ZETTLER AZ850P2-12, AZ850P1-9, AZ850P1-6, AZ850P1-5, AZ850P2-9 Datasheet
...
ZETTLERelectronics
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com
1999-10-27
AZ850
MICROMINIATURE
POLARIZED RELAY
FEATURES
• Microminiature size: Height:.197 inches (5 mm);
Length:.551 inches (14 mm); Width:.354 inches (9 mm)
• High sensitivity, 79 mW pickup
• Monostable and bistable (latching) single coil and two
coil versions available
• Meets FCC Part 68.302 1500 V lightning surge
• DIP terminal layout, fits 10 pin IC socket
• Epoxy sealed for automatic wave soldering and cleaning
• UL file E43203, CSA file 73363
CONTACTS
Arrangement DPDT (2 Form C)
Bifurcated crossbar contacts
Ratings Resistive load:
Max. switched power: 30 W or 62.5 VA
Max. switched current: 1 A
Max. switched voltage:220 VDC or 250 VAC
Max. carry current: 2 A
Rated Load
UL/CSA 1 A at 30 VDC
0.5 A at 125 VAC
Material Silver palladium; gold clad
Resistance < 50 milliohms initially
GENERAL DATA
Life Expectancy Minimum operations
Mechanical 1 x 10
8
Electrical 2 x 105at 1 A, 30 VDC
1 x 105at 0.5 A, 125VAC
Operate Time (typical) 2 ms at nominal coil voltage
Release Time (typical) 1 ms at nominal coil voltage
(with no coil suppression)
Set Time 2 ms at nominal coil voltage (typical)
(bistable versions)
Reset Time 2 ms at nominal coil voltage (typical)
(bistable versions)
Dropout Greater than 10% of nominal coil voltage
Capacitance Contact to contact: 0.4 pF
Contact set to contact set: 0.2 pF
Contact to coil: 0.9 pF
Dielectric Strength 1000 Vrms between contact sets
(at sea level) 1000 Vrms across contacts
1250 Vrms contact to coil
Meets FCC part 68.302 1500 V lightning
surge
Insulation Resistance 1000 megohms min. at 25°C, 500 VDC,
50% RH
Ambient Temperature At nominal coil voltage
Operating -40°C (-40°F) to 70°C (158°F)
Storage -40°C (-40°F) to 105°C (221°F)
Vibration .130" DA at 10–55 Hz
Shock 50 g
Enclosure LCP
Terminals Tinned copper alloy, P.C.
Max. Solder Temp. 250°C (482°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 1.5 grams
COIL (Polarized)
Power
At Pickup Voltage Single side stable: 79–142 mW
(typical) Bistable (latching) single coil: 56–84 mW
Bistable (latching) two coil: 113–169 mW
Max. Continuous 875 mW at 20°C (68°F) ambient
Dissipation
Temperature Rise 18°C (32°F) at nominal coil voltage
Temperature Max. 105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay has fixed coil polarity.
3. Relay may pull in with less than “Must Operate” value.
4. Relay adjustment may be affected if undue pressure is exerted
on relay case.
5. For complete isolation between the relay’s magnetic fields, it is
recommended that a .197" (5.0 mm) space be provided between
adjacent relays.
6. Specifications subject to change without notice.
1999-10-27
ZETTLERelectronics
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com
AZ850
MECHANICAL DATA
Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010"
RELAY ORDERING DATA
SINGLE SIDE STABLE
COIL SPECIFICATIONS
Nominal Coil Max. Continuous Coil Resistance Must Operate
ORDER NUMBER
VDC VDC ± 10% VDC
3 7.5 64.3 2.1 AZ850–3
4.5 11.25 145.2 3.15 AZ850-4.5
5 12.5 178 3.5 AZ850–5
6 15.0 257 4.2 AZ850–6
9 22.5 579 6.3 AZ850–9
12 30.0 1,028 8.4 AZ850–12
24 48.0 2,880 16.8 AZ850–24
BISTABLE (LATCHING) SINGLE COIL
COIL SPECIFICATIONS
Nominal Coil Max. Continuous Coil Resistance Must Operate ORDER NUMBER
VDC VDC ± 10% VDC
3 8.7 90 2.1 AZ850P1–3
4.5 13.0 203 3.2 AZ850P1–4.5
5 14.5 250 3.5 AZ850P1–5
6 17.4 360 4.2 AZ850P1–6
9 26.1 810 6.3 AZ850P1–9
12 34.8 1440 8.4 AZ850P1–12
24 57.6 3840 16.8 AZ850P1–24
BISTABLE (LATCHING) TWO COIL
COIL SPECIFICATIONS
Nominal Coil Max. Continuous Coil Resistance ± 10% Must Operate
ORDER NUMBER
VDC VDC Coil I Coil II VDC
3 6.0 45 45 2.1 AZ850P2–3
4.5 13.0 102 102 3.2 AZ850P2–4.5
5 10.0 125 125 3.5 AZ850P2–5
6 12.0 180 180 4.2 AZ850P2–6
9 18.0 405 405 6.3 AZ850P2–9
12 24 720 720 8.4 AZ850P2–12
24 40 1,920 1,920 16.8 AZ850P2–24
.551
[14.0]
.010
[0.25]
4x.100
[2.54]
10x.020
[0.51]
.197
[5.0]
10x.138
[3.5]
WIRING DIAGRAMS
Stripe on top of relay
indicates the position
of pins 1 & 10
SINGLE SIDE STABLE
(+)
(-)
DEENERGIZED OR RESET CONDITION
45123
6710 9 8
Watch for polarity
VIEWED TOWARDS TERMINALS
BISTABLE (LATCHING) TWO COIL
(+)
(+)
354
21
867910
RESET CONDITION
Watch for polarity
.354
[9.00]
10x.010
.300
[7.63]
Set Coil
(-)
(-)
Reset Coil
[0.25]
Diagrams show the "reset"
position before energized
with polarity as shown.
PC BOARD LAYOUT
.027
[0.69]
.300
[7.62]
.075
[1.90]
VIEWED TOWARDS TERMINALS
4 x .100
[2.54]
10xø.032
[ø0.81]
Loading...