AEG-Electrolux F35010ILB, F35010ILW, F35010ILM User Manual

0 (0)

FAVORIT 35010 IL

User manual

Dishwasher

Istruzioni per l’uso

Lavastoviglie

2 Contents

Thank you for choosing one of our high-quality products.

To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

Contents

Operating instructions

3

 

Safety information

3

 

Correct use

3

 

General safety

3

 

Child safety

3

 

Installation

4

 

Product description

4

 

Control panel

5

 

Programme knob and On/Off indicator light

 

 

6

 

First use

6

 

Set the water softener

6

 

Setting manually

7

 

Setting electronically

7

 

Use of dishwasher salt

8

 

Use of rinse aid

8

 

Adjusting the dosage of rinse aid

9

 

Daily use

10

 

Load cutlery and dishes

10

 

The lower basket

11

 

The cutlery basket

11

 

The upper basket

12

Adjusting the height of the upper basket

13

 

 

 

Use of detergent

13

 

Fill with detergent

14

 

Use of combi detergent tablets

15

 

Washing programmes

15

Select and start a washing programme

16

Setting and starting the programme with

"delay start"

16

Unloading the dishwasher

17

Care and cleaning

18

Cleaning the filters

18

Cleaning the spray arms

19

External cleaning

19

Internal cleaning

19

Prolonged periods of non-operation

19

Frost precautions

19

Moving the machine

20

What to do if…

20

Technical data

21

Installation instructions

22

Installation

22

Fixing to the adjacent units

22

Levelling

22

Water connection

22

Water supply connections

22

Water inlet hose with safety valve

23

Water outlet hose connection

23

Electrical connection

24

Environment concerns

25

Packaging material

25

Subject to change without notice

Safety information

3

 

 

Operating instructions

Safety information

In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety.

Correct use

This dishwasher is only intended for washing household utensils suitable for machine washing.

Do not put any solvents in the dishwasher. This could cause an explosion.

Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket.

Only use products (detergent, salt and rinse aid) suitable for dishwashers.

Avoid opening the door whilst the appliance is in operation, hot steam may escape.

Do not take any dishes out of the dishwasher before the end of the dishwashing cycle.

After use, isolate the appliance from the power supply and turn off the water supply.

This product should be serviced only by an authorised service engineer, and only genuine spare parts should be used.

Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons will cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.

General safety

Persons (including children) with reduced physical sensory, mental capabilities or lack of experience and knowledge must not use the appliance. They must have supervision or instruction for the operation of the appliance by a person responsible for their safety.

Dishwasher detergents can cause chemical burns to eyes, mouth and throat. Could endanger life! Comply with the safety instructions of the dishwasher detergent manufacturer.

Water in the dishwasher is not for drinking purposes. Detergent residue may still be present in your machine.

Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themselves.

Do not sit or stand on the open door.

Child safety

This appliance is designed to be operated by adults. Don’t allow children to use the dishwasher unsupervised.

Keep all packaging well away from children. There is risk of suffocation.

Keep all detergents in a safe place out of children’s reach.

4 Product description

• Keep children well away from the dishwasher when the door is open.

Installation

Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged contact your supplier.

All packaging must be removed before use.

Any electrical and plumbing work required to install this appliance must be carried out by a qualified and competent person.

For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way.

Never use the dishwasher if the electrical supply cable and water hoses are damaged; or if the control panel, work top or plinth area are damaged such that the inside of the appliance is freely accessible. Contact your local Service Force centre, in order to avoid hazard.

All sides of the dishwasher must never be drilled to prevent damage to hydraulic and electric components.

WARNING!

For electrical and water connection carefully follow the instructions given in specific paragraphs.

Product description

1Upper basket

2Water hardness dial

3Salt container

4Detergent dispenser

Control panel

5

 

 

5Rinse aid dispenser

6Rating plate

7Filters

8Lower spray arm

9Upper spray arm

Control panel

1Programme knob

2START/RESET button

3Delay start button

4Indicator lights

5On/Off indicator light

6Programme marker

 

Indicator lights

Wash

 

Illuminates when the washing and rinsing pha-

 

 

ses are running.

 

 

 

Dry

Illuminates when the drying phase is running.

End of programme

Illuminates when the washing programme has

 

ended. It also has added functions of visual sig-

 

nalling as:

 

the setting of the water softener,

 

intervention of an alarm due to the malfunc-

 

 

tion of the machine.

Salt refilling

Illuminates when special salt needs to be filled.

1)

6 First use

 

Indicator lights

Rinse aid

Illuminates when rinse aid needs to be filled.

1)

1)The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and rinse aid is necessary.

Programme knob and On/Off indicator light

The selection of a washing programme occurs by turning the programme knob clockwise or anticlockwise, until the programme marker , placed on the knob, corresponds with the desired washing programme indicated on the control panel.

The On/Off indicator light illuminates (position ON )

To switch off the appliance turn the programme knob until the programme marker corresponds with the On/Off indicator light . The On/Off indicator light turns off (position OFF ).

With the programme knob it is also possible to set the level of the water softener.

First use

Before using your dishwasher for the first time:

Ensure that the electrical and water connections comply with the installation instructions

Remove all packaging from inside the appliance

Set the water softener

Pour 1 litre of water inside the salt container and then fill with dishwasher salt

Fill the rinse aid dispenser

If you want to use combi detergent tablets ("3 in 1", "4 in 1", "5 in 1" etc... ) follow the instructions given in "Use of detergent".

Set the water softener

The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.

The higher the content of these minerals and salts, the harder your water is. Water hardness is measured in equivalent scales, German degrees (°dH), French degrees (°TH) and mmol/l (millimol per litre - international unit for the hardness of water).

The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

The water softener must be set in both ways: manually, using the water hardness dial and electronically.

 

 

 

 

 

Set the water softener

 

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Water hardness

 

Adjusting the water hardness

Use of salt

 

 

 

 

 

setting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

°dH

°TH

mmol/l

manually

 

electronically

 

 

 

 

51 - 70

91 - 125

9,1 - 12,5

2

 

level 10

yes

 

 

43 - 50

76 - 90

7,6 - 8,9

2

 

level 9

yes

 

 

37 - 42

65 - 75

6,5 - 7,5

2

 

level 8

yes

 

 

29 - 36

51 - 64

5,1 - 6,4

2

 

level 7

yes

 

 

23 - 28

40 - 50

4,0 - 5,0

2

 

level 6

yes

 

 

 

 

 

 

 

 

 

 

 

 

19 - 22

33 - 39

3,3 - 3,9

2

 

level 5

yes

 

 

 

 

 

 

 

 

 

 

 

 

15 - 18

26 - 32

2,6 - 3,2

1

 

level 4

yes

 

 

11 - 14

19 - 25

1,9 - 2,5

1

 

level 3

yes

 

 

4 - 10

7 - 18

0,7 - 1,8

1

 

level 2

yes

 

 

< 4

< 7

< 0,7

1

 

level 1

no

 

 

 

 

 

 

 

 

 

 

 

Setting manually

The dishwasher is factory set at position 2.

1. Open the dishwasher door.

2. Remove the lower basket from the dishwasher.

3. Turn the water hardness dial to position 1 or 2 (see table).

4. Replace the lower basket.

Setting electronically

The dishwasher is factory set at level 5.

1.The dishwasher must be switched off.

Keep the START/RESET button pressed and turn the programme knob clockwise until the programme marker corresponds with the first washing programme.

2.Release the START/RESET button , the On/Off and START/RESET indicator lights start to flash indicating that you have activated the water softener setting function.

3.At the same time, the end of programme indicator light starts to flash.

The current level is indicated by the number of flashes of end of programme indicator light and a pause of about 3 seconds.

Examples:

5 flashes, pause, 5 flashes, pause, etc... = level 5 6 flashes, pause, 6 flashes, pause, etc... = level 6

4.To change the level, press the START/RESET button . Each time the button is pressed the level changes.

8 Use of dishwasher salt

Examples:

if the current level is 5, by pressing START/RESET button if the current level is 10, by pressing START/RESET button

once, level 6 is selected. once, level 1 is selected.

5.To memorize the operation, switch off the dishwasher by returning the programme knob to the Off position.

Use of dishwasher salt

WARNING!

Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion.

To fill:

1.Open the door, remove the lower basket and unscrew the cap of the salt container by turning it anticlockwise.

2.Pour 1 litre of water inside the container (this is necessary only before filling with

salt for the first time) .

3. Using the funnel provided, pour in the salt until the container is full.

4. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.

5. Replace the cap tightly turning it clockwise until it stops with a click.

Do not worry if water overflows from the unit when filling with salt, this is quite normal.

The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.

Use of rinse aid

WARNING!

Only use branded rinse aid for dishwashers.

Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.

Rinse aid ensures thorough rinsing, and spot and streak free drying.

Rinse aid is automatically added during the last rinse.

Use of rinse aid

9

 

 

1. Open the container by pressing the release button (A).

2.Add the rinse aid in the container. The maximum level for filling is indicated by "max".

The dispenser holds about 110 ml of rinse aid, which is sufficient for between 16 and 40 dishwashing cycles, depending upon the dosage setting.

3. Ensure that the lid is closed after every refill.

Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.

Adjusting the dosage of rinse aid

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1= minimum dosage, position 6= maximum dosage). The dose is factory set in position 4.

Increase the dose if there are drops of water or lime spots on the dishes after washing.

Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades.

10 Daily use

Daily use

Check if it's necessary to refill with dishwasher salt or rinse aid.

Load cutlery and dishes into the dishwasher.

Fill with dishwasher detergent.

Select a wash programme suitable for the cutlery and dishes.

Start the wash programme.

Load cutlery and dishes

Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher.

Before loading the dishes, you should:

Remove all left over food and debris.

Soften remnants of burnt food in pans

When loading the dishes and cutlery, please note:

Dishes and cutlery must not impede the rotation of the spray arms.

Load hollow items such as cups, glasses, pans, etc. with the opening downwards so that water cannot collect in the container or a deep base.

Dishes and items of cutlery must not lie inside one another, or cover each other.

To avoid damage to glasses, they must not touch.

Lay small objects in the cutlery basket.

Plastic items and pans with non stick coatings have a tendency to retain water drops; these items will not dry as well as porcelain and steel items.

Light items (plastic bowls etc.) must be loaded in the upper basket and arranged so they do not move.

For washing in the dishwasher the following cutlery and dishes

 

are not suitable:

 

are of limited suitability:

• Cutlery with wooden, horn, china or mother-

Only wash stoneware in the dishwasher if it

 

of-pearls handles.

 

is specially marked as being dishwasher-safe

Plastic items that are not heat resistant.

 

by the manufacturer.

Older cutlery with glued parts that are not

• Glazed patterns may fade if machine washed

 

temperature resistant.

 

frequently.

Bonded cutlery items or dishes.

Silver and aluminium parts have a tendency

Pewter or copper items.

 

to discolour during washing: Residues, e.g.

Lead crystal glass.

 

egg white, egg yolk and mustard often cause

• Steel items prone to rusting.

 

discolouring and staining on silver. Therefore

Wooden platters.

 

always clean left-overs from silver immedi-

Items made from synthetics fibres.

 

ately, if it is not to be washed straight after

 

 

 

use.

 

 

 

 

Open the door and slide out the baskets to load the dishes.

Load cutlery and dishes

11

 

 

The lower basket

Load larger and heavily soiled dishes and pans in the lower basket.

To make it easier to load larger dishes, the 2 plate racks on the right in the lower basket can be folded down.

The cutlery basket

WARNING!

Long bladed knives stored in an upright position are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives.

To ensure that all items of cutlery in the cutlery basket can be reached by the water, you should:

AEG-Electrolux F35010ILB, F35010ILW, F35010ILM User Manual

12Load cutlery and dishes

1.Place the grid insert on the cutlery basket.

2.Place forks and spoon in the cutlery basket with their handles pointing downwards.

For larger utensils, such as whisks, leave off one half of the cutlery grid.

The upper basket

Load smaller, fragile crockery and long, sharp cutlery in the upper basket.

Arrange items of crockery on and under the folding cup racks so that they are offset from each other and water can reach all items.

Use of detergent 13

• The cup racks can be folded up out of the way for tall crockery items.

• Lay or hang wine and brandy glasses in the slots in the cup racks.

Adjusting the height of the upper basket

Maximum height of the dishes in:

 

the upper basket

the lower basket

 

 

 

With upper basket raised

23 cm

34 cm

 

 

 

With upper basket lowered

25 cm

32 cm

 

 

 

The height of the upper basket can also be adjusted when it is loaded.

Raising / lowering the upper basket:

1.Pull out the upper basket completely.

2.Holding the upper basket by the handle,

raise it as far as it will go and then lower it vertically.

The upper basket will latch into the lower or the upper position.

WARNING!

After loading your machine always close the door, as an open door can be a hazard.

Before closing the door, ensure that the spray arms can rotate freely.

Use of detergent

Only use detergents specifically designed for use in dishwashers.

Please observe the manufacturer's dosing and storage recommendations as stated on the detergent packaging.

Using no more than the correct amount of detergent contributes to reducing pollution.

14 Use of detergent

Fill with detergent

1. Open the lid.

2.Fill the detergent dispenser (1) with detergent. The marking indicates the dosing levels:

20 = approximately 20 g of detergent

30 = approximately 30 g of detergent.

3.All programmes with prewash need an additional detergent dose (5/10 g) that must be placed in the prewash detergent chamber (2).

This detergent will take effect during the prewash phase.

4.When using detergent tablets, place the tablet in compartment (1)

5.Close the lid and press until it locks in place.

Detergent tablets

Detergent tablets from different manufactures dissolve at different rates. For this reason, some detergent tablets do not attain their full cleaning power during short washing programmes. Therefore, please use long washing programmes when using detergent tablets, to ensure the complete removal of detergent residuals.

Washing programmes 15

Use of combi detergent tablets

These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose («3 in 1», «4 in 1», «5 in 1» etc...).

1.Check whether these detergents are suitable for your water hardness. See the manufacturers instructions.

2.Select the lowest setting for water hardness and rinse aid dosage.

3.Before the start of the washing programme put the combi detergent tablet in the detergent dispenser.

The refilling of the salt container and the rinse aid dispenser are no longer necessary. In this case the rinse aid indicator light will always remain illuminated when the machine is switched on (not all dishwasher models are foreseen with rinse aid indicator light).

If the drying results are not satisfactory we recommend that you:

1.Fill up the rinse aid dispenser with rinse aid.

2.Set the rinse aid dosage to position 2.

If you decide to turn back to the use of the standard detergent system we advise that you:

1.Fill up the dispensers for salt and rinse aid again.

2.Adjust the water hardness setting to the highest setting and perform washing programme without loading any dishes.

3.Adjust the water hardness setting according to the hardness of the water in your area.

4.Adjust the rinse aid dosage.

Washing programmes

Programme

Degree of

Type of load

 

soil

 

 

 

 

INTENSIV

Heavy soil

Crockery,

CARE 70°

 

cutlery, pots

 

 

and pans

 

 

 

30 MIN 2)

Light soil

Crockery and

 

 

cutlery

 

 

 

NORMAL 65°

Normal soil

Crockery and

 

 

cutlery

 

 

 

 

Programme description

Consumption val-

 

 

 

 

 

 

 

 

ues1)

 

 

 

 

 

 

 

 

 

 

 

 

Prewash

 

Main wash

 

Intermediate rinse

Final rinse

Drying

Duration (minutes)

 

Energy (kWh)

Water (litres)

 

 

 

 

2 x

 

 

130

 

-2,0

- 24

 

 

 

 

 

 

 

120 -

 

1,8

22

 

 

 

 

 

 

 

30

 

0,9

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 x

 

 

105 - 115

 

1,5 - 1,7

23 - 25

 

 

 

 

 

 

 

 

 

 

 

16

Select and start a washing programme

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Programme

Degree of

Type of load

 

Programme description

Consumption val-

 

 

soil

 

 

 

 

 

 

 

 

 

ues1)

 

 

 

 

 

Prewash

 

Main wash

 

Intermediate rinse

Final rinse

Drying

Duration (minutes)

 

Energy (kWh)

Water (litres)

 

ECO 50° 3)

Normal soil

Crockery and

 

 

 

 

 

 

 

-130140

 

-1,01,2

1416

 

 

 

cutlery

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PREWASH

Any

Partial load

 

 

 

 

 

 

 

12

 

0,1

5

 

 

 

(to be com-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

pleted later in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the day)4)

 

 

 

 

 

 

 

 

 

 

 

1)The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes.

2)Ideal for washing a partially loaded dishwasher. This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery.

3)Test programme for test institutes.

4)This programme does not require the use of detergent

Select and start a washing programme

1.Check that the baskets have been loaded correctly and that the spray arms are free to rotate

2.Check that the water tap is opened

3.Close the dishwasher’s door.

4.Turn the programme knob until the programme marker corresponds with the desired programme (see "Washing programmes" chart).

The On/Off indicator light illuminates.

The indicator lights of the phases foreseen for the programme start flashing.

5.Press the START/RESET button , the programme starts automatically and the START/ RESET indicator light illuminates.

As soon as the programme starts, the phase indicator lights turn off except for the indicator light for the phase in progress which will remain lit.

During the running of the programme, it is not possible to change the selection made by turning the programme knob in correspondence of another programme or the Off position. If you want to change the running programme you must cancel the selection made (see "Cancel a washing programme in progress").

Setting and starting the programme with "delay start"

• Allows the start of the programme to be delayed by 3 hours.

1.After having selected the washing programme, press the delay start button .

– The corresponding indicator light illuminates.

Loading...
+ 36 hidden pages