ZETTLER AZ672-1A-9DE, AZ672-1A-9D, AZ672-1A-6DE, AZ672-1A-6D, AZ672-1A-5DE Datasheet
...
ZETTLERelectronics
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com
2001-01-03
AZ672
GENERAL DATA
Life Expectancy
Mechanical 2 x 10
6
Electrical 1 x 105at 10 A 120 VAC Res.
Operate Time (typical) 10 ms at nominal coil voltage
Release Time (typical) 6 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 1000 Vrms contact to contact
(at sea level for 1 min.) 4000 Vrms contact to coil
10,000 V surge contact to coil
Insulation 1000 megohms min. at 20°C,
Resistance 500 VDC, 50% RH
Dropout 5% of nominal coil voltage
Ambient Temperature
Operating -40°C (-40°F) to 70°C (158°F)
Storage -40°C (-40°F) to 105°C (221°F)
Vibration 1.5mm DA at 10–55 Hz
Shock 10 g
Enclosure Plastic
Terminals PC, tinned
Max. Solder Temp. 250°C (482°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C
Max. Immersion Time 30 seconds
Weight 12 grams (approx.)
CONTACTS
Arrangement SPST – NO
Ratings Non - inductive load:
Max. switched power: 240 W or 2000 VA
Max. switched current: 8A (DC), 10A (AC)
Max. switched voltage:100* VDC or 250 VAC
*Note: If switching voltage is greater than 30 VDC,
special precautions must be taken. Please contact
the factory.
Rated Load
UL, CUR, TÜV 10 A at 125 VAC resistive
8 A at 250 VAC resistive
8 A at 30 VDC resistive
UL, CUR TV5
1
/8HP, 125 VAC / 277 VAC
Material Silver tin indium oxide
Resistance < 100 milliohms initially
(6 V, 1A voltage drop method)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4. Specifications subject to change without notice.
MINIATURE
POWER RELAY
FEATURES
• Compact size for dense PCB layouts
• High power contacts (10A) for use in consumer
appliances, HVAC, TV
• Withstands surges of up to 10,000 volts
• Epoxy sealed version available
• UL file E44211; CSA file LR74120
• TÜV file BL980934205001
COIL
Power
At Pickup Voltage 300 mW
(typical)
Max. Continuous 1 W at 20°C (68°F) ambient
Dissipation
Temperature Rise 45°C at nominal coil voltage
Temperature Max. 105°C
2001-01-03
ZETTLERelectronics
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com
AZ672
RELAY ORDERING DATA
COIL SPECIFICATIONS — STANDARD RELAY ORDER NUMBER
Nominal Coil Must Operate Max. Continuous Coil Resistance
VDC VDC VDC ±10% Unsealed Sealed
3 2.25 3.9 17 AZ672–1A–3D AZ672–1A–3DE
5 3.75 6.5 47.2 AZ672–1A–5D AZ672–1A–5DE
6 4.5 7.8 67.9 AZ672–1A–6D AZ672–1A–6DE
9 6.75 11.7 153 AZ672–1A–9D AZ672–1A–9DE
12 9 15.6 272 AZ672–1A–12D AZ672–1A–12DE
24 18 31.2 1,090 AZ672–1A–24D AZ672–1A–24DE
48 36 62.4 4,350 AZ672–1A–48D AZ672–1A–48DE
.787
[20.0]
.138
[3.5]
2X ø.020
[ø0.5]
[7.5]
.295
WIRING DIAGRAM
PC BOARD LAYOUT
VIEWED TOWARDS TERMINALS
VIEWED TOWARDS TERMINALS
[7.5]
.157
2X .012
[4.0]
[2.1]
.083
[0.3]
2X .031
[0.8]
.945
[24.0]
.413
[10.5]
[25.0]
.984
.083
[2.1]
.295
.138
[3.5]
[20.0]
.787
.295
[ø1.3]
4X ø.051
[7.5]
54
13
MECHANICAL DATA
Loading...