Vitek VT-5010 SR User Manual [ru, de, en]
PORTABLE 7" TFT LCD COLOR TV
MODEL VT5010 SR
4
8
12
16
www.vitekaus.com
INSTRUCTION MANUAL
5010.qxd 14.06.05 10:24 Page 1
2
5010.qxd 14.06.05 10:24 Page 2
3
5010.qxd 14.06.05 10:24 Page 3
SAFETY MEASURES
1. Never repair the television yourself. If something seems
strange, unplug the television and seek guidance from
the dealer where you purchased the device. The televi
sion contains a lot of sensitive electronic components,
which you could damage or break if you open the televi
sion or attempt to repair it.
2. Do not expose the television to high levels of moisture,
dust, steam, oil, smoke, direct sunlight and etc.
3. Do not use solvents or other chemical reagents. Wipe the
television with a soft cloth if it gets dirty.
4. Do not leave the television in extremely hot or cold
places. The allowable temperature range for storage of
the device is from 25 to +60°C. The allowable operating
temperature range is from 0 to +40°C.
5. Use only the adapters and power sources indicated in
these instructions.
6. Turn off the television as soon as you are finished watch
ing it and disconnect the adapter from the AC outlet.
7. Do not throw the television or subject it to strong
mechanical influence.
Drivers of motor vehicles should no watch the television
or attempt to adjust it while driving (for safety rea
sons). Remember that in some countries this is prohib
ited by law. The appearance of several light or dark
dots on the screen does not mean that the television is
broken; this is normal for liquid crystal technology.
DESCRIPTION OF CONTROLS
1. Power On indicator
2. Remote control sensor
3. Volume down button
4. Volume up button
5. Channel up button
6. Channel down button
7. Menu button
8. TV/AV selector
9. Power On/Off button
10. Table stand
11. Antenna
12. External antenna jack
13. Audio input jack
14. Video input jack
15. Headphones jack
16. Power supply 12 V jack
POWER SOURCES
This television can operate on the following power sources:
a) AC electrical power (connection though AC adapter);
b) Cigarette lighter jack for 12 V negativelygrounded DC car
power systems (connect through the cigarette lighter jack
with a car that has a 12 V direct current negativelygrounded
power system using the car adapter).
ENGLISH
4
5010.qxd 14.06.05 10:24 Page 4
REMOTE CONTROL UNIT
Note
1. When using the remote control unit aim it at the remote
control sensor on the TV body
2. Do not expose the remote control unit to water, moisture,
shock or falls.
3. When using the remote control unit, the interval between
button pushes should be less than two seconds.
1. Channel search buttons (CH)
To change to a higher number channel, press the
CH
#
button.
To change to a lower number channel, press the
CH
$
button.
2. Volume adjustment buttons (VOL)
To increase the volume, press VOL+
#
.
To decrease the volume, press VOL
$
.
3. MUTE button
If you want to turn off the sound, press this button.
Press the button again to restore the sound.
4. Image MODE button
Press the MODE button repeatedly to choose the desired
image mode: standard, soft, bright, light.
5. Numerical buttons
Using these buttons you can choose from 255 channels
(from 0 to 254). If the channel number consists of one
digit, then use the 09 buttons. If the channel number
consists of two digits, then first press the / buttons
until the "" symbol appears on the screen, after which
use the 09 buttons to enter the desired channel number.
If the channel number consists of three digits, then press
the / button twice the "" symbol should appear on
the display, after which you can use the 09 buttons to
enter the channel number.
6. Flip display in horizontal direction
7. Flip display in vertical direction
8. Image format button
16:9 standard;
16:9 enlarged;
4:3 standard.
9. Previous channel button
Press this button to return to the previous channel.
10. AUTOsearch button
Press and hold the AUTO button for several seconds and
automatic channel searching will begin.
11. VIDEO mode button
To choose Video or TV, press the VIDEO.
12. Calendar button (CALE)
Press the CALE button. Use the CH
#
/CH$and
VOL+
#
/VOL $buttons to set the current year and
month.
13. Menu language selection button (LANG)
Press the LANG button to choose the menu language:
English, Italian, Spanish, Portugal, German, Arabic,
Chinese or Russian.
14. Power off timer button (TIMER)
Press the timer button repeatedly until the desired
amount of minutes until power off is displayed on the
screen; after the timer gets to zero, the television will
automatically shut off. The maximum number of minutes
is 120.
15. Power on/off button (POWER)
Use the POWER button to turn the television on/off.
16. Button for displaying the current channel number
(CALL)
To reveal the channel number on the screen, press the
CALL button.
17. MENU button
Press the menu button to choose one of the various
menus: Picture, Option, Clock, System, Preset.
ENGLISH
5
5010.qxd 14.06.05 10:24 Page 5
SETUP YOUR TV
Press the Menu button to enter setup menu:
PICTURE
Adjust the image quality.
Press the CH button to choose the mode: CONTRAST,
BRIGHT, COLOR, SHARP.
Then use the VOL+ and VOL buttons to adjust the image
quality; increase (V+) or decrease (V) the parameters.
OPTION
Press the CH button to choose the mode: LANGUAGE, CAL
ENDAR, GAME
LANGUAGE
Using the VOL+ and VOL buttons you can choose the menu
language: English, Italian, Spanish, Portugal, German,
Arabic, Chinese or Russian.
CALENDAR
Using the VOL+ and VOL buttons enter the "calendar"
menu. Press the CH buttons to choose the year, press VOL
buttons to choose month. Press the POWER button to exit
the calendar.
GAME
Using the VOL+ and VOL buttons enter the "game" menu.
To control the figures, use VOL (move left), VOL+ (move
right), CH (speed up) and CH+ (rotate 360°). Press the
POWER button to exit the game.
CLOCK
Press the CH button to choose the mode: Time, On Time, Off
time, Attention, Channel time, Position. Use the VOL button
to set the hours and the VOL+ button to set the minutes.
Note: set the current time first and then the other parame
ters.
SYSTEM
Adjust the display system.
Press the CH buttons, choose the mode: Color system,
Sound system, Blue background, Picture mode.
Use the VOL+ and VOL buttons to choose the sound best
suited for the current channel.
Using the VOL+ and VOL buttons you can turn the blue
background on/off when there is no signal.
Press the CH button to choose one of Picture mode param
eters:
Horizontal, Vertical, Zoom. Then use the VOL+ and VOL but
tons to set the desired parameters for each menu item.
PRESET
Use the CH button to choose one of these parameters:
Program number (Position), Remember, Band, Swap, Fine
Tuning, Search, Autosearch. Then use the VOL+ and VOL
buttons to set the desired parameters according to each
menu item.
USING YOUR TV
Connect the television to the AC power supply and press the
POWER button in order to turn on the television. Extend the
antenna fully and point it in the needed direction. Choose
the desired channel using the CH
#
/CH$buttons or
numerical keys on the remote control unit. Set the desired
volume using the VOL+
#
/VOL $buttons.
Change the length, angle and direction of the antenna in
order to achieve better image quality.
Note
• Use an external antenna in areas with poor signal recep
tion.
• Stow the antenna after turning off the television.
USING AN EXTERNAL ANTENNA
For best signal reception, connect the television to an exter
nal antenna suing the antenna adapter.
LISTENING WITH HEADPHONES
Headphones (3.5 mm) connect to the jack located on the
backside panel of the television.
MALFUNCTIONS AND SOLUTIONS
Carryout the following recommendations before contacting
a service center.
Condition Cause of malfunction
No image or sound • The power cord is incorrectly con
nected
• The television is off
No image • The channel is not tuned properly
No sound • The volume is not set correctly
•The headphones are not connected
• Weak signal
The image is too dark • The brightness and contrast are
not set correctly
Fuzzy image or • The antenna is not positioned
"snowlike" static correctly
• The television is located near
a building, high voltage lines,
construction site, neon light or trains
ENGLISH
6
5010.qxd 14.06.05 10:24 Page 6
Loading...