel audio I/O ports
	(continued on the next page)

M4N75TD specifications summary

Internal I/O connectors

BIOS features

Support CD contents

Form factor

3 x USB connectors support additional 6 USB ports

1 x IDE connector

1 x COM connector

6 x SATA connectors

1 x CPU Fan connector

2 x Chassis Fan connectors (1 x 4-pin, 1 x 3-pin) 1 x Power Fan connector

1 x IEEE1394a connector

1 x MemOK! button

1 x Core Unlocker switch

1 x S/PDIF Out Header Front panel audio connector 24-pin ATX Power connector

8-pin ATX 12V Power connector System Panel

8 Mb Flash ROM, AMI BIOS, PnP, DMI 2.0, WfM2.0, SM BIOS 2.5, ACPI 2.0, ASUS EZ Flash 2,

ASUS CrashFree BIOS 3

Drivers

ASUS Utilities

ASUS Update

Anti-virus software (OEM version)

ATX form factor: 12 in x 9.6 in (30.5 cm x 24.4 cm)

* Specifications are subject to change without notice.

xi

xii

Chapter 1

Product introduction

1.1Welcome!

Thank you for buying an ASUS® M4N75TD motherboard!

The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards!

Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below.

1.2Package contents

Check your motherboard package for the following items.

Motherboard		ASUS M4N75TD motherboard
Cables		1 x Ultra DMA 133/100/66 cable
		2 x Serial ATA cables
		1 x SLI bridge cable
	Accessories	1 x I/O shield
Application DVD		ASUS motherboard support DVD
Documentations		User manual

If any of the above items is damaged or missing, contact your retailer.

1.3Special features

1.3.1Product highlights

AMD® Socket AM3; Phenom™ II / Athlon™ II / Sempron™ 100 Series Processors

This motherboard supports AMD® AM3 multi-core processors with unique L3 cache and delivers better overclocking capabilities with less power consumption. It features dual-channel DDR3 1333 memory support and accelerates data transfer rate up to 5200MT/s via HyperTransort™ 3.0 based system bus. This motherboard also supports AMD® CPUs in the new 45nm manufacturing process.

Chapter 1: Product introduction

1-1

NVIDIA nForce® 750a SLI®

NVIDIA nForce® 750a SLI® media and communication processors (MCPs) are the foundation for the world’s ultimate gaming PC. The MCPs support the NVIDIA® Scalable Link Interface (SLI) technology that allows two graphics processing units (GPUs) in a single system. The NVIDIA nFORCE® 750a SLI® chipset also supports six (6) Serial ATA 3 Gb/s devices, PCI Express x16 slots with NVIDIA® SLI™ support at dual x8 mode, and up to 12 USB 2.0 ports.

DDR3 2000(O.C.) support

This motherboard supports DDR3 2000(O.C,), which provides faster data transfer rate and more bandwidth to increase memory data transfer rate and computing efficiency. This enhances system performance in 3D graphics and other memory demanding applications.

1.3.2ASUS Unique Features

ASUS Express Gate

Express Gate is an ASUS exclusive OS that provides you with quick access to the Internet and key applications before entering the Windows® OS.

ASUS Exclusive Features Core Unlocker

1 2

ASUS Core Unlocker simplifies the activation of a latentAMD® CPU—with just a simple switch or hot key. Enjoy an instant performance boost by simply unlocking the extra cores, without performing complicated BIOS changes.

MemOK!

Memory compatibility is among the top concerns during computer upgrades. Worry no more. MemOK! is the fastest memory booting solution today. This remarkable memory rescue tool requires nothing but a push of a button to patch memory issues and get your system up and running in no time. The technology is able to determine failsafe settings that can dramatically improve your system booting success.

ASUS Power Solutions

8+1 Phase Power Design

To fully unleash the latest generation AM3 CPU’s potential, ASUS M4N75TD motherboard has adopted the brand-new 8-phase VRM power design, which delivers high power efficiency and supreme overclocking ability. This series’ high quality power components effective lowers system temperature to ensure longer component lifespan. ASUS M4N75TD also features an extra 1-phase power for integrated memory/HT controller to provide independent power to vital components.

1-2	ASUS M4N75TD

100% Long-Life Solid Cap.

This motherboard uses all long-life capacittors onboard for durability, imporved lifespan, and enhanced thermal capacity.

ASUS EPU

The ASUS EPU (Energy Processing Unit) provides total system power management by detecting current PC loadings and intelligently moderating power usage for critical PC components in real-time–helping save power and money!

ASUS Quiet Thermal Solutions

Fanless Design: stylish heatsink solution

The streamline-shaped heatsink features 0-dB thermal solution that offers users a noiseless PC environment. Not only the beautifully curved fins upgrade the visual enjoyment for motherboard users, but also the special thickened bottom design effectively cools down hot airflows generated by the north bridge chipset. Combined with usability and aesthetics, the ASUS streamline-shaped heatsink will give users an extremely silent and cooling experience with the elegant appearance!

Up to 20ºC (36ºF) Cooler—Stack Cool 3

Stack Cool 3 is a fanless cooling solution offered exclusively by ASUS. It effectively and noiselessly transfers heat generated by the critical

components to the other side of the specially designed PCB (printed circuit board) for effective heat dissipation—making temperatures cooler by up to 20ºC.

ASUS Intelligent Overclocking Tools

TurboV

Feel the adrenaline rush of real-time O.C.—now a reality with the ASUS TurboV. This easy O.C. tool allows you to overclock without exiting or rebooting the OS: and its user-friendly interface makes overclock with just a few clicks away. More, theASUS OC Profiles in TurboV provides the best O.C. settings in different scenarios.

Turbo Key

ASUS Turbo Key allows you to turn the PC power button into a physical overclocking button. After the easy setup, Turbo Key boosts performances without interrupting ongoing work or games, simply through pressing the button.

Chapter 1: Product introduction

1-3

1.4Before you proceed

Take note of the following precautions before you install motherboard components or change any motherboard settings.

• Unplug the power cord from the wall socket before touching any component.

• Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.

•Hold components by the edges to avoid touching the ICs on them.

•Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.

•Before you install or remove any component, switch off the ATX power supply and detach its power cord. Failure to do so may cause severe damage to the motherboard, peripherals, or components.

1.5Motherboard overview

1.5.1Placement direction

When installing the motherboard, ensure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below.

1.5.2Screw holes

Place nine (9) screws into the holes indicated by circles to secure the motherboard to the chassis.

Do not overtighten the screws! Doing so can damage the motherboard.

Place this side towards the rear of the chassis.

1-4

ASUS M4N75TD

1.5.3Motherboard layout

1.5.4Layout contents

Connectors/Jumpers/Slots		Page
1.	ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)	1-24
2.	CPU socket AM3	1-6
3.	CPU, Chassis and Power Fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1,	1-26
	3-pin CHA_FAN2, 3-pin PWR_FAN)
4.	DDR3 DIMM slots	1-9
5.	MemOK! switch	1-18
6.	Serial ATA connectors (7-pin SATA1-6)	1-25
7.	IDE connector (40-1 pin PRI_IDE)	1-23
8.	Standby power LED (SB_PWR)	1-19
9.	Clear RTC RAM (CLRTC)	1-16
10.	System panel connector (20-8 pin PANEL)	1-27
11.	CPU overvoltage setting (3-1 pin OV_CPU)	1-17
12.	USB connectors (10-1 pin USB78, USB910, USB1112)	1-28
13.	Serial port connector (10-1 pin COM1)	1-29
14.	Core Unlocker switch (CORE_UNLOCKER)	1-19
15.	IEEE 1394a connector (10-1 pin IE1394_2)	1-30
16.	Digital audio connector (4-1 pin SPDIF_OUT)	1-28
17.	Front panel audio connector (10-1 pin AAFP)	1-29

Chapter 1: Product introduction

1-5

1.6Central Processing Unit (CPU)

The motherboard comes with an AM3 socket designed for AMD® Phenom™ II / Athlon™ II / Sempron™ 100 Series Processors.

The CPU socket is not compatible with AMD® Opteron™ processors. Do not install an Opteron™ processor on this motherboard.

1.6.1Installing the CPU

To install a CPU:

1.Locate the CPU socket on the motherboard.

2. Press the lever sideways to unlock

the socket, then lift it up to a Socket lever 90°–100° angle.

Ensure that the socket lever is lifted up to 90°–100° angle, otherwise the CPU will not fit in completely.

3.Position the CPU above the socket such that the CPU corner with the gold triangle matches the socket corner with a small triangle.

4. Carefully insert the CPU into the socket until it fits in place.

The CPU fits only in one correct orientation. DO NOT force the CPU into the socket to prevent bending the pins and damaging the CPU!

Small triangle

Gold triangle

1-6	ASUS M4N75TD

5.When the CPU is in place, push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked.

6. Install a CPU heatsink and fan following the instructions that came with the heatsink package. You can also refer to section 1.6.2 Installing the heatsink and fan for instructions.

7. Connect the CPU fan cable to the CPU_FAN connector on the motherboard.

Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector.

1.6.2Installing the heatsink and fan

Ensure that you use onlyAMD-certified heatsink and fan assembly.

To install the CPU heatsink and fan:

1.Place the heatsink on top of the installed CPU, making sure that the heatsink fits properly on the retention module base.

• The retention module base is already installed on the motherboard upon purchase.

•You do not have to remove the retention module base when installing the CPU or installing other motherboard components.

•If you purchased a separate CPU heatsink and fan assembly, ensure that a Thermal Interface Material is properly applied to the CPU heatsink or CPU before you install the heatsink and fan assembly.

CPU Fan

CPU Heatsink

Retention bracket

Retention Module Base

Retention bracket lock

Chapter 1: Product introduction

1-7

Your boxed CPU heatsink and fan assembly should come with installation instructions for the CPU, heatsink, and the retention mechanism. If the instructions in this section do not match the CPU documentation, follow the latter.

2.Attach one end of the retention bracket to the retention module base.

1

2

34 5

3.Align the other end of the retention bracket to the retention module base. A clicking sound denotes that the retention bracket is in place.

Ensure that the fan and heatsink assembly perfectly fits the retention mechanism module base, otherwise you cannot snap the retention bracket in place.

4.Push down the retention bracket lock on the retention mechanism to secure the heatsink and fan to the module base.

5.When the fan and heatsink assembly is in place, connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN.

Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector.

1-8	ASUS M4N75TD

1.7System memory

1.7.1Overview

The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) sockets. A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are developed for better performance with less power consumption. The figure illustrates the location of the DDR3 DIMM sockets:

Channel Sockets

Channel A DIMM_A1 and DIMM_B1

Channel B DIMM_A2 and DIMM_B2

1.7.2Memory configurations

You may install 1GB, 2GB and 4GB unbuffered ECC/non-ECC DDR3 DIMMs into the DIMM sockets.

• You may install varying memory sizes in ChannelAand Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration.Any excess memory from the higher-sized channel is then mapped for single-channel operation.

•Always install DIMMs with the same CAS latency. For optimum compatibility, we recommend that you obtain memory modules from the same vendor.

•Due to the memory address limitation on 32-bit Windows OS, when you install 4GB or more memory on the motherboard, the actual usable memory for the OS can be

about 3GB or less. For effective use of memory, we recommend that you install a 64-bit Windows OS when having 4GB or more memory installed on the motherboard.

•This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less (Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1 Megabyte/MB).

• The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. To operate at the vendor-marked or at a higher frequency, refer to section 2.4 Ai Tweaker menu for manual memory frequency adjustment.

•For system stability, use a more efficient memory cooling system to support a full memory load (4 DIMMs) or overclocking condition.

Chapter 1: Product introduction

1-9

M4N75TD Motherboard Qualified Vendors Lists (QVL)

DDR3-1600MHz capability

Vendor	Part No.	Size	SS/	Chip	Chip	Timing	Voltage	DIMM socket support (Optional)
			DS	Brand	NO.			1 DIMM	2 DIMM	4 DIMM
A-DATA	AX3U1600PB1G8-2P	2GB(2 x 1GB)	SS	-	-	8-8-8-24	1.65-1.85	•	•	•
A-DATA	AD31600E001GMU	3GB(3 x 1GB)	SS	-	-	8-8-8-24	1.65-1.85	•	•	•
A-DATA	AX3U1600PB1G8-3P	3GB(3 x 1GB)	SS	-	-	8-8-8-24	1.65-1.85	•	•	•
A-DATA	AX3U1600GB2G9-AG(XMP)	4GB(2 x 2GB)	DS	-	-	9-9-9-24	1.65~1.85	•	•	•
A-DATA	AX3U1600XB2G7-EF(XMP)	4GB(2 x 2GB)	DS	-	-	7-7-7-20	1.75-1.85	•	•	•
A-DATA	AD31600F002GMU(XMP)	6GB(3 x 2GB)	DS	-	-	7-7-7-20	1.75-1.85	•	•	•
A-DATA	AX3U1600GB2G9-3G(XMP)	6GB(3 x 2GB)	DS	-	-	9-9-9-24	1.65~1.85	•	•	•
A-DATA	AX3U1600GB2G9-3G(XMP)	6GB(3 x 2GB)	DS	-	-	9-9-9-24	1.65~1.85	•	•	•
A-DATA	AX3U1600GB2G9-3G	6GB(3 x 2GB)	DS	-	-	9-9-9-24	1.65~1.85	•	•	•
A-DATA	AX3U1600XB2G7-FF(XMP)	6GB(3 x 2GB)	DS	-	-	7-7-7-20	1.75-1.85	•	•	•
CORSAIR	TR3X3G1600C8D	3GB(3 x 1GB)	SS	-	-	8-8-8-24	1.65	•	•
CORSAIR	TR3X3G1600C8DVer2.1(XMP)	3GB(3 x 1GB)	SS	-	-	8-8-8-24	1.65	•	•
CORSAIR	TR3X3G1600C9Ver1.1(XMP)	3GB(3 x 1GB)	SS	-	-	9-9-9-24	1.65	•	•
CORSAIR	CMD4GX3M2A1600C8(XMP)	4GB(2 x 2GB)	DS	-	-	8-8-8-24	1.65	•	•	•
CORSAIR	CMG4GX3M2A1600C7(XMP)	4GB(2 x 2GB)	DS	-	-	7-7-7-20	1.65	•	•
CORSAIR	CMX4GX3M2A1600C9(XMP)	4GB(2 x 2GB)	DS	-	-	9-9-9-24	1.65	•	•	•
CORSAIR	TR3X6G1600C8D	6GB(3 x 2GB)	DS	-	-	8-8-8-24	1.65	•		•
CORSAIR	TR3X6G1600C8DVer2.1(XMP)	6GB(3 x 2GB)	DS	-	-	8-8-8-24	1.65	•	•	•
CORSAIR	TR3X6G1600C9Ver2.1(XMP)	6GB(3 x 2GB)	DS	-	-	9-9-9-24	1.65		•	•
CORSAIR	CMD8GX3M4A1600C8(XMP)	8GB(4 x 2GB)	DS	-	-	8-8-8-24	1.65	•	•	•
CORSAIR	CMX8GX3M4A1600C9(XMP)	8GB(4 x 2GB)	DS	-	-	9-9-9-24	1.65	•	•
Crucial	BL12864BA1608.8SFB(XMP)	1GB	SS	-	-	-	1.8	•	•	•
Crucial	BL25664BN1608.16FF(XMP)	2GB	DS	-	-	8-8-8-24	1.65	•	•	•
G.SKILL	F3-12800CL9D-2GBNQ	2GB(2 x 1GB)	SS	-	-	-	1.6	•	•
G.SKILL	F3-12800CL9D-4GBRL	2GB(2 x 1GB)	SS	-	-	-	1.6	•	•
G.SKILL	F3-12800CL7D-4GBRH(XMP)	4GB(2 x 2GB)	DS	-	-	7-7-7-24	1.65	•	•	•
G.SKILL	F3-12800CL8D-4GBRM(XMP)	4GB(2 x 2GB)	DS	-	-	8-8-8-24	1.6	•	•	•
G.SKILL	F3-12800CL9D-4GBECO(XMP)	4GB(2 x 2GB)	DS	-	-	9-9-9-24	1.35	•	•	•
G.SKILL	F3-12800CL8T-6GBPI(XMP)	6GB(3 x 2GB)	DS	-	-	8-8-8-21	1.6~1.65	•	•	•
G.SKILL	F3-12800CL9T-6GBNQ	6GB(3 x 2GB)	DS	-	-	9-9-9-24	1.5-1.6	•	•	•
KINGMAX	FLGD45F-B8MF7(XMP)	1GB	SS	-	-		-	•	•	•
KINGMAX	FLGE85F-B8MF7(XMP)	2GB	DS	-	-		-	•	•	•
KINGSTON	KHX1600C9D3K3/12GX(XMP)	12GB(3 x 4GB)	DS	-	-	-	1.65	•	•	•
KINGSTON	KHX1600C9D3K3/12GX(XMP)	12GB(3 x 4GB)	DS	-	-	9	1.65	•	•	•
KINGSTON	KHX1600C8D3K2/4GX(XMP)	4GB(2 x 2GB)	DS	-	-	8	1.65	•	•	•
KINGSTON	KHX1600C8D3K2/4GX(XMP)	4GB(2 x 2GB)	DS	-	-	8	1.65	•	•	•
KINGSTON	KHX1600C8D3T1K2/4GX(XMP)	4GB(2 x 2GB)	DS	-	-	8	1.65	•	•	•
KINGSTON	KHX1600C9D3K2/4G	4GB(2 x 2GB)	DS	-	-	-	1.7~1.9	•
KINGSTON	KHX1600C9D3K3/6GX(XMP)	6GB(3 x 2GB)	DS	-	-	9	1.65	•	•	•
OCZ	OCZ3OB1600LV4GK	4GB(2 x 2GB)	DS	-	-	9-9-9	1.65	•	•	•
OCZ	OCZ3P1600LV4GK	4GB(2 x 2GB)	DS	-	-	7-7-7	1.65	•
OCZ	OCZ3X16004GK(XMP)	4GB(2 x 2GB)	DS	-	-	7-7-7	1.9	•	•	•
OCZ	OCZ3G1600LV6GK	6GB(3 x 2GB)	DS	-	-	8-8-8	1.65	•	•
OCZ	OCZ3X1600LV6GK(XMP)	6GB(3 x 2GB)	DS	-	-	8-8-8	1.65	•	•	•
OCZ	OCZ3X1600LV6GK(XMP)	6GB(3 x 2GB)	DS	-	-	8-8-8	1.65	•	•	•
Super Talent	WP160UX4G8(XMP)	4GB(2 x 2GB)	DS	-	-	8	-	•	•	•
Super Talent	WP160UX4G9(XMP)	4GB(2 x 2GB)	DS	-	-	9	-	•	•	•
Super Talent	WB160UX6G8(XMP)	6GB(3 x 2GB)	DS	-	-	-	-	•	•	•
Super Talent	WB160UX6G8(XMP)	6GB(3 x 2GB)	DS	-	-	8	-	•	•	•
Cell Shock	CS322271	2GB(2 x 1GB)	DS	-	-	7-7-7-14	1.7-1.9	•		•
EK Memory	EKM324L28BP8-I16(XMP)	4GB(2 x 2GB)	DS	-	-	9	-	•	•	•
Elixir	M2Y2G64CB8HA9N-DG(XMP)	2GB	DS	-	-	-	-	•	•	•
Mushkin	996657	4GB(2 x 2GB)	DS	-	-	7-7-7-20	-	•	•	•
Mushkin	998659(XMP)	6GB(3 x 2GB)	DS	-	-	9-9-9-24	1.5-1.6	•
Patriot	PVT33G1600ELK	3GB(3 x 1GB)	SS	-	-	9-9-9-24	1.65	•	•	•
PATRIOT	PGS34G1600LLKA	4GB(2 x 2GB)	DS	-	-	7-7-7-20	1.7	•
Patriot	PVS34G1600ELK	4GB(2 x 2GB)	DS	-	-	9-9-9-24	1.8	•	•
Patriot	PVS34G1600LLK(XMP)	4GB(2 x 2GB)	DS	-	-	7-7-7-20	1.9	•
Patriot	PVS34G1600LLKN	4GB(2 x 2GB)	DS	-	-	7-7-7-20	2.0	•
Patriot	PVT36G1600ELK	6GB(3 x 2GB)	DS	-	-	9-9-9-24	1.65	•	•	•
Patriot	PVT36G1600ELK	6GB(3 x 2GB)	DS	-	-	9-9-9-24	1.65	•	•	•
Patriot	PVT36G1600LLK(XMP)	6GB(3 x 2GB)	DS	-	-	8-8-8-24	1.65	•
Team	BoxP/N:TXD34096M1600HC6DC-L	4GB(2 x 2GB)	DS	-	-	6-7-6-18	1.65	•
	(TXD32048M1600HC6-L)(XMP)

1-10	ASUS M4N75TD

DDR3-1333MHz capability

Vendor	Part No.	Size	SS/	Chip	Chip NO.	Timing	Voltage	DIMM socket support
								(Optional)
			DS	Brand
								1 DIMM	2 DIMM	4 DIMM
A-DATA	AD3133301GOU	1GB	SS	A-DATA	AD30908C8D-15IG	-	-	•
A-DATA	AD31333002GOU	2GB	DS	A-DATA	AD30908C8D-15IG	-	-	•	•
A-DATA	AD3U1333B2G9-2	2GB	DS	A-DATA	AD30908C8D-15IG	-	-	•	•
A-DATA	AX3U1333PB2G7-2P	4GB(2 x 2GB)	DS	-	-	7-7-7-20	1.65-1.85	•	•	•
A-DATA	AD3U1333C4G9-B	4GB	DS	Hynix	H5TQ2G83AFRH9C	1333-9-9-9-24	-	•	•	•
A-DATA	AD31333E002G0U	6GB(3 x 2GB)	DS	-	-	7-7-7-20	1.65-1.85	•	•	•
A-DATA	AX3U1333PB2G7-3P	6GB(3 x 2GB)	DS	-	-	7-7-7-20	1.65-1.85	•	•	•
Apacer	78.A1GC6.9L1	2GB	DS	Apacer	AM5D5808DEWSBG	9	-	•	•	•
CORSAIR	TR3X3G1333C9 (Ver2.1)	3GB(3 x 1GB)	SS	-	-	9-9-9-24	1.5	•	•	•
CORSAIR	CM3X1024-1333C9DHX	1GB	DS	-	-	-	1.1	•	•
CORSAIR	BoxP/N:TWIN3X2048-1333C9	2GB(2 x 1GB)	DS	-	-	9-9-9-24	1.70	•	•	•
	(CM3X1024-1333C9)Ver1.1
CORSAIR	CM3X2G1333C9	2GB	DS	-	-	9-9-9-24	1.5	•	•	•
CORSAIR	BoxP/N:TW3X4G1333C9DHX	4GB(2 x 2GB)	DS	-	-	9-9-9-24	1.70	•	•
	(CM3X2048-1333C9DHX)Ver3.2
CORSAIR	TR3X6G1333C9 (Ver2.1)	6GB(3 x 2GB)	DS	-	-	9-9-9-24	1.5	•	•	•
CORSAIR	CMX8GX3M4A1333C9	8GB(4 x 2GB)	DS	-	-	9-9-9-24	1.5	•	•	•
Crucial	CT12864BA1339.8FF	1GB	SS	MICRON	D9KPT	9	-	•	•	•
Crucial	CT12864BA1339.8SFD	1GB	SS	MICRON	MT8JF12864AY-1G4D1	-	-	•	•	•
Crucial	CT12872BA1339.9FF	1GB	SS	MICRON	D9KPT(ECC)	9	-	•	•	•
Crucial	BL25664BN1337.16FF(XMP)	2GB	DS	-	-	7-7-7-24	1.65	•	•	•
Crucial	CT25664BA1339.16FF	2GB	DS	MICRON	D9KPT	9	-	•	•	•
Crucial	CT25664BA1339.16SFD	2GB	DS	MICRON	D9JNM	-	-	•	•	•
Crucial	CT25672BA1339.18FF	2GB	DS	MICRON	D9KPT(ECC)	9	-	•	•
Crucial	BL25664BA1336.16SFB1	4GB(2 x 2GB)	DS	NA	-	6-6-6-20	1.8	•	•	•
ELPIDA	EBJ10UE8BAW0-DJ-E	1GB	SS	ELPIDA	J1108BABG-DJ-E	9	-	•	•	•
ELPIDA	EBJ10UE8BDF0-DJ-F	1GB	SS	ELPIDA	J1108BDSE-DJ-F	-	-	•	•	•
ELPIDA	EBJ10UE8EDF0-DJ-F	1GB	SS	ELPIDA	J1108EDSE-DJ-F	-	-	•	•	•
ELPIDA	EBJ21UE8BAW0-DJ-E	2GB	DS	ELPIDA	J1108BABG-DJ-E	9	-	•	•
ELPIDA	EBJ21UE8BDF0-DJ-F	2GB	DS	ELPIDA	J1108BDSE-DJ-F	-	-	•	•	•
ELPIDA	EBJ21UE8EDF0-DJ-F	2GB	DS	ELPIDA	J1108EDSE-DJ-F	-	-	•	•	•
G.SKILL	F3-10600CL8D-2GBHK	2GB(2 x 1GB)	SS	-	-	-	1.65	•	•	•
G.SKILL	F3-10666CL7T-6GBPK(XMP)	2GB	DS	-	-	7-7-7-18	1.5-1.6	•	•	•
G.SKILL	F3-10666CL7D-4GBPI(XMP)	4GB(2 x 2GB)	DS	-	-	7-7-7-21	1.5	•	•	•
G.SKILL	F3-10666CL7D-4GBRH(XMP)	4GB(2 x 2GB)	DS	-	-	7-7-7-21	1.5	•	•	•
G.SKILL	F3-10666CL8D-4GBECO(XMP)	4GB(2 x 2GB)	DS	-	-	8-8-8-24	1.35	•	•	•
G.SKILL	F3-10666CL8D-4GBHK(XMP)	4GB(2 x 2GB)	DS	-	-	8-8-8-21	1.5-1.6	•	•	•
G.SKILL	F3-10666CL8D-4GBRM(XMP)	4GB(2 x 2GB)	DS	-	-	8-8-8-21	1.5-1.6	•	•	•
G.SKILL	F3-10666CL9T-6GBNQ	6GB(3 x 2GB)	DS	-	-	9-9-9-24	1.5	•	•	•
GEIL	GG34GB1333C9DC	4GB(2 x 2GB)	DS	GEIL	GL1L128M88BA12N	9-9-9-24	1.3	•	•
GEIL	GV34GB1333C7DC	4GB(2 x 2GB)	DS	-	-	7-7-7-24	1.5		•	•
Hynix	HMT112U6BFR8C-H9	1GB	SS	Hynix	H5TQ1G83BFR	9	-	•	•	•
Hynix	HMT125U6BFR8C-H9	2GB	DS	Hynix	H5TQ1G83BFR	9	-	•	•	•
Hynix	HMT125U6BFR8C-H9	2GB	DS	Hynix	H5TQ1G83BFRH9C	9	-	•	•	•
KINGMAX	FLFD45F-B8KG9	1GB	SS	KingMax	KFB8FNGBF-ANX-15A		-	•	•	•
KINGMAX	FLFE85F-B8KG9	2GB	DS	KingMax	KFB8FNGBF-ANX-15A		-	•	•	•
KINGSTON	KVR1333D3N9/1G	1G	SS	Kingston	D1288JELDPGD9U	-	1.5	•	•	•
KINGSTON	KVR1333D3N9/2G	2GB	DS	Qimonda	IDSH1G-03A1F1C-13H	9	1.5	•	•	•
KINGSTON	KVR1333D3E9S/4G	4GB	DS	SAMSUNG	K4B2G0846B-HCH9	-	1.5	•	•	•
KINGSTON	KVR1333D3N9/4G	4GB	DS	SAMSUNG	K4B2G0846B-HCH9	9	1.5	•		•
MICRON	MT8JTF12864AZ-1G4F1	1GB	SS	MICRON	9FF22 D9KPT	9	-	•	•	•
MICRON	MT8JTF12864AZ-1G4F1	1GB	SS	MICRON	D9KPT	9	-	•	•	•
MICRON	MT9JSF12872AZ-1G4F1	1GB	SS	MICRON	D9KPT(ECC)	9	-	•	•	•
MICRON	MT16JF25664AZ-1G4F1	2GB	DS	MICRON	D9KPT	9	-	•	•	•
MICRON	MT16JTF25664AZ-1G4F1	2GB	DS	MICRON	9FF22 D9KPT	9	-	•	•	•
MICRON	MT18JSF25672AZ-1G4F1	2GB	DS	MICRON	D9KPT(ECC)	9	-	•	•
OCZ	OCZ3P1333LV3GK	3GB(3 x 1GB)	SS	-	-	7-7-7	1.65			•
OCZ	OCZ3G1333ULV4GK	4GB(2 x 2GB)	DS	-	-	8-8-8	1.65	•
OCZ	OCZ3P1333LV4GK	4GB(2 x 2GB)	DS	-	-	7-7-7	1.65	•	•	•
OCZ	OCZ3G1333LV6GK	6GB(3 x 2GB)	DS	-	-	9-9-9	1.65			•
OCZ	OCZ3P1333LV6GK	6GB(3 x 2GB)	DS	-	-	7-7-7	1.65	•

Chapter 1: Product introduction

1-11

DDR3-1333MHz capability (continued)

Vendor	Part No.	Size	SS/	Chip	Chip NO.	Timing	Voltage	DIMM socket support
								(Optional)
			DS	Brand
								1 DIMM	2 DIMM	4 DIMM
OCZ	OCZX1333LV6GK(XMP)	6GB(3 x 2GB)	DS	NA	-	8-8-8	1.6	•	•	•
PSC	AL7F8G73D-DG1	1GB	SS	PSC	A3P1GF3DGF	-	-	•	•	•
PSC	AL8F8G73D-DG1	2GB	DS	PSC	A3P1GF3DGF	-	-	•	•	•
SAMSUNG	M378B2873DZ1-CH9	1GB	SS	SAMSUNG	K4B1G0846D	9	-	•	•	•
SAMSUNG	M378B2873EH1-CH9	1GB	SS	SAMSUNG	K4B1G0846E	-	-	•	•	•
SAMSUNG	M391B2873DZ1-CH9	1GB	SS	SAMSUNG	K4B1G0846D(ECC)	9	-	•	•	•
SAMSUNG	M378B5673DZ1-CH9	2GB	DS	SAMSUNG	K4B1G0846D	9	-	•	•	•
SAMSUNG	M378B5673EH1-CH9	2GB	DS	SAMSUNG	K4B1G0846E	-	-	•	•	•
SAMSUNG	M391B5673DZ1-CH9	2GB	DS	SAMSUNG	K4B1G0846D(ECC)	9	-	•	•	•
SAMSUNG	M378B5273BH1-CH9	4GB	DS	SAMSUNG	K4B2G0846B-HCH9	9	-	•	•	•
Super	W1333UX2G8(XMP)	2GB(2 x 1GB)	SS	-	-	8	1.8	•	•	•
Talent
Asint	SLY3128M8-EDJ	1GB	SS	Asint	DDRIII1208-DJ	-	-	•	•	•
Asint	SLY3128M8-EDJE	1GB	SS	ELPIDA	J1108BASE-DJ-E	-	-	•	•
Asint	SLZ3128M8-EDJ	2GB	DS	Asint	DDRIII1208-DJ	-	-	•	•	•
Asint	SLZ3128M8-EDJE	2GB	DS	ELPIDA	J1108BASE-DJ-E	-	-	•	•	•
ASUS	N/A	1GB	DS	-	-	-	-		•	•
ATP	AQ28M64A8BJH9S	1GB	SS	SAMSUNG	K4B1G0846E	-	-	•	•	•
ATP	AQ28M72D8BJH9S	1GB	SS	SAMSUNG	K4B1G0846D(ECC)	-	-	•	•	•
ATP	AQ56M64B8BJH9S	2GB	DS	SAMSUNG	K4B1G0846D	-	-	•	•	•
ATP	AQ56M72E8BJH9S	2GB	DS	SAMSUNG	K4B1G0846D(ECC)	-	-	•		•
BUFFALO	FSH1333D3G-T3G(XMP)	3GB(3 x 1GB)	SS	-	-	7-7-7-20	-	•	•	•
EK Memory	EKM324L28BP8-I13	4GB(2 x 2GB)	DS	-	-	9	-	•	•
Elixir	M2Y2G64CB8HA9N-CG	2GB	DS	-	-	-	-	•	•
Elixir	M2Y2G64CB8HC9N-CG	2GB	DS	-	-	-	-	•	•
Patriot	PVT33G1333ELK	3GB(3 x 1GB)	SS	-	-	9-9-9-24	1.65	•	•	•
Patriot	PVS34G1333ELK	4GB(2 x 2GB)	DS	-	-	9-9-9-24	1.5
Patriot	PVS34G1333LLK	4GB(2 x 2GB)	DS	-	-	7-7-7-20	1.7	•	•
Patriot	PVT36G1333ELK	6GB(3 x 2GB)	DS	-	-	9-9-9-24	1.65	•	•
Silicon	SP001GBLTU1333S01	1GB	SS	NANYA	NT5CB128M8AN-CG	-	-	•		•
Power
Silicon	SP001GBLTU133S02	1GB	SS	S-POWER	I0YT3E0	9	-	•
Power
Silicon	SP002GBLTU133S02	2GB	DS	S-POWER	I0YT3E0	9	-	•	•	•
Power
UMAX	E41302GP0-73BDB	2GB	DS	UMAX	U2S24D30TP-13		-	•	•

1-12	ASUS M4N75TD