Whirlpool KDI 1351/3, ARC 6171, ARG 342, ARG 343, ARC 6631 Additional information

F

INL E P GRD

GB

S N DK FIN

TEMPERATURE CONTROL AND OTHER USEFUL TIPS

COLDEST ZONE INSIDE THE REFRIGERATOR

The symbol at the side indicates the coldest zone

in the refrigerator.

The coldest zone usually goes from the glass shelf

of the crisper drawer at the bottom of the

refrigerator to the symbol or rack positioned at

the same height.

To maintain the temperature in this zone, be

careful not to change the position of the rack.

The coldest zone symbol is not indicated in refrigerators with forced air system, as the temperature is

even throughout the entire refrigerator.

TEMPERATURE INDICATOR

For optimum temperature adjustment, the

refrigerator is provided with a temperature

indicator to allow you to control the average

temperature in the coldest zone.

IMPORTANT: The indicator is designed to

operate with this refrigerator only. Do not

use it with any other refrigerator (the

coldest zone is not the same) or for any

other use.

If the refrigerator is provided with a storage compartment, the temperature indicator is located inside

the compartment.

CHECKING THE TEMPERATURE IN THE COLDEST ZONE

 After the appliance has been switched on for at least 24 hours, you can carry out regular checks to

ensure the temperature in the coldest zone is correct and, if necessary, adjust the thermostat as

indicated in the user instructions (chapter "temperature adjustment").

The internal temperature of the refrigerator depends on various factors such as the ambient

temperature of the room, the amount of food stored and how often the door is opened. These

factors should be taken into account when setting the appliance.

To maintain a correct temperature inside the

appliance, check that the indicator is always

green.

If the indicator turns black, the temperature is too

high; in this case, adjust the thermostat setting

and wait for 12 hours before checking the

indicator again.

When fresh food has been introduced or the door

has been left open for some time, it is normal for

the indicator to turn black.

OK

Correct setting Temperature too

high, adjust the

thermostat

1gb00423a.fm Page 1 Wednesday, February 26, 2003 9:56 AM