ZETTLER AZ765-1A-24D, AZ765-1A-18D, AZ765-1A-12D, AZ765-1C-6D, AZ765-1C-5D Datasheet
...
ZETTLERelectronics
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com
1998-12-15
AZ765
CONTACTS
Arrangement SPST (1 Form A)
SPDT (1 Form C)
Ratings Resistive load:
Max. switched power: 280 W or 1200 VA
Max. switched current: 10 A
Max. switched voltage:150* VDC or 400 VAC
*
Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Rated Load
UL, CUR 10 A at 120 VAC
10 A at 28 VDC
Minimum Load 5 VDC, 0.1 A
Material Silver alloy
Resistance < 50 milliohms initially
(24 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage 253 mW
(typical)
Max. Continuous 1.8 W at 20°C (68°F) ambient
Dissipation 1.6 W at 40°C (104°F) ambient
Temperature Rise 39°C (70°F) at nominal coil voltage
Temperature Max. 105°C (221°F)
SPST SUBMINIATURE
POWER RELAY
FEATURES
• Small footprint
• Low cost
• Epoxy sealed version available
• 10 Amp switching
• UL, CUR File E43203
GENERAL DATA
Life Expectancy Minimum operations
Mechanical 1 x 10
7
Electrical 1 x 105at rated load
Operate Time (typical) 8 ms at nominal coil voltage
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 2500 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation 1000 megohms min. at 20°C
Resistance 500 VDC 50% RH
Dropout Greater than 5% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating -40°C (-40°F) to 65°C (149°F)
Storage -40°C (-40°F) to 105°C (221°F)
Vibration 0.040" DA at 10–50 Hz
Shock 10 g operating, 100 g damage
Enclosure P.B.T. polyester
Terminals Tinned copper alloy, P.C.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 6 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
1998-12-15
ZETTLERelectronics
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com
AZ765
RELAY ORDERING DATA
COIL SPECIFICATIONS ORDER NUMBER*
Nominal Coil Must Operate Max. Continuous Coil
1 Form A 1 Form C
VDC VDC VDC Resistance ± 10%
3 2.25 6.0 20 AZ765–1A–3D AZ765–1C–3D
5 3.75 9.9 55 AZ765–1A–5D AZ765–1C–5D
6 4.5 12.0 80 AZ765–1A–6D AZ765–1C–6D
9 6.75 18.0 180 AZ765–1A–9D AZ765–1C–9D
12 9.0 24.0 320 AZ765–1A–12D AZ765–1C–12D
18 13.5 36.0 720 AZ765–1A–18D AZ765–1C–18D
24 18.0 48.0 1,280 AZ765–1A–24D AZ765–1C–24D
*Add suffix “E” for epoxy sealed version.
MECHANICAL DATA
[1.3]
[1.4]
.051
[1.4]
.055
.055
[10.2]
.402
.150
[0.3]
.012 TYP.
[0.45]
2 x .018 SQR.
[1.0]
.039 TYP.
[18.2]
.717
.585
[14.85]
[3.8]
[12.55]
5 x ø.051
.494
[ø1.3]
[ø1.3]
4 x ø.051
[1.48]
.058
[12.7]
.100
[2.54]
.500
[7.6]
.300.300
[7.6]
FORM C
FORM A
VIEWED TOWARD TERMINALS
FORM C
FORM A
VIEWED TOWARD TERMINALS
WIRING DIAGRAM
PC BOARD LAYOUT
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
Loading...