User Manual
Smart-UPSTM C
Uninterruptible Power Supply
SRC250
SRC450
110/120/230 Vac
Tower/Rack-Mount 1U
Smart-UPSTM C
Uninterruptible Power Supply
250/450 VA
110/120/230 Vac
Tower/Rack-Mount 1U
English
990-1852D, 10/2014
Introduction
The APCTM by Schneider Electric Smart-UPSTM Uninterruptible Power Supply (UPS) is designed to prevent blackouts, brownouts, sags, and surges from reaching your equipment. The uninterruptible power supply (UPS) filters small utility line fluctuations and isolates your equipment from large disturbances by internally disconnecting from the utility line. The UPS provides continuous power from its internal battery until the utility line returns to safe levels or the battery is fully discharged.
1:INSTALLATION
Unpack
Attention: Read the safety instruction sheet before installation.
Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage. The packaging is recyclable; save it for reuse or dispose of it properly. Check the package contents:
Attention: The UPS comes with battery disconnected.
UPS
UPS literature kit containing:
Product documentation, safety and warranty information
Documentation CD
PowerChuteTM Business Edition CD
Serial communication cable
Rack-mounting hardware
230 V models: Two jumper cables
Position the UPS
1
Rack-Mounting |
|
n |
o |
p |
q Two-post rack-mounting: Utilize the bracket |
|
holes that are offset 6.25”. |
rSecure clip nuts to the rack, and attach |
s |
brackets with provided screws. |
|
2
t |
u |
Tower Configuration
Attention: Connect the battery before tower setup by referring to applicable steps in
Rack-Mounting.
3
Wall Mounting
Attention: Connect the battery before mounting by referring to applicable steps in
Rack-Mounting.
To avoid a safety hazard, do not mount the unit on the wall with the bezel facing downwards, or with the display panel at the bottom.
n
o Note: Whenever possible, attach two screws into wall studs. If stud mounting is not possible, use an expandable wall anchor. Hardware is not included; .25” x 2” lag bolts are recommended. Mount the UPS in either of the displayed positions.
Display
Panel
4
Loading...