FAVORIT 50870
User manual |
Dishwasher |
2
Dear Customer
Thank you for choosing one of our high-quality products.
With this appliance you will experience the perfect combination of functional design and cutting edge technology.
Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence.
In addition to this you find environmental and energy saving aspects as an integral part of our products.
To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
The following symbols are used in this user manual:
Important information concerning your personal safety and information on how to avoid damaging the appliance.
General information and tips
Environmental information
Contents |
3 |
|
|
Contents
Operating instructions |
5 |
|
|
Safety information |
5 |
|
|
Correct use |
5 |
General safety |
6 |
Child safety |
6 |
Installation |
6 |
Product description |
8 |
|
|
Control panel |
9 |
|
|
Setting mode |
10 |
First use |
11 |
|
|
Set the water softener |
11 |
|
|
Setting manually |
12 |
Setting electronically |
12 |
Filling with dishwasher salt |
13 |
|
|
Filling with rinse aid |
14 |
|
|
Adjusting the dosage of rinse aid |
15 |
|
|
Daily use |
15 |
|
|
Loading cutlery and dishes |
15 |
The lower basket |
17 |
The cutlery basket |
17 |
The upper basket |
18 |
Adjusting the height of the upper basket |
19 |
117987831-00-30052007
Use of detergent |
20 |
|
|
Fill with detergent |
21 |
Multi-tab function |
22 |
Activation/deactivation of the Multi-Tab function |
22 |
Washing programmes |
24 |
Select and start a washing programme |
24 |
|
|
Unloading the dishwasher |
26 |
|
|
4 |
|
Contents |
|
|
|
||
Care and cleaning |
27 |
||
|
|
|
|
|
Cleaning the filters |
27 |
|
|
Cleaning the spray arms |
28 |
|
|
External cleaning |
28 |
|
|
Internal cleaning |
28 |
|
|
Prolonged periods of non-operation |
29 |
|
|
Frost precautions |
29 |
|
|
Moving the machine |
29 |
|
Something not working |
29 |
||
|
|
|
|
Technical data |
32 |
||
|
|
|
|
Hints for test institutes |
32 |
||
|
|
|
|
Installation instructions |
34 |
||
|
|
|
|
Installation |
34 |
||
|
|
|
|
|
Fitting under a counter (kitchen worktop or sink) |
34 |
|
|
Levelling |
35 |
|
|
Water supply connections |
35 |
|
|
Water inlet hose with safety valve |
36 |
|
|
Water outlet hose connection |
37 |
|
|
Electrical connection |
38 |
|
Environment concerns |
38 |
||
|
|
|
|
|
Packaging material |
38 |
|
Guarantee/Customer Service |
40 |
||
|
|
|
|
Guarantee/Customer Service |
40 |
||
|
|
|
|
|
GREAT BRITAIN & IRELAND |
40 |
|
European Guarantee |
42 |
||
www.electrolux.com |
42 |
||
|
|
|
|
Safety information |
5 |
|
|
Operating instructions
Safety information
In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety.
Correct use
•This dishwasher is only intended for washing household utensils suitable for machine washing.
•Do not put any solvents in the dishwasher. This could cause an explosion.
•Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket.
•Only use products (detergent, salt and rinse aid) suitable for dishwashers.
•Avoid opening the door whilst the appliance is in operation, hot steam may escape.
•Do not take any dishes out of the dishwasher before the end of the dishwashing cycle.
•After use, isolate the appliance from the power supply and turn off the water supply.
•This product should be serviced only by an authorised service engineer, and only genuine spare parts should be used.
•Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons will cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.
6 Safety information
General safety
•Dishwasher detergents can cause chemical burns to eyes, mouth and throat. Could endanger life! Comply with the safety instructions of the dishwasher detergent manufacturer.
•The water in your dishwasher is not for drinking. Detergent residues may still be present in your machine.
•Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themselves.
•Do not sit or stand on the open door.
Child safety
•This appliance is designed to be operated by adults. Don’t allow children to use the dishwasher unsupervised.
•Keep all packaging well away from children. There is risk of suffocation.
•Keep all detergents in a safe place out of children’s reach.
•Keep children well away from the dishwasher when the door is open.
Installation
•Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged contact your supplier.
•All packaging must be removed before use.
•Any electrical and plumbing work required to install this appliance must be carried out by a qualified and competent person.
•For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way.
•Never use the dishwasher if the electrical supply cable and water hoses are damaged; or if the control panel, work top or plinth area are damaged such that the inside of the appliance is freely accessible. Contact your local Service Force centre, in order to avoid hazard.
•All sides of the dishwasher must never be drilled to prevent damage to hydraulic and electric components.
Safety information |
7 |
|
|
WARNING!
For electrical and water connection carefully follow the instructions given in specific paragraphs.
8 Product description
Product description
1.Upper basket
2.Water hardness dial
3.Salt container
4.Detergent dispenser
5.Rinse aid dispenser
6.Rating plate
7.Filters
8.Lower spray arm
9.Upper spray arm
10.Worktop
Control panel |
9 |
|
|
Control panel
1On/off button
2Programme selection buttons
3Delay start button
4Indicator lights
5Digital display
6Function buttons
|
Indicator lights |
|
|
|
|
Programme in progress |
|
Illuminates when a washing programme is set |
|
|
and remains illuminated for all the duration of |
|
|
the washing programme. |
MULTITAB |
|
Indicates the activation/deactivation of the |
|
|
Multi-tab function (see Multi-tab function) |
|
|
|
Salt |
|
Illuminates when the special salt has run out. 1) |
|
|
|
10 Control panel
|
Indicator lights |
|
Rinse aid |
|
Illuminates when the rinse aid has run out. 1) |
|
|
|
1)The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and/or rinse aid is necessary.
Function buttons
In addition to the programme selection, the setting of the water softener and the activation/deactivation of the rinse aid dispenser can also be set with the help of these buttons.
The digital display indicates:
•the level of hardness to which the water softener is set,
•the approximate remaining time of the running programme,
•activation/deactivation of the rinse aid dispenser (ONLY with Multi-tab function active),
•the end of a washing programme (a zero will appear in the digital display),
•the countdown of the delay start,
•fault codes concerning malfunction of the dishwasher.
Setting mode
The appliance is in setting mode when all programme lights are illuminated. Always remember that when performing operations such as:
•selecting a washing programme
•setting the water softener
•activating/deactivating the rinse aid dispenser the appliance MUST be in setting mode.
If a programme light is illuminated, the last performed programme is still set. In this case, to return to setting mode, the programme has to be cancelled.
To cancel a set programme or a programme in progress: simultaneously press and hold the two programme buttons positioned over the word RESET, until all the programme button lights will illuminate. The programme has been cancelled and the machine is now in setting mode.
First use 11
First use
Before using your dishwasher for the first time:
•Ensure that the electrical and water connections comply with the installation instructions
•Remove all packaging from inside the appliance
•Set the water softener
•Pour 1 litre of water inside the salt container and then fill with dishwasher salt
•Fill the rinse aid dispenser
If you want to use combi detergent tablets such as: "3 in 1", "4 in 1", "5 in 1" etc...
set the Multi-tab function (see "Multi-tab function").
Set the water softener
The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.
The higher the content of these minerals and salts, the harder your water is. Water hardness is measured in equivalent scales, Clarke degrees, French degrees (°TH) and mmol/l (millimol per litre - international unit for the hardness of water).
The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.
The water softener must be set in both ways: manually, using the water hardness dial and electronically.
|
Water hardness |
|
|
|
Adjusting the water hardness |
Use of salt |
||
|
|
|
|
|
|
setting |
|
|
Clarke |
|
°TH |
|
|
mmol/l |
manually |
electronically |
|
|
|
|
|
|
|
|
|
|
64 - 88 |
91 |
- 125 |
|
9,1 |
- 12,5 |
2 |
level 10 |
yes |
53 - 63 |
76 |
- 90 |
|
7,6 |
- 8,9 |
2 |
level 9 |
yes |
46 - 52 |
65 |
- 75 |
|
6,51 - 7,5 |
2 |
level 8 |
yes |
|
|
|
|
|
|
|
|
|
|
36 - 45 |
51 |
- 64 |
|
5,1 |
- 6,4 |
2 |
level 7 |
yes |
|
|
|
|
|
|
|
|
|
28 - 35 |
40 |
- 50 |
|
4,0 |
- 5,0 |
2 |
level 6 |
yes |
|
|
|
|
|
|
|
|
|
12 |
Set the water softener |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Water hardness |
|
|
Adjusting the water hardness |
Use of salt |
|
|
|
|
|
|
setting |
|
|
|
|
|
|
|
|
|
|
|
Clarke |
°TH |
|
mmol/l |
manually |
electronically |
|
|
|
|
|
|
|
|
|
|
23 - 27 |
33 - 39 |
|
3,3 - 3,9 |
2 |
level 5 |
yes |
|
18 - 22 |
26 - 32 |
|
2,61 - 3,2 |
1 |
level 4 |
yes |
|
13 - 17 |
19 - 25 |
|
1,9 - 2,5 |
1 |
level 3 |
yes |
|
5 - 12 |
7 - 18 |
|
0,71 - 1,8 |
1 |
level 2 |
yes |
|
|
|
|
|
|
|
|
|
< 5 |
< 7 |
|
< 0,7 |
1 |
level 1 |
no |
|
|
|
|
|
|
|
|
The water softener must be set in both ways: manually, using the water hardness dial and electronically.
Setting manually
The dishwasher is factory set at position 2.
1. Open the dishwasher door.
2. Remove the lower basket from the dishwasher.
3. Turn the water hardness dial to position 1 or 2 (see table).
4. Replace the lower basket.
Setting electronically
The dishwasher is factory set at level 5.
1.Press the On/Off button. The dishwasher must be in setting mode.
2.Press simultaneously and keep pressed buttons B and C, until the lights of buttons A, B and C start flashing.
3.Press button A, the lights of buttons B and C turn off while the light of button A goes on flashing. In the digital display is visible the current level.
Examples:
displayed = level 5 displayed = level 10
Filling with dishwasher salt |
13 |
|
|
4.To change the level, press button A. Each time the button is pressed the level changes. (For the selection of the new level see the chart)..
Examples: if the current level is 5, by pressing button A once, level 6 is selected. if the current level is 10, by pressing button A once, level 1 is selected.
5.To memorise the operation, switch off the dishwasher by pressing the On/Off button.
Filling with dishwasher salt
WARNING!
Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion.
To fill:
1.Open the door, remove the lower basket and unscrew the cap of the salt container by turning it anticlockwise.
2.Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time) .
3. Using the funnel provided, pour in the salt until the container is full.
4. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.
5. Replace the cap tightly turning it clockwise until it stops with a click.
Do not worry if water overflows from the unit when filling with salt, this is quite normal.
The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.
14 Filling with rinse aid
Filling with rinse aid
WARNING!
Only use branded rinse aid for dishwashers.
Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.
Rinse aid ensures thorough rinsing, and spot and streak free drying. Rinse aid is automatically added during the last rinse.
1. Open the container by pressing the release button (A).
2.Add the rinse aid in the container. The maximum level for filling is indicated
by "max".
The dispenser holds about 110 ml of rinse aid, which is sufficient for between 16 and 40 dishwashing cycles, depending upon the dosage setting.
3. Ensure that the lid is closed after every refill.
Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.
Adjusting the dosage of rinse aid 15
Adjusting the dosage of rinse aid
According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1= minimum dosage, position 6= maximum dosage).
The dose is factory set in position 4.
Increase the dose if there are drops of water or lime spots on the dishes after washing.
Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades.
Daily use
•Check if it's necessary to refill with dishwasher salt or rinse aid.
•Load cutlery and dishes into the dishwasher.
•Fill with dishwasher detergent.
•Select a wash programme suitable for the cutlery and dishes.
•Start the wash programme.
Loading cutlery and dishes
Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher.
•Before loading the dishes, you should:
–Remove all left over food and debris.
–Soften remnants of burnt food in pans
Loading...