Whirlpool ELZD 5560 AL-SW, ELZD 5560 IN, ELZD 5560 AL-ST INSTRUCTION FOR USE

ELZD 5560

PRODUCT DESCRIPTION SHEET

DE

First-Last... shelf positions

		1.	Control panel
		2.	Cooling fan* (not visible)
		3.	Top heating element (can be lowered)
		4.	Oven light
		5.	Round heating element (not visible)
		6.	Fan
	Last	7.	Bottom heating element (not visible)
		8.	Lateral standard lamps

9.Oven door hinges

10.Oven cool door

*N.B.: The cooling fan switches on only when the oven has First reached a certain temperature.

The fan can run at two speeds:

1)Full speed

2)Reduced speed

The fan speed depends on the temperature of the appliances. After the oven and/or the cooktop switch off, the cooling fan may, however, continue to run for a certain time to ensure proper cooling.

ACCESSORIES

• Grid

• Grease filter

•Baking tray

•Drip tray

OVEN FUNCTIONS TABLE

Function		Function	Preset	Function description
Symbol	Nr.		temperature/level	(see details in the user’s manual)
–	–	OVEN OFF	-	-
–	–	OVEN LIGHT	-	To switch on the oven light.
	2	MLTF	35C	To keep a constant temperature, either 35°C
		(Heat Maintenance)		or 60°C.
	3	STATIC	200C	To cook food at one shelf level. Preheating.
	4	PASTRY	175C	To cook on two shelf levels, at the same
		(Static + Fan)		temperature.
	5	FAN	160C	To cook on more than one shelf level, at the
				same temperature.
	6	TURBOFAN	160C	To cook: large fruitcakes, stuffed vegetables,
				timbales, poultry.
	7	GRILL	3	To grill small pieces of meat, toast, etc.
	8	TURBOGRILL	3	To grill large pieces of meat.
		(Grill + Fan)
	9	PROGRAMME	P1	To bake pizza, bread, focaccia.
	10	BOOSTER	200C	For fast preheating of the oven.

1.Selector knob: to choose the oven functions.

2.Knob to set time of day, cooking time, the time at which cooking should terminate, the temperatures and the power levels (Function P).

3.Button to select and confirm the different operations (operate by single presses only).

4.Button to select special functions: “Browning” and “Heat Maintenance” .

5.	Control knob for front, left cooking zone*	0	1 ...	10
6.	Control knob for rear, left cooking zone*	0	1 ...	10
7.	Control knob for rear, right cooking zone*	0	1 ...	10	>>
8.	Control knob for front, right cooking zone*	0	1 ...	10	>>

9.Display (the oven display will immediately and easily show the function selected by the knobs for controlling the cook-top).

*) The cooktop control knobs are not interchangeable. After cleaning or servicing, they must be returned to their original position s.

Push-push knobs

•To use this type of knob, press it in the middle.

•Turn the knob to the desired position.

Once cooking is over, turn the knob back to the position marked by “0” and press it again to restore it to its initial setting.

COOKTOP FUNCTIONS TABLE

	Function	Function	Function description
	symbol		(see details in the user’s manual)
		KEEP WARM	Constant temperature, 60°C.
		DUAL ZONE	To extend the heated area of the second part of oval or rectangular cooking zones.
		ICP	To accelerate the heating of the selected cooking zone.
		FAST BOILING	To bring the water to the boil fast.
		GENTLE HEAT	Constant temperature, 35°C.
	1-10	POWER LEVELS	-

STARTING THE OVEN

When the oven is connected to the power supply for the first time, or re-connected after a power failure, the display shows “ ”.

To start the oven:

•turn knob 1 with index at the top as in fig. 1 of programmer sheet.

•press button 3. The display shows “--:--”.

FOR A DESCRIPTION ON HOW TO USE THE OVEN, PLEASE REFER TO THE PROGRAMMER DESCRIPTION SHEET.

5019 410 54571