Apple A1254 Users Manual

AirPort Extreme

Setup Guide

Contents

4 Chapter 1: Getting Started

About AirPort Extreme

About the AirPort Software

What You Need to Get Started

AirPort Extreme Status Light

11 Chapter 2: AirPort Extreme Networks

Using AirPort Extreme with Your Broadband Internet Service

Using AirPort Extreme to Share a USB Printer

Using AirPort Extreme to Share USB Hard Disks

Using AirPort Extreme with Your AirPort Network

20 Chapter 3: Setting Up AirPort Extreme

Using AirPort Utility

Creating a New Wireless Network

Configuring and Sharing Internet Access

Allowing Wireless Clients Access to Your Network

Setting Advanced Options

26 Chapter 4: Tips and Troubleshooting

You Can’t Connect to the Internet

You Forgot Your Network or Base Station Password

Your AirPort Extreme Isn’t Responding

Your AirPort Extreme Status Light Flashes Amber

Your Printer Isn’t Responding

Updating AirPort Software

AirPort Extreme Placement Considerations

Items That Can Cause Interference with AirPort

32 Chapter 5: Learning More, Service, and Support

34 Appendix: AirPort Extreme Specifications and Safety Guidelines

Contents

Getting Started

Congratulations on purchasing AirPort Extreme. Read this guide to get started.

AirPort Extreme is based on an Institute of Electrical and Electronics Engineers (IEEE) draft 802.11n specification and provides better performance and greater range than previous IEEE 802.11 standards. AirPort Extreme is compatible with computers using

802.11b, and 802.11g, as well as computers using the 802.11a and 802.11n wireless standards.

With AirPort Extreme, you can:

Create a wireless network in your home, and then connect to the Internet and share the connection with multiple computers simultaneously. An entire family or office can be connected to the Internet at the same time.

Connect AirPort Extreme to your Ethernet network. Wireless-equipped Macintosh computers, Windows XP, or Windows Vista computers can then have access to an entire network without being connected by a cable.

Connect a supported USB printer to your AirPort Extreme. All of the compatible computers on the AirPort network, both wireless and wired, can print to it.

Connect a USB hard disk to your AirPort Extreme. All of the compatible computers on the AirPort network, both wireless and wired, can access the information on the hard disk.

Connect a USB hub to your AirPort Extreme, and then connect multiple USB devices, such as printers or hard disks. All of the computers on the network have access to those devices.

Important:

Install AirPort Utility 5.2 from the CD that came with your AirPort Extreme

802.11n Base Station and use it to set up your base station. Previous versions of the AirPort Setup Assistant and AirPort Admin Utility are not compatible with this base station.

About AirPort Extreme

AirPort Extreme has five ports, located on the back:

One 10/100/1000Base-T Gigabit Ethernet Wide Area Network (WAN) port (< connecting a DSL or cable modem, or for connecting to an existing Ethernet network

Three 10/100/1000Base-T Gigabit Ethernet Local Area Network (LAN) ports (G connecting Ethernet devices, such as printers or computers, or for connecting to an existing Ethernet network

Chapter 1

) for

Getting Started

One USB port (d

) for connecting a compatible USB printer, hard disk, or hub for

connecting several devices

Status light Internet WAN port

Ethernet ports Reset button

Power port USB port

AC adapter

Next to the ports is a reset button, which is used for troubleshooting your AirPort Extreme. The status light on the front of AirPort Extreme shows the current status.

About the AirPort Software

AirPort Extreme works with the AirPort software included on the AirPort Extreme CD.

Install the AirPort Utility software that came on the CD and follow the instructions on the following pages to set up your AirPort Extreme and your AirPort wireless network.

6 Chapter 1

Getting Started

Security slot

Note:

You must use AirPort Utility to set up this base station. The AirPort Extreme

802.11n Base Station is not compatible with previous versions of AirPort software.

AirPort Utility

AirPort Utility helps you set up your AirPort Extreme to create a wireless network, connect to the Internet, and share compatible USB printers and hard disks. You can also connect your AirPort Extreme to your existing AirPort Extreme or AirPort Extreme wireless network to extend the range of your network using a Wireless Distribution System (WDS). Use AirPort Utility to quickly and easily set up your AirPort Extreme and your wireless network.

AirPort Utility is also an advanced tool for setting up and managing AirPort Extreme and AirPort Express Base Stations. Use AirPort Utility to manually adjust network, routing, and security settings and other advanced options.

AirPort status menu in the menu bar

Use the AirPort status menu to switch quickly between AirPort networks, monitor the signal quality of the current network, create a computer-to-computer network, and turn AirPort on and off. The status menu is available on computers using Mac OS X.

What You Need to Get Started

To use AirPort Extreme you need a wireless-enabled computer that is compliant with the IEEE 802.11a, 802.11b, or 802.11g standards, or with an IEEE 802.11n draft specification. To set up AirPort Extreme, your computer must meet the requirements listed below.

To set up AirPort Extreme using a Macintosh, you need the following:

A Macintosh computer with an AirPort or AirPort Extreme Card installed to set it up wirelessly, or a Macintosh computer connected to AirPort Extreme with an Ethernet cable to set it up using Ethernet

Chapter 1

Getting Started

Mac OS X v10.4 or later

AirPort Utility 5.2 or later

To set up AirPort Extreme using a Windows PC, you need the following:

A Windows PC with 300 MHz or higher processor speed and a compatible 802.11 wireless card

Windows XP Home or Professional (with Service Pack 2 installed) or Windows Vista

AirPort Utility v5.2 or later

Plugging In AirPort Extreme

Before you plug in your AirPort Extreme, first connect the appropriate cables to the ports you want to use, including:

Connect the Ethernet cable that is connected to your DSL or cable modem (if you will connect to the Internet) to the Ethernet (WAN) port (<

Connect a USB cable connected from the USB port (d compatible USB printer (if you will print to a USB printer), a hard disk, or a hub.

Connect an Ethernet cable from any Ethernet device to the Ethernet LAN ports (G

8 Chapter 1

Getting Started

) on AirPort Extreme to a

After you have connected the cables for all the devices you plan to use, connect the AC plug adapter to the power port, and plug AirPort Extreme into the wall. There is no “on” switch.

Power port Ethernet activity light

AC adapter

Important:

Use only the AC adapter that came with your AirPort Extreme.

When you plug the AirPort Extreme AC adapter into the wall, the status light flashes green for one second, and then glows amber while it starts up. After it has started up completely, the status light flashes amber. The status light glows solid green after AirPort Extreme is properly set up and connected to the Internet or a network.

When you connect Ethernet cables to the Ethernet ports, the lights above them glow solid.

Chapter 1

Getting Started

AirPort Extreme Status Light

The following table explains AirPort Extreme light sequences and what they indicate.

Light Status/description

Off

Flashing green

Solid green

Flashing amber

Solid amber

Flashing amber and green

Solid blue

What’s Next

After you plug in AirPort Extreme, use AirPort Utility to set it up to work with your Internet connection, USB printer or hard disk, or an existing network. AirPort Utility is located in the Utilities folder in the Applications folder on a computer using Mac OS X, and in Start > All Programs > AirPort on a computer using Windows XP or Windows Vista.

10 Chapter 1

Getting Started

AirPort Extreme is unplugged.

AirPort Extreme is starting up. The light flashes for one second.

AirPort Extreme is on and working properly. If you choose Flash On Activity from the Status Light pop-up menu (on the Base Station pane of AirPort settings in AirPort Utility), the status light may flash green to indicate normal activity.

AirPort Extreme cannot establish a connection to the network or the Internet, or is encountering a problem. Make sure you have installed AirPort Utility and use it to get information about what might cause the status light to flash amber. See “Your AirPort Extreme Status Light Flashes Amber” on page 28.

AirPort Extreme is completing its startup sequence.

There may be a problem starting up. AirPort Extreme will restart and try again.

The base station is ready to allow a wireless client access to the network. See “Allowing Wireless Clients Access to Your Network” on page 24.

AirPort Extreme Networks

In this chapter you’ll find explanations of the different ways you can use AirPort Extreme.

This chapter provides some examples of the different kinds of networks you can set up using AirPort Extreme. It provides diagrams and explanations of what you need to do to get your AirPort Extreme network up and running quickly.

See Chapter 3, “Setting Up AirPort Extreme,” on page 20 to find out more about using AirPort Utility to help set up your network.

See the document “Designing AirPort Networks Using AirPort Utility” for detailed information about AirPort networks and AirPort Extreme. The document is located on the AirPort CD and at www.apple.com/support/manuals/airport.

Using AirPort Extreme with Your Broadband Internet Service

When you set up AirPort Extreme to provide network and Internet access, Macintosh computers with AirPort and AirPort Extreme Cards, and 802.11a, 802.11b, 802.11g, and IEEE 802.11n draft specification wireless-equipped computers, can access the wireless AirPort network to share files, play games, and use Internet applications like web browsers and email applications.

It looks like this:

12 Chapter 2

DSL or cable modem

AirPort Extreme Networks

Internet WAN port

to Internet

+ 28 hidden pages