Whirlpool ER2CHMXP, ET1FTKXK, ET1CHEXS, ET1CHMXK, ER2MHKXP User Manual
...
®
Refrigerator
PRODUCT MODEL NUMBERS
ER2CHMXP ET8FTEXR ER2MHKXP ET8FTEXS ET1CHEXS ET8LFKXK ET1CHMXK ET8MHEXR ET1FTEXS ET8MHKXM ET1FTKXK ET8MHMXR ET1LFKXK ET8WTEXM ET1MHEXR ET8WTKXK ET1MHKXM ET8WTMXK ET1MHMXR GR2FHMXP ET1PHKXP GR9FHKXP ET8CHEXS GR9FHMXP ET8CHKXK GT2SHKXM ET8CHMXK GT2SHMXM
Electrical: A 115 Volt, 60 Hz., AC only 15 or 20 amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.
Water: Connect the ice maker to a cold water line with water pressure between 30 and 120 psi.
If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the system needs to be a minimum of 40 to 60 psi (276 - 414 kPa).
IMPORTANT: The pressure of the water coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi
(207 - 827 kPa).
OVERALL DIMENSIONS
|
B |
|
B |
A |
A |
not incl. |
1 |
|
|
handle |
|
D |
E |
D |
overall |
top of |
|
top of |
|
cabinet |
cabinet |
4 |
E |
|
||
|
|
overall |
|
C |
C |
|
|
Standard |
Integrated |
|
Model |
||
Model |
||
|
|
Depth |
|
Cab. Width |
Door Width |
Cab. Height |
Overall Height |
Model size |
“A” |
|
“B” |
“C” |
“D” |
“E” |
STANDARD MODELS |
|
|
|
|
||
18 cu.ft. |
29 3/8” |
|
29 1/2” |
29 3/4” |
65 1/2” |
66 1/4” |
19 cu.ft. |
30 3/4” |
|
29 1/2” |
29 3/4” |
65 1/2” |
66 1/4” |
21 cu.ft. |
29 3/8” |
|
32 1/2” |
32 3/4” |
65 1/2” |
66 1/4” |
22 cu.ft. |
30 3/4” |
|
32 1/2” |
32 3/4” |
65 1/2” |
66 1/4” |
INTEGRATED MODELS |
|
|
|
|
||
|
|
|
|
|
|
|
19 cu.ft. |
31 1/2” |
|
29 1/2” |
30 1/8” |
65 1/2” |
66 1/2” |
22 cu.ft. |
31 1/2” |
|
32 1/2” |
33 1/8” |
65 1/2” |
66 1/2” |
|
|
|
|
|
|
|
LOCATION REQUIREMENTS
3 " (7.5 cm)
1/2" (1.25 cm)
2" (5.08 cm)
To ensure proper ventilation for your refrigerator, allow for 1⁄2 in. (1.25 cm) space on each side and at the top. (At the top, when using half depth cabinet, use top
of cabinet height “D” dimension. When using full depth cabinet, use overall “E” dimension.) When installing your refrigerator next to a fixed wall, leave 2 in. (5.08 cm) minimum on each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.
NOTE: Do not install the refrigerator near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 55°F (13°C).
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation |
Ref. 2314472 |
Instructions packed with product. Specifications subject to change without notice. |
02-22-07 |
Loading...