FAVORIT 45003
User manual |
Dishwasher |
2 Contents
Thank you for choosing one of our high-quality products.
To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
CONTENTS
OPERATING INSTRUCTIONS |
3 |
|
MULTITAB FUNCTION |
16 |
|
SAFETY INFORMATION |
3 |
|
WASHING PROGRAMMES |
17 |
|
Correct use |
3 |
|
SELECT AND START A WASHING PROGRAMME |
||
General safety |
3 |
|
|
18 |
|
Child safety |
3 |
|
|
|
|
|
Interrupting a washing programme |
19 |
|||
Installation |
4 |
|
|||
|
Cancelling a washing programme |
19 |
|||
PRODUCT DESCRIPTION |
4 |
|
|||
|
Setting and starting a washing programme |
||||
CONTROL PANEL |
5 |
|
with delay start |
19 |
|
|
|
|
Cancelling a delay start |
19 |
|
Programme knob |
6 |
||||
|
End of the washing programme |
19 |
|||
Multitab button |
6 |
|
|||
|
Standby mode |
20 |
|||
Delay start button |
6 |
|
|||
|
Removing the load |
20 |
|||
Start button |
6 |
|
|||
|
CARE AND CLEANING |
20 |
|||
Digital display |
6 |
|
|||
Function buttons |
7 |
|
Cleaning the filters |
20 |
|
Setting mode |
7 |
|
External cleaning |
21 |
|
USE OF THE APPLIANCE |
7 |
|
Frost precautions |
21 |
|
|
|
|
WHAT TO DO IF… |
21 |
|
SETTING THE WATER SOFTENER |
7 |
||||
|
TECHNICAL DATA |
23 |
|||
Manual adjustment |
8 |
|
|||
Electronic adjustment |
8 |
|
INSTALLATION INSTRUCTIONS |
23 |
|
USE OF DISHWASHER SALT |
9 |
|
|
|
|
|
INSTALLATION |
23 |
|||
USE OF RINSE AID |
9 |
|
|||
|
Fitting under a counter |
23 |
|||
Adjusting the rinse aid dosage |
10 |
|
Do these steps to remove the appliance |
|
|
LOADING CUTLERY AND DISHES |
11 |
|
worktop: |
24 |
|
|
|
|
Adjusting the level of the appliance |
24 |
|
Helpful hints and tips |
11 |
||||
|
WATER CONNECTION |
25 |
|||
Lower basket |
11 |
|
|||
Cutlery basket |
12 |
|
Water inlet hose |
25 |
|
Upper basket |
13 |
|
Water drain hose |
25 |
|
Adjustment of the height of the upper |
|
|
ELECTRICAL CONNECTION |
26 |
|
basket |
14 |
|
|
|
|
|
ENVIRONMENT CONCERNS |
26 |
|||
USE OF DETERGENT |
15 |
|
|||
|
|
|
Subject to change without notice
Safety information |
3 |
|
|
OPERATING INSTRUCTIONS
SAFETY INFORMATION
For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance.
Correct use
•The appliance is designed exclusively for domestic use.
•Only use the appliance to clean household utensils that are applicable for dishwashers.
•Do not put solvents in the appliance. Risk of explosion.
•Put the knives and all items with sharp points in the cutlery basket with their points down. If not, put in a horizontal position in the upper basket.
•Use only branded products for dishwashers (detergent, salt, rinse aid).
•If you open the door while the appliance is in operation, hot steam can escape. Risk of skin burns.
•Do not remove dishes from the dishwasher before the end of the washing programme.
•When the washing programme is completed, disconnect the mains plug from the mains socket and close the water tap.
•Only an authorised service engineer can repair this appliance. Use only original spare parts.
•Do not do repairs yourself to prevent injury and damage to the appliance. Always contact your local Service Force Centre.
General safety
•Persons (including children) with reduced physical sensory, mental capabilities or lack of experience and knowledge must not use the appliance. They must have supervision or instruction for the operation of the appliance by a person responsible for their safety.
•Obey the safety instructions from the manufacturer of the dishwasher detergent to prevent burns to eyes, mouth and throat.
•Do not drink the water from the dishwasher. Detergent residues can stay in your appliance.
•Always close the door when you do not use the appliance to prevent injury and not to stumble over the open door.
•Do not sit or stand on the open door.
Child safety
•Only adults can use this appliance. Children must get supervision to make sure that they do not play with the appliance.
•Keep all the packaging away from children. There is a risk of suffocation.
•Keep all detergents in a safe area. Do not let children touch the detergents.
•Keep children away from the appliance when the door is open.
4 Product description
Installation
•Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If necessary, contact the supplier.
•Remove all packaging before first use.
•A qualified and competent person must do the electrical installation.
•A qualified and competent person must do the plumbing installation.
•Do not change the specifications or modify this product. Risk of injury and damage to the appliance.
•Do not use the appliance:
–if the mains cable or water hoses are damaged,
–if the control panel, worktop or plinth area are damaged, that you can get access to
the inner side of the appliance. Contact your local Service Force Centre.
•Do not drill into the sides of the appliance to prevent damage to hydraulic and electrical components.
WARNING!
Carefully obey the instructions for electrical and water connections.
PRODUCT DESCRIPTION
Control panel |
5 |
|
|
1Upper basket
2Water hardness dial
3Salt container
4Detergent dispenser
5Rinse aid dispenser
6Rating plate
7Filters
8Lower spray arm
9Upper spray arm 10 Worktop
CONTROL PANEL
8 |
7 |
6 |
5 |
1 2 3 4
A B
9
1Programme knob
2Multitab button (MULTITAB)
3Delay start button (DELAY)
4Start button (START)
5Digital display
6Indicator lights
7Programme marker
8Off position
9Function buttons
6 |
Control panel |
|
|
|
|
|
|
|
|
|
|
|
|
|
Indicator lights |
|
|
|
|
|
Wash phase |
|
Comes on when the washing phase or the rinsing phase operates. |
|
|
|
|
|
|
|
|
|
Dry phase |
|
Comes on when the drying phase operates. |
|
|
|
|
|
|
|
|
|
Multitab |
|
Comes on when you activate the multitab function Refer to 'Multitab |
|
|
|
function'. |
|
|
|
|
|
|
|
|
|
Salt 1) |
|
Comes on when it is necessary to fill the salt container. Refer to 'Use of |
|
|
|
dishwasher salt'. |
|
|
|
After you fill the container, the salt indicator light can continue to stay |
|
|
|
on for some hours. This does not have an unwanted effect on the operation |
|
|
|
of the appliance. |
|
|
|
|
|
Rinse aid 1) |
|
Comes on when it is necessary to fill the rinse aid container. Refer to 'Use |
|
|
|
of rinse aid'. |
|
|
|
|
1)When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing programme operates.
Programme knob
•To switch on the appliance or to set a washing programme, turn the programme knob clockwise or counterclockwise. The programme marker on the programme knob must agree with one of the washing programmes on the control panel. If the programme marker agrees with a washing programme, the digital display shows the time duration of the programme. If the programme marker does not agree with a washing programme, the digital display shows two horizontal bars.
•To switch off the appliance, turn the programme knob until the programme marker agrees with the off indicator.
Use the programme knob for these operations:
–To set the water softener. Refer to 'Setting the water softener'.
–To deactivate/activate the rinse aid dispenser. Refer to 'Multitab function'.
Multitab button
Press this button to activate/deactivate the multitab function. Refer to the chapter 'Multitab function'.
Delay start button
Use the delay start button to delay the start of the washing programme with an interval between 1 and 19 hours. Refer to the chapter 'Setting and starting a washing programme'.
Start button
Use this button to start the washing programme. Refer to the chapter 'Setting and starting a washing programme'.
Digital display
The display shows:
•Adjusted level of the water softener.
•Activation/deactivation of the rinse aid dispenser (only with multitab function on).
Use of the appliance |
7 |
|
|
•Programme duration.
•Remaining time to the end of the programme.
•End of a washing programme, the digital display shows a zero.
•Number of hours in delay start.
•Fault codes.
Function buttons
Use the function buttons for these operations:
•To set the water softener. Refer to the chapter 'Setting the water softener'.
•To cancel the washing programme in progress or a delay start in progress. Refer to the chapter 'Setting and starting a washing programme'.
•To deactivate/activate the rinse aid dispenser, when multitab function is active. Refer to the chapter 'Multitab function'.
Setting mode
The appliance is in setting mode when:
•One or more phase indicator lights are on.
•The time duration of the programme flashes in the digital display. The appliance must be in setting mode for these operations:
–To set a washing programme.
–To set the water softener level.
–To deactivate/activate the rinse aid dispenser. The appliance is not in setting mode when:
• One or more phase indicator lights are on.
• The time duration of the programme does not flash.
In this condition cancel the programme to go back to the setting mode. Refer to the chapter 'Setting and starting a washing programme'.
USE OF THE APPLIANCE
Refer to the following instructions for each step of procedure:
1.Make a check if the water softener level is correct for the water hardness in your area. If necessary set the water softener.
2.Fill the salt container with dishwasher salt.
3.Fill the rinse aid dispenser with rinse aid.
4.Load cutlery and dishes into the dishwasher.
5.Set the correct washing programme for the type of load and soil.
6.Fill the detergent dispenser with the correct quantity of detergent.
7.Start the washing programme.
If you use combi detergent tablets ('3 in 1', '4 in 1', '5 in 1', etc.), refer to the chapter 'Multitab function'.
SETTING THE WATER SOFTENER
The water softener removes minerals and salts from the water supply. Minerals and salts can have bad effect on the operation of the appliance.
8 Setting the water softener
Water hardness is measured in equivalent scales:
•German degrees (dH°).
•French degrees (°TH).
•mmol/l (millimol per litre - international unit for the hardness of water).
•Clarke.
Adjust the water softener to the water hardness in your area. If necessary, contact your local water authority.
|
Water hardness |
|
|
Water hardness setting |
|||
|
|
|
|
|
|
|
|
°dH |
°TH |
mmol/l |
Clarke |
|
manually |
|
electronically |
|
|
|
|
|
|
||
51 - 70 |
91 - 125 |
9,1 - 12,5 |
64 - 88 |
|
2 |
|
10 |
|
|
|
|
|
|
||
43 - 50 |
76 - 90 |
7,6 - 9,0 |
53 - 63 |
|
2 |
|
9 |
|
|
|
|
|
|
||
37 - 42 |
65 - 75 |
6,5 - 7,5 |
46 - 52 |
|
2 |
|
8 |
|
|
|
|
|
|
||
29 - 36 |
51 - 64 |
5,1 - 6,4 |
36 - 45 |
|
2 |
|
7 |
23 - 28 |
40 - 50 |
4,0 - 5,0 |
28 - 35 |
|
2 |
|
6 |
|
|
|
|
|
|
||
19 - 22 |
33 - 39 |
3,3 - 3,9 |
23 - 27 |
|
2 |
|
5 |
|
|
|
|
|
|
||
15 - 18 |
26 - 32 |
2,6 - 3,2 |
18 - 22 |
|
1 |
|
4 |
|
|
|
|
|
|
||
11 - 14 |
19 - 25 |
1,9 - 2,5 |
13 - 17 |
|
1 |
|
3 |
|
|
|
|
|
|
||
4 - 10 |
7 - 18 |
0,7 - 1,8 |
5 - 12 |
|
1 |
|
2 |
|
|
|
|
|
|
||
< 4 |
< 7 |
< 0,7 |
< 5 |
|
11) |
|
11) |
1) No use of salt required.
You must set the water softener manually and electronically.
Manual adjustment
The appliance is set at the factory at position 2.
1. Open the door.
2. Remove the lower basket.
3. Turn the water hardness dial to position 1 or 2 (refer to the chart).
4. Install the lower basket.
5. Close the door.
Electronic adjustment
The water softener is set at the factory at level 5.
The appliance must be switched off.
1.Press and hold function button A. Turn the programme knob counterclockwise until the programme marker agrees with the first washing programme on the control panel.
Use of dishwasher salt |
9 |
|
|
2.Release the function button A when the digital display shows the current setting. Examples:
–level 5 =
–level 10 =
3.Press function button A to change the water softener level. Every time you press the button, the level increases.
4.Turn the programme knob to the off position to save the operation.
USE OF DISHWASHER SALT
CAUTION!
Only use dishwashers salt. Types of salt that are not applicable for dishwashers cause damage to the water softener.
CAUTION!
Grains of salt and salty water on the bottom of the appliance can cause corrosion. Fill the appliance with salt before you start a washing programme to prevent corrosion.
Do these steps to fill the salt container:
1.Turn the cap anticlockwise to open the salt container.
2.Fill the salt container with 1 litre of water (only the first operation).
3. Use the funnel to fill the salt container with salt.
4. Remove the salt around the opening of the salt container.
5. Turn the cap clockwise to close the salt container.
It is normal that water overflows from the salt container when you fill it with salt.
When you set electronically the water softener to level 1, the salt indicator light does not stay on.
USE OF RINSE AID
CAUTION!
Only use branded rinse aid for dishwashers.
Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent, liquid detergent). This can cause damage to the appliance.
Rinse aid makes it possible to dry the dishes without streaks and stains.
Rinse aid is automatically added during the last rinsing phase.
Do these steps to fill the rinse aid dispenser: