WATER SYSTEMS
Features
•Inner frame, made of galvanized steel and lined with selfextinguishing thermal insulation material.
•Coil for 2 pipe systems, independent of the inner frame and provided with antitorsion structure. Standard water connections are on the right side of the unit, facing the air outlet; however they can be supplied left hand side on request; all water connections are 1/2” G female.
•Centrifugal fan deck independent of the inner frame with two aluminium impellers and galvanized steel scrolls, dynamically balanced; it includes the insulated condensate tray.
•3 speed single phase motor, with permanently connected capacitor and thermal protection for the windings.
•Terminal board for the electric connections, fitted into a plastic box (ABS), mounted on the left side of the inner structure and easily removable.
•Outer casing, made of white (RAL 9001) ABS plastic (YSF and YSW models).
•Panel frontage made of sheet steel and painted with epoxy powders, of the same colour of the casing (YSF and YSW models).
•Air intake group (YSF and YSW models) and air delivery grilles (model YSW), both made of heat-resistant ABS plastic.
•Protection grill on the air delivery, made of heat-resistant ABS plastic (YSF and YSW models).
•Feet set (only YSF model), made of the same material and colour of the casing.
•Foldaway filter, easily removable, consisting of either an ABS plastic structure (YSW model) or a metallic
structure (all other models), with a filter element made of polypropylene.
FanCoilUnit
SAPHIR(2&4pipesystem)
A complete range from 0.8 kW up to 3.5 kW
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CSL00 (Built in) |
|
CML00 (Built in) |
|
CEL00 (Built in) |
CEL20 (Built in) |
CEL30 (Built in) |
||||
|
CSR00 (Wall mounted) |
|
CMR00 (Wall mounted) |
|
CER00 (Wall mounted) |
CER20 (Wall mounted) |
CER30 (Wall mounted) |
||||
|
Fan speed selector |
|
Thermostat with |
|
Thermostat with |
Thermostat with |
Thermostat with |
||||
|
|
|
manual fan speed and |
|
manual fan speed and |
auto. fan speed and |
auto. fan speed and |
||||
|
|
|
S/W change over |
|
automatic change over |
automatic change over |
automatic change over |
||||
|
|
|
|
|
|
|
|
|
|
for modulating valve |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fan Coil Unit SAPHIR
0.8 to 3.5 kW
Technical features
Model |
|
|
130 |
140 |
|
230 |
240 |
|
|
|
|
|
|
|
|
|
|
max |
1.50 |
2.00 |
|
2.87 |
3.52 |
Total cooling capacity [kW] |
(1) |
med |
1.14 |
1.54 |
|
2.39 |
3.00 |
|
|
|
|
|
|
|
|
|
|
min |
0.83 |
1.13 |
|
1.86 |
2.29 |
|
|
|
|
|
|
|
|
|
|
max |
1.16 |
1.58 |
|
2.16 |
2.70 |
Sensible cooling capacity [kW] |
(1) |
|
|
|
|
|
|
med |
0.86 |
1.19 |
|
1.78 |
2.27 |
||
|
|
|
|
|
|
|
|
|
|
min |
0.62 |
0.85 |
|
1.37 |
1.70 |
|
|
|
|
|
|
|
|
|
|
max |
282 |
342 |
|
493 |
605 |
Water flow in cooling [l/h] |
|
|
|
|
|
|
|
(1) |
med |
197 |
264 |
|
410 |
515 |
|
|
|
min |
143 |
197 |
|
319 |
394 |
|
|
|
|
|
|
|
|
|
|
max |
1.9 |
2.9 |
|
7.0 |
10.1 |
Pressure drop in cooling [kPa] |
|
|
|
|
|
|
|
(1) |
med |
0.9 |
1.7 |
|
5.1 |
7.6 |
|
|
|
|
|
|
|
|
|
|
|
min |
0.5 |
0.9 |
|
3.2 |
4.7 |
|
|
|
|
|
|
|
|
|
|
max |
1.98 |
2.79 |
|
3.83 |
4.82 |
Heating capacity 2 pipes [kW] |
|
|
|
|
|
|
|
(2) |
med |
1.49 |
2.07 |
|
3.21 |
4.05 |
|
|
|
|
|
|
|
|
|
|
|
min |
1.09 |
1.48 |
|
2.50 |
3.07 |
|
|
max |
282 |
342 |
|
493 |
605 |
Water flow in heating 2 pipes [l/h] * |
|
|
|
|
|
|
|
(2) |
med |
197 |
264 |
|
410 |
515 |
|
|
|
|
|
|
|
|
|
|
|
min |
143 |
197 |
|
319 |
394 |
|
|
|
|
|
|
|
|
|
|
max |
1.6 |
2.4 |
|
5.8 |
8.4 |
Pressure drop in heating 2 pipes [kPa] |
|
|
|
|
|
|
|
(2) |
med |
0.7 |
1.4 |
|
4.2 |
6.3 |
|
|
|
|
|
|
|
|
|
|
|
min |
0.4 |
0.7 |
|
2.7 |
3.9 |
|
|
|
|
|
|
|
|
|
|
max |
3.81 |
5.10 |
|
6.56 |
8.21 |
Heating capacity 2 pipes [kW] |
(3) |
med |
2.84 |
3.91 |
|
5.44 |
6.89 |
|
|
|
|
|
|
|
|
|
|
min |
2.09 |
2.83 |
|
4.23 |
5.20 |
|
|
|
|
|
|
|
|
|
|
max |
333 |
450 |
|
574 |
718 |
Water flow in heating 2 pipes [l/h] |
(3) |
|
|
|
|
|
|
med |
248 |
342 |
|
476 |
602 |
||
|
|
|
|
|
|
|
|
|
|
min |
183 |
247 |
|
370 |
455 |
|
|
|
|
|
|
|
|
|
|
max |
2.1 |
4.1 |
|
7.2 |
10.7 |
Pressure drop in heating 2 pipes [kPa] |
|
|
|
|
|
|
|
(3) |
med |
1.1 |
2.3 |
|
5.1 |
7.8 |
|
|
|
min |
0.6 |
1.1 |
|
3.3 |
4.7 |
|
|
|
|
|
|
|
|
|
|
max |
1.94 |
2.36 |
|
3.28 |
3.73 |
Heating capacity 4 pipes [kW] |
|
|
|
|
|
|
|
(3) |
med |
1.59 |
1.97 |
|
2.92 |
3.38 |
|
|
|
min |
1.25 |
1.59 |
|
2.48 |
2.84 |
|
|
|
|
|
|
|
|
|
|
max |
170 |
206 |
|
287 |
326 |
Water flow in heating 4 pipes [l/h] |
|
|
|
|
|
|
|
(3) |
med |
139 |
172 |
|
256 |
296 |
|
|
|
|
|
|
|
|
|
|
|
min |
109 |
139 |
|
217 |
248 |
|
|
max |
2.2 |
3.3 |
|
10.4 |
13.2 |
Pressure drop in heating 4 pipes [kPa] |
|
|
|
|
|
|
|
(3) |
med |
1.5 |
2.3 |
|
8.5 |
11.0 |
|
|
|
|
|
|
|
|
|
|
|
min |
0.9 |
1.5 |
|
6.3 |
8.0 |
|
|
|
|
|
|
|
|
|
|
max |
275 |
390 |
|
425 |
550 |
Air flow [m3/h] |
|
|
|
|
|
|
|
|
med |
201 |
288 |
|
330 |
460 |
|
|
|
|
|
|
|
|
|
|
|
min |
125 |
190 |
|
246 |
325 |
|
|
|
|
|
|
|
|
|
|
max |
44 |
53 |
|
48 |
55 |
Sound power level [dB(A)] |
|
|
|
|
|
|
|
|
med |
36 |
45 |
|
43 |
50 |
|
|
|
|
|
|
|
|
|
|
|
min |
28 |
35 |
|
35 |
41 |
|
|
|
|
|
|
|
|
|
|
max |
35 |
44 |
|
39 |
46 |
Sound pressure level [dB(A)] |
|
|
|
|
|
|
|
(4) |
med |
27 |
36 |
|
34 |
41 |
|
|
|
|
|
|
|
|
|
|
|
min |
19 |
26 |
|
26 |
32 |
|
|
|
|
|
|
|
|
Power supply [V-ph-Hz] |
|
|
|
|
230 - 1- 50 |
|
|
|
|
|
|
|
|
|
|
Power input [W] |
|
max |
31 |
42 |
|
61 |
63 |
|
|
|
|
|
|
|
|
Absorbed current [W] |
|
max |
0.14 |
0.20 |
|
0.29 |
0.28 |
|
|
|
|
|
|
|
|
Water content (2 pipes) [l] |
|
|
0.96 |
0.96 |
|
1.40 |
1.40 |
(1)Room temperature 27°C d.b., 19ºC w.b. - Water temperature 7/12 °C
(2)Room temperature 20°C - Water inlet temperature: 50°C
(3)Room temperature 20°C - Water inlet temperature: 70/60°C
(4)Sound pressure level in a 100 m2 room, at 1,5 m distance and riverberating time of 0,3 s. * Water flow values as Cooling, accordingly to the EUROVENT standards and UNI ENV 1397
E-COM-H0703