ZETTLER AZ683-1C-6A, AZ683-1C-50A, AZ683-1C-24A, AZ683-1C-230A, AZ683-1C-220A Datasheet

CONTACTS

Arrangement SPST (1 Form A)

SPDT (1 Form C)

Ratings Resistive load:

Max. switched power: 300 W, 2500 VA
Max. switched current: 10 A
Max. switched voltage: 150 VDC/400 VAC

Inductive load: (cos

Ø =0.4)

Max. switched power: 150W or 1875VA
Max. Switched current: 10A
Max. switched voltage: 125VDC or 400 VAC

Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.

Rated Load 10 A 250 VAC, resistive

UL, CUR

1

/2HP 277 VAC

10 A at 30 VDC

Min. Load 5 VDC, .01 A
Material Silver alloy
Resistance 30 milliohms initially (6V, 1A method)

ZETTLERelectronics

Telephone [phone] Fax [phone]

Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [e-mail]

1999-05-27

AZ683

MINIATURE
POWER RELAY

FEATURES

• AC coils

• Dielectric strength 5000 Vrms

• Low cost

• Flux tight package

• 10 Amp switching - single pole contacts

• Isolation spacing greater than 8mm

• Molded materials: all 94V-0

• UL and Canadian file E43203

GENERAL DATA

Life Expectancy Minimum operations

Mechanical 1 x 10

7

Electrical 1 x 105at rated load
Operate Time (typical) 8 ms at nominal coil voltage
Release Time (typical) 5 ms at nominal coil voltage

(with no coil suppression)

Dielectric Strength 5000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts

Insulation 1000 megohms min. at 20°C,
Resistance 500 VDC 50% RH

Dropout Greater than 30%

of nominal coil voltage

Ambient Temperature At nominal coil voltage

Operating -40°C (-40°F) to 70°C (158°F)

Storage -40°C (-40°F) to 105°C (221°F)
Vibration 0.062" DA at 10–55 Hz
Shock 10 g
Enclosure PC (94V-0)
Terminals Tinned copper alloy, P.C.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Weight 17 grams

COIL

Power

At Pickup Voltage 576 mW
(typical)

Max. Continuous 1.5 W at 20°C (68°F) ambient
Dissipation 1.2 W at 40°C (104°F) ambient

Temperature Rise 36°C (65°F) at nominal coil voltage

Temperature Max. 105°C (221°F)

NOTES

1. All values at 20°C (68°F).

2. Relay may pull in with less than “Must Operate” value.

3. Specifications subject to change without notice.

RELAY ORDERING DATA

COIL SPECIFICATIONS - AC Coil ORDER NUMBER

Nominal Coil Must Operate Max. Continuous Nominal Current Coil Resistance Form A Form C

VAC VAC VAC mA ±10% ±10% (SPST) (SPDT)

6 4.8 7.8 150.0 16 AZ683-1A-6A AZ683-1C-6A
12 9.6 15.6 75.0 65 AZ683-1A-12A AZ683-1C-12A
24 19.2 31.2 37.5 260 AZ683-1A-24A AZ683-1C-24A
50 40.0 65.0 18.0 1130 AZ683-1A-50A AZ683-1C-50A

110 88.0 143.0 10.6 4600 AZ683-1A-110A AZ683-1C-110A
220 176.0 286.0 5.3 20200 AZ683-1A-220A AZ683-1C-220A
230 184.0 299.0 3.6 24900 AZ683-1A-230A AZ683-1C-230A

1999-05-27

ZETTLERelectronics

Telephone [phone] Fax [phone]

Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [e-mail]

AZ683

MECHANICAL DATA

Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010"

035 Dia. (0.9)

2 places

(2 places Form A
(3 places Form C)

.023 (0.58) x .023 (0.58)

0.016 (0.4) x 0.040 (1.015)