ZETTLER AZ2280-1A-9D, AZ2280-1A-6D, AZ2280-1A-5D, AZ2280-1A-18D, AZ2280-1A-15D Datasheet

ZETTLERelectronics

Telephone [phone] Fax [phone]

Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [e-mail]

1999-03-11

AZ2280

CONTACTS

Arrangement SPST (1 Form A, or B)

SPDT (1 Form C)

Ratings Resistive load:

Max. switched power: 900 W or 7200 VA
Max. switched current:30 A (Form A N.O.)

15 A (Form B N.O.)
20 A (Form C N.O.)
15 A (Form C N.O.

Max. switched voltage: 277 VAC, 30 VDC

UL, CUR 30/15 A @ 240 VAC, gen use (NO/NC, Form A or B)

20/10 A @ 240 VAC, gen use (NO/NC, Form C)
20/10 A @ 28 VDC, res (NO/NC, Form A or B)

1.0/.25 Hp @ 120 VAC, (NO/NC, Form A or B)

2.0/.50 Hp @ 240 VAC, (NO/NC, Form A, B or C)
5/3 A @ 240 VAC, tungsten (NO/NC, Form A, B or C)
6/3 A @ 277 VAC, gen use (NO/NC, Form A, B or C)
6/3 A @ 277 VAC, ballast (NO/NC, Form A, B or C)

Minimum

Load 5 VDC, 0.1 A

Material Silver alloy

Resistance < 50 milliohms initially

(24 V, 1 A voltage drop method)

GENERAL DATA

Life Expectancy Minimum operations

Mechanical 1 x 10

7

Electrical 1 x 105at rated load
Operate Time 15 ms at nominal coil voltage
Release Time 10 ms at nominal coil voltage

(with no coil suppression)

Dielectric Strength 1500 Vrms contact to contact
(at sea level for 1 min.) 2500 Vrms contact to coil

Insulation Resistance 1000 megohms min. at 500 VDC, 20°C

50% RH

Dropout DC:Greater than10%of nominal coilvoltage

AC: Greater than 20%of nominal coilvoltage

Ambient Temperature At nominal coil voltage

Operating -55°C (-67°F) to 85°C (185°F)

Storage -55°C (-67°F) to 105°C (221°F)
Vibration 0.062" DA at 10–55 Hz
Shock 10 g
Enclosure P.B.T. polyester
Terminals Tinned copper alloy, Quick Connects
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 36 grams

30 AMP MINIATURE
POWER RELAY

FEATURES

• Quick-connect leads for contacts and coil

• 1 Form A, B and C contacts available

• AC and DC coils available

• Available with epoxy seal

• UL and Canadian file E44211

COIL

Power

At Pickup Voltage DC: 500 mW
(typical) AC: 1.4 VA

Max. Continuous DC: 1.7 W at 20°C (68°F)
Dissipation AC: 2.7 VA at 20°C (68°F)

Temperature Rise 38°C (68°F)

Temperature Max. 105°C (221°F)

NOTES

1. All values at 20°C (68°F).

2. Relay may pull in with less than “Must Operate” value.

3. Specifications subject to change without notice.

1999-03-11

ZETTLERelectronics

Telephone [phone] Fax [phone]

Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [e-mail]

AZ2280

RELAY ORDERING DATA

COIL SPECIFICATIONS – DC Coil

Nominal Coil Must Operate Max. Continuous Nominal Current Coil Resistance ORDER NUMBER*

VDC VDC VDC mA ± 10% ± 10%

5 3.75 6.4 185 27 AZ2280–1A–5D
6 4.50 7.8 150 40 AZ2280–1A–6D

9 6.75 12.2 93 97 AZ2280–1A–9D
12 9.00 15.4 77 155 AZ2280–1A–12D
15 11.25 19.8 59 256 AZ2280–1A–15D
18 13.5 24.1 47 380 AZ2280–1A–18D
24 18.00 32.0 36 660 AZ2280–1A–24D
48 36.00 62.6 19 2560 AZ2280–1A–48D

COIL SPECIFICATIONS – AC Coil

Nominal Coil Must Operate Max. Continuous Nominal Coil Coil Resistance ORDER NUMBER*

VAC VAC VAC Power VA ± 10%

12 10.2 13.8 2.0 25 AZ2280–1A–12A
24 20.4 27.6 2.0 100 AZ2280–1A–24A

120 102.0 138.0 2.0 2,500 AZ2280–1A–120A
208 176.8 276.0 1.5 11,000 AZ2280–1A–208A
240 204.0 276.0 2.0 11,000 AZ2280–1A–240A
277 235.4 318.5 2.0 14650 AZ2280-1A-277A

*Add suffix “E” for epoxy sealed version. Substitute “1B” or “1C” for 1 form B or 1 form C.

MECHANICAL DATA

Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"

1.27

1.71

(43.5)

(32.4)

1.98

(50.2)

1.08

(27.5)

0.14
(3.5)

0.25 x 0.032
±0.003

3 places

0.187 x 0.02*
±0.003

2 places

* "K" = 0.110 x .02

1.09

(27.8)

WIRING DIAGRAM (Top View)

Form AForm A Form B Form C