1
Component AV Cable
Use the Component AV Cable to connect your iPod to the component video and
analog audio ports on your TV, home theater receiver, or stereo receiver. The
Component AV Cable features a USB connector that you can plug into a power
source, such as a computer or the included USB Power Adapter.
Before you begin connecting components, turn down the volume on iPod and turn off
the power to all your components. Remember to make all connections firmly to avoid
humming and noise.
Important:
Never force a connector into a port. If the connector and port don’t join
with reasonable ease, they probably don’t match. Make sure that the connector
matches the port and that you have positioned the connector correctly in relation to
the port.
To use the Component AV Cable to connect iPod to your TV or receiver:
1
Plug the red, green, and blue video connectors into the component video input
(Y, Pb, and Pr) ports on your TV or receiver.
2
Plug the white and red audio connectors into the left and right analog audio input
ports, respectively, on your TV or receiver.
3
Plug the iPod Dock Connector into your iPod or Universal Dock.
4
Plug the USB connector into your USB Power Adapter or your computer to keep your
iPod charged.
2
English
5
Turn on iPod and your TV or receiver to start playing.
Make sure you set your iPod to send a video signal out to your TV or receiver. For more
information, see the features guide for your iPod.
USB Power
USB Power
USB Power
Adapter
Adapter
Adapter
iPod Left audio (white)
iPod Left audio (white)
iPod Left audio (white)
USB
USB
USB
connector
connector
connector
Right audio (red)
Right audio (red)
Right audio (red)
Dock Connector
Dock Connector
Dock Connector
Video in (Y, Pb, Pr)
Video in (Y, Pb, Pr)
Video in (Y, Pb, Pr)
Television
Television
Television
The ports on your TV or receiver may differ from the ports in the illustration.
Note:
If your iPod doesn’t support video, you can use the Component AV Cable for
audio output, syncing content, and charging.
English
3