ZETTLER AZ936-1A-6D, AZ936-1A-5DE, AZ936-1A-5D, AZ936-1A-48DE, AZ936-1A-48D Datasheet
...
ZETTLERelectronics
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com
2000-04-21
AZ936
GENERAL DATA
Life Expectancy Minimum operations
Mechanical 1 x 10
7
Electrical 1 x 105at rated load
Operate Time (typical) 10 ms at nominal coil voltage
Release Time (typical) 2 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 1500 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms contact to contact
Insulation 1000 megohms min. at 20°C, 500 VDC,
Resistance 50% RH
Dropout Greater than 5% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating -40°C (-40°F) to 70°C (158°F)
Storage -40°C (-42°F) to 115°C (239°F)
Vibration 0.062" DA at 10–55 Hz
Shock 10 g
Enclosure P.B.T. polyester
Terminals Tinned copper alloy, P.C.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 5 grams
10 AMP LOW PROFILE
POWER RELAY
FEATURES
• High power switching (2000 VA)
• High sensitivity, 190 mW pickup
• Low profile (less than .25" height)
• SPST (1 Form A)
• DC coils up to 100 VDC
• UL file E44211, CSA file 720514
• TÜV file BL991234205002
CONTACTS
Arrangement SPST (1 Form A)
Ratings Resistive load:
Max. switched power: 240 W, 2000 VA
Max. switched current: 10 A
Max. switched voltage: 250 VAC/110 VDC
Rated Load
UL, CSA 10 A at 125 VAC, resistive
8 A at 250/30 VDC, resistive
1
/10HP 125 VAC
1
/10HP 250 VAC
TÜV 10 A at 125 VAC, resistive
8 A at 250 VAC, 30 VDC, resistive
Min. Load 5 VDC, 0.1 A
Material Silver tin oxide
Resistance < 100 milliohms initially
(6 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical) 190 mW
Max. Continuous
Dissipation 1.2 W at 20°C (68°F)
Temperature Rise 20°C (36°F) at nominal coil voltage
Temperature Max. 115°C (239°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
2000-04-21
ZETTLERelectronics
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com
AZ936
RELAY ORDERING DATA
COIL SPECIFICATIONS SPST-NO (1 Form A) ORDER NUMBER
Nominal Coil Must Operate Max. Continuous Coil Resistance
Unsealed Sealed
VDC VDC VDC ±10%
3 2.4 3.9 30 AZ936–1A–3D AZ936–1A–3DE
5 4.0 6.5 83 AZ936–1A–5D AZ936–1A–5DE
6 4.8 7.8 120 AZ936–1A–6D AZ936–1A–6DE
9 7.2 11.7 270 AZ936–1A–9D AZ936–1A–9DE
12 9.6 15.6 480 AZ936–1A–12D AZ936–1A–12DE
24 19.2 31.2 1920 AZ936–1A–24D AZ936–1A–24DE
48 33.6 52.8 4608 AZ936–1A–48D AZ936–1A–48DE
100 70.0 110.0 20,000 AZ936–1A–100D AZ936–1A–100DE
MECHANICAL DATA
Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010"
1
4
2
3
4
3
12
PC BOARD LAYOUT
WIRING DIAGRAM
VIEWED TOWARD TERMINALS
VIEWED TOWARD TERMINALS
12
4
3
[10.2]
.400
[ø0.9]
2xø.035
[2.1]
.083
[12.7]
.500
[ø1.3]
2xø.051
[1.6]
.065
[17.8]
.700
[0.4]
.016
[6.4]
.252
[0.3]
2x.012
[3.6]
.142
[0.8]
2x.020 SQ.
[22.0]
.866
[1.0]
2x.040
[12.7]
.500
[16.0]
.630
Loading...