Viking VCFB5363LDG, VCRB5303RAB, VCRB5303LSM, VCRB5303LSB, VCRB5303LRE Installation Manual

Installation

All Refrigerator / All Freezer

VCRB5303 / VCRB5363 / CVCRB5303 / CVCRB5363 VCFB5303 / VCFB5363 /CVCFB5303 / CVCFB5363

Table of Contents

Warnings & Important Information ___________________________________________________________________ 2 Tipping Radius and Door Swing ________________________________________________________4 Professional

Dimensions & Specifications (30” & 36”) ___________________________________________________ 6 Dimensions & Specifications (30” & 36” with flush mount trim) _____________________________ 8 Cutout Dimensions (30”) _________________________________________________________________ 10 Anti-Tip Dimensions (30”)________________________________________________________________ 11 Cutout Dimensions (36”) _________________________________________________________________ 12 Anti-Tip Dimensions (36”) ________________________________________________________________ 13 Dimensions (Dual 30”/ Dual 30” & 36” & Dual 30”/ Dual 30” & 36” with flush mount trim )___ 14 Specifications (Dual 30”/ Dual 30” & 36” & Dual 30”/ Dual 30” & 36” with flush mount trim ) _ 18 Cutout Dimensions (Dual 30”) ____________________________________________________________ 20 Anti-Tip Dimensions (Dual 30”) ___________________________________________________________ 21 Cutout Dimensions (Dual 30” & 36”)_______________________________________________________ 22 Anti-Tip Dimensions (Dual 30” & 36”)______________________________________________________ 23

Cutout Dimensions (Dual 36”)_____________________________________________________________ 24

Anti-Tip Dimensions (Dual 36”)____________________________________________________________25 Cabinet Information _____________________________________________________________________ 26 Cabinet Information (with flush mount trim) ______________________________________________ 28 Custom Side Panel Dimensions _______________________________________________________________ 30 Custom Side Panel Dimensions (with flush mount trim) ________________________________________ 31 General Information __________________________________________________________________________ 33 Unpacking & Moving _____________________________________________________________________ 34 Flush Mount Side Trim Installation ____________________________________________________________ 35 Installation ___________________________________________________________________________________ 35 Hinge Adjustment ________________________________________________________________________ 36 Kickplate Installation _____________________________________________________________________ 38 Door Stop Adjustment____________________________________________________________________ 39 Final Installation _________________________________________________________________________ 39 Performance Checklist ________________________________________________________________________ 41 Control Panels________________________________________________________________________________ 42 Service & Registration ________________________________________________________________________ 43

Your safety and the safety of others is very important.

We have provided many important safety

messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others.

All safety messages will be preceded by the safety alert symbol and the word“DANGER” or “WARNING.”These words mean:

D A N G E R

You will be killed or seriously injured if you don’t follow instructions.

W A R N I N G

You can be killed or seriously injured if you don’t follow instructions.

All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

2

IMPORTANT–Please Read and Follow!

•Make sure that incoming voltage is the same as unit rating. An electric rating plate specifying voltage, frequency, wattage, amperage, and phase is attached to the product.

•To reduce the risk of fire, electric shock, or injury to persons, installation work and electrical wiring must be done by qualified people in accordance with all applicable codes and standards, including firerated construction.

•The installer should leave these instructions with the consumer who should retain them for local inspector’s use and for future reference.

A GFI shall be used if required by NFPA-70 (National Electric Code), federal/state/local laws, or local ordinances.

•The required use of a GFI is normally related to the location of a receptacle with respect to any significant sources of water or moisture.

•Viking Range, LLC will NOT warranty any problems resulting from GFI outlets which are not installed properly or do not meet the requirements below.

If the use of a GFI is required, it should be:

•Of the receptacle type (breaker type or portable type NOT recommended)

•Used with permanent wiring only (temporary or portable wiring NOT recommended)

•On a dedicated circuit (no other receptacles, switches or loads in the circuit)

•Connected to a standard breaker of appropriate size (GFI breaker of the same size NOT recommended)

•Rated for Class A (5 mA +/- 1 mA trip current) as per UL 943 standard)

•In good condition and free from any loose-fitting gaskets (if applicable in outdoor situations)

•Protected from moisture (water, steam, high humidity) as much as reasonably possible

It is your responsibility to:

•comply with installation specifications and dimensions.

•properly install unit.

•remove any moldings or decorative panels that prevent the unit from being serviced.

•make sure that you have these materials (not provided with your unit), which are necessary for proper installation:

•1/4” (6 mm) copper tubing with shutoff valve

•6– #8 x 3” (7.6 cm) wood screws (longer screws may be required)

•1– Saddle valve (do not use self-piercing feature of the valve)

•assure that floor will support unit, door panels and contents (approximately 1200 pounds [540 kg]).

•provide a properly grounded electrical outlet.

•assure that location will permit appliance doors to open 90° minimum.

A R N I N G

ELECTRICAL SHOCK HAZARD

Disconnect power or turn power disconnect switch to OFF position before removing

top grille. Failure to do so can result in death or electrical shock.

Most of the unit’s weight is at the top. Extra care is needed when moving the unit to prevent

tipping. Use cardboard shipping material or plywood under unit until it is installed in the operating position to protect floor surface.

W A R N I N G

TIP OVER HAZARD

Appliance is top heavy and tips easily

when not completely installed. Keep doors closed until appliance

is completely installed

and secured per installation instructions.

Use two or more people to move and install appliance. Failure to do so can result in death or serious injury.

3

Tipping Radius and Door Swing

30” All Refrigerator/All Freezer	36” All Refrigerator/All Freezer
Door Swing	Door Swing

		14-5/8”
		(37.1 cm)
		10-1/8”
		(25.7 cm)
		24-15/16”
		(63.3 cm)
		26-5/8”
		(65.1 cm)
		28-1/3”
	90º	(71.9 cm)
110º
120º

17-5/8”

(44.8 cm)

12-3/16”

(31.0 cm)

			30-3/16”
			(76.7 cm)
			32-1/2”
			(82.6 cm)
	110º	90º	34-3/8”
			(87.3 cm)
	120º

30” All Refrigerator/All Freezer

Side Tip

112 7/8” (286.7 cm)

30” (76.6 cm)

82 3/4”

(210.1 cm) 88 1/16”

(223.7 cm)

4

Tipping Radius and Door Swing

36” All Refrigerator/All Freezer

Side Tip

118 7/8” (302.0 cm)

36” (94.4 cm)

82 3/4”

(210.1 cm) 90 3/16”

(229.1 cm)

30” and 36” Back Tip

	86 1/8”	85 1/2”
	(218.8 cm)
		(217.2 cm)
		82 3/4”
		(210.1 cm)
		24” (61.0 cm)

5

Dimensions

30” All Refrigerator/All Freezer

				30”
3–				(76.
	19/32”			2	cm)
(9.1		cm)

75
–
	15/16”
(192.
	9	cm)			-1/2”
			26
					.3 cm)
					(67

29”
(73.7	cm)

9–
5/32”
(23.3	cm)

3–
19/32”
(9.1	cm))

36” All Refrigerator/All Freezer

				35”
	36”		(88.9		cm)
(91.5		cm)

9–
5/32”
(23.3	cm)

82	–3/4”
(210.
	2 cm)
min.
	to
84–1/16”
(213.
	5 cm)
max.

75
–
	15/16”
(192.
	9	cm)

				–		3/		4	”
		0
	2
							cm)
				.7
	(52								”
						/16
	22		–		3		cm)
					4
				.
	(56
		24”
				0 cm)
			.
	(61

26-1/2” (67.3 cm)

82	–3/4”
(210.
	2 cm)
min.
	to
84–1/16”
(213.
	5 cm)
max.

				–		3/		4	”
		0
	2
							cm)
				.7
	(52								”
						/16
	22		–		3		cm)
					4
				.
	(56
		24”
				0 cm)
			.
	(61

6

Specifications

30” All Refrigerator/All Freezer

Description	VCFB/CVCFB	VCRB/CVCRB
Overall width	30” (76.2 cm)
Overall height from bottom	82-3/4” (210.2 cm) min. to 84-1/16” (213.5 cm) max.
Overall depth from rear	To front edge of side trim:	22-3/16” (56.4 cm)
	To front of top grille:	24” (61.0 cm)
	To front of handle endcap:	26-1/2” (67.3 cm)
Cutout width	29-5/8” (75.2 cm) min. to 29-3/4” (75.6 cm) max.
Cutout height	82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.
Cutout depth	24” (61.0 cm) min.
Electrical requirements	115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with
	grounded 3-prong plug attached to product
Maximum amp usage	9.1 amps	5.7 amps
Inlet water requirements	1/4” copper tubing inlet
	waterline; minimum 20 psi;	N/A
	maximum 120 psi
Overall interior dimensions
Total capacity	15.9 cu. ft. (450 liters)	17.8 cu. ft. (504 liters)
Approximate shipping weight	550 lbs. (247.5 kg)	525 lbs. (236.3 kg)

36” All Refrigerator/All Freezer

Description	VCFB/CVCFB		VCRB/CVCRB
Overall width	36” (91.5 cm)
Overall height from bottom	82-3/4” (210.2 cm) min. to 84-1/16” (213.5 cm) max.
Overall depth from rear	To front edge of side trim:		22-3/16” (56.4 cm)
	To front of top grille:		24” (61.0 cm)
	To front of handle endcap:		26-1/2” (67.3 cm)
Cutout width	35-5/8” (90.5 cm) min. to 35-3/4” (90.8 cm) max.
Cutout height	82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.
Cutout depth	24” (61.0 cm) min.
Electrical requirements	115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with
	grounded 3-prong plug attached to product
Maximum amp usage	9.5 amps		6.5 amps
Inlet water requirements	1/4” copper tubing inlet
	waterline; minimum 20 psi;		N/A
	maximum 120 psi
Overall interior dimensions
Total capacity	19.2 cu. ft. (544 liters)		22.0 cu. ft. (623 liters)
Approximate shipping weight	605 lbs. (272.3 kg)		590 lbs. (265.5 kg)

7

Dimensions

30” All Refrigerator/All Freezer

with Flush Mount Trim

3–19/32”
(9.1	cm)

75
–
	15/16”
(192.
	9	cm)

				29”
30”			(73.7		cm)
(76.2	cm)

		1/2”
	–
	26	.3 cm)
	(67

9–
5/32”
(23.3	cm)

3–19/32”
(9.1	cm)

36” All Refrigerator/All Freezer

with Flush Mount Trim

			35”
		(88.9		cm)
	36”
	(91.5	cm)

9–
5/32”
(23.3	cm)

82	–3/4”
(210.
	2 cm)
min.
	to
84–1/16”
(213.
	5 cm)
max.

75
–
	15/16”
(192.
	9	cm)	–
			26	1/2”
				.3 cm)
			(67

			–	3/		4	”
		0
	2
					cm)
			.7
	(52
				3/8”
	23		–
					cm)
			4
			.
	(59
		24”
		.	0 cm)
	(61

Note: Flush Mount Trim (PBIRFTKSS) purchased separately.

82	–3/4”
(210.
	2 cm)
min.
	to
84–1/16”
(213.
	5 cm)
max.

			–	3/		4	”
		0
	2
					cm)
			.7
	(52
				3/8”
	23		–
					cm)
			4
			.
	(59
		24”
		.	0 cm)
	(61

8

Specifications

30” All Refrigerator/All Freezer with Flush Mount Trim

Description	VCFB/CVCFB Flush Mount	VCRB/CVCRB Flush Mount
Overall width	30” (76.2 cm)
Overall height from bottom	82-3/4” (210.2 cm) min. to 84-1/16” (213.5 cm) max.
Overall depth from rear	To front edge of side trim:	23-3/8” (59.4 cm)
	To front of top grille:	24” (61.0 cm)
	To front of handle endcap:	26-1/2” (67.3 cm)
Cutout width	30” (74.9 cm)
Cutout height	82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.
Cutout depth	24” (61.0 cm) min.
Electrical requirements	115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with
	grounded 3-prong plug attached to product
Maximum amp usage	9.1 amps	5.7 amps
Inlet water requirements	1/4” copper tubing inlet
	waterline; minimum 20 psi;	N/A
	maximum 120 psi
Overall interior dimensions
Total capacity	15.9 cu. ft. (450 liters)	17.8 cu. ft. (504 liters)
Approximate shipping weight	550 lbs. (247.5 kg)	525 lbs. (236.3 kg)

36” All Refrigerator/All Freezer with Flush Mount Trim

Description	VCFB/CVCFB Flush Mount	VCRB/CVCRB Flush Mount
Overall width	36” (91.5 cm)
Overall height from bottom	82-3/4” (210.2 cm) min. to 84-1/16” (213.5 cm) max.
Overall depth from rear	To front edge of side trim:	23-3/8” (59.4 cm)
	To front of top grille:	24” (61.0 cm)
	To front of handle endcap:	26-1/2” (67.3 cm)
Cutout width	36” (91.4 cm)
Cutout height	82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.
Cutout depth	24” (61.0 cm) min.
Electrical requirements	115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with
	grounded 3-prong plug attached to product
Maximum amp usage	9.5 amps	6.5 amps
Inlet water requirements	1/4” copper tubing inlet
	waterline; minimum 20 psi;	N/A
	maximum 120 psi
Overall interior dimensions
Total capacity	19.2 cu. ft. (544 liters)	22.0 cu. ft. (623 liters)
Approximate shipping weight	605 lbs. (272.3 kg)	590 lbs. (265.5 kg)

9

Cutout Dimensions

30” All Refrigerator/All Freezer

24”
(61	.0 cm)

See Anti-Tip board installation

9” (22.9 cm)

Electric Outlet Location

6” (15.2 cm)

9” (22.9 cm)

82–
(210.5			7/8”
		cm)
anti-					min
	tip						.
			board			&
opening
				height

	84–
			1/16”
	(213.	5
	anti-		cm)			max.
	tip
				board				&
	opening
					height

				(75.			29		–
				29-		2		cm)		5/8”
		(75.				to				min.
			6	cm)	3/4		”
Flush		3			max.
	2cm)
	(76.		0”
	Mount		only

73	–3/8”
(186.
	4 cm)

Water Line Entry Area

Note: Shown for All Freezer Only

5/8”
(1.
5	cm)

3
–
2		5/8”
(9.	cm)

						30”
					(76.		2 cm)
			Flush
						Mount					only
					29
						–
					(75.		5/8”
7	–					2			cm)
		5/8”
(19.					6	–
		4
			cm)			3/4”
					(17.
	3”					1		cm)
(7.
	6	cm)

5/8”
(1.
5	cm)

10	–		10	–
(27.			(26.
	3/4”			1/2”	(1. 5/8”
3			7cm)
	cm)				5	cm)
	waterOptional		floor
	line
		entry

1” (2.5 cm)

10

Anti-Tip Dimensions

30” All Refrigerator/All Freezer

Anti-Tip Location

	79–
	(201.6				3/8”
					cm)
	to								min.
		bottom
									of
	anti-			tip
							board
	80–
	(204.6				1/2”
					cm)
	to							max.
		bottom							of
	anti-			tip
							board

Two 2”x 4” mounting boards 3” (7.6 cm) x 3-1/2” (8.9 cm)

	3”
(7	.6	cm)

23”
(58.4	cm)

3–
1/2”
(8.9	cm)

NOTE: If unit is installed deeper than 24” (61.0 cm),then shim behind the mounting

board by the difference.

Flush Mount Anti-Tip Location

One 2”x 4” mounting board 1–1/2” (3.8 cm) x 3-1/2” (8.9 cm)

1–1/2”
(3	.8	cm)

23”
(58.4	cm)

3–
1/2”
(8.9	cm)

Bottom of anti-tip board is 3–7/8” (9.8 cm) below opening height.
Note: Top of unit must be placed firmly under anti-tip board.	NOTE: If unit is installed deeper than
	24” (61.0 cm), then shim behind the mounting
		board by the difference.

11

Cutout Dimensions

36” All Refrigerator/All Freezer

24”
(61	.0 cm)

See Anti-Tip board installation

9”

(22.9 cm)

Electric Outlet Location

6” (15.2 cm)

9” (22.9 cm)

82–
(210.5			7/8”
		cm)
anti-					min
	tip						.
			board			&
opening
				height

	84–
			1/16”
	(213.	5
	anti-		cm)			max.
	tip
				board				&
	opening
					height

				(90.				35		–
				35			5		cm)		5/8”
		(90.			-		to				min.
			8	cm)		3/4		”
Flush	(9	1. 36”				max			.
		4cm)
	Mount		only

73–3/8” (186.4 cm)

Water Line Entry Area

Note: Shown for All Freezer Only

5/8”
(1.
5	cm)

3
–
2		5/8”
(9.	cm)

						36”
					(91.		4 cm)
			Flush
						Mount				only
					35
						–
					(90.		5/8”
7	–						5		cm)
		5/8”
(19.					6
		4				–
			cm)			3/4”
					(17.
	3”					1		cm)
(7.
6		cm)

5/8”
(1.
5	cm)

	10	–
	(27.
		3/4”
	3
		cm)

waterOptional		floor
line
	entry

10	–
7	1/2”
(26.	cm)
	(1. 5/8”
	5	cm)

1” (2.5 cm)

12

Anti-Tip Dimensions

36” All Refrigerator/All Freezer

Anti-Tip Location

		79–
	(201.6				3/8”
					cm)
	to								min.
			bottom
									of
	anti-			tip
		80–					board
	(204.6				1/2”
					cm)
	to							max.
			bottom						of
	anti-			tip
							board

Two 2”x 4” mounting boards 3” (7.6 cm) x 3-1/2” (8.9 cm)

	3”
(7	.6	cm)

29–
1/2”
(74.9	cm)

3–
1/2”
(8.9	cm)

NOTE: If unit is installed deeper than 24” (61.0 cm), then shim behind the mounting

board by the difference.

	Flush Mount Anti-Tip Location
			One 2”x 4” mounting board
			1–1/2” (3.8 cm) x 3–1/2” (8.9 cm)
	1–1/2”
	(3	.8	cm)
			29–
			1/2”
			(74.9	cm)
3–
1/2”
(8.9	cm)

	Bottom of anti-tip board is 3–7/8” (9.8 cm) below opening height.
		NOTE: If unit is installed deeper than
	Note: Top of unit must be placed firmly under anti-tip board.
		24” (61.0 cm), then shim behind the mounting
			board by the difference.

13

Dimensions

Dual 30” All Refrigerator/All Freezer*

3–19/32”
(9.1	cm)

3	0”	30”
(76.2 cm)
	(76.2		cm)

29”
(73.7	cm)

	30”
(	76. 30”
	2 c
	m)
	(76.2	cm)

29”
(73.7	cm)

9–
5/32”
(23.3	cm)

75
–
(19215/16”
.
9	cm)

	26	-1/2”
		.3 cm)
	(67

(2.	1”
54 cm)
Between
	U
	nits

	20		–	3/4”
					cm)
			.7
	(52
			3/16”
	22	–			cm)
			.4
	(56
	24”
		.0		cm)
	(61

82–3/4”
(210.2 cm)
min.		Dual 30” & 36” All Refrigerator/All Freezer*
84–1
to
	/16”
(213.5 cm)
max.

3–19/32”
(9.1	cm)

29”
(73.6	cm)

	30”
	(76.2		cm)
	30”			36”
	(76.2
		cm)		(91.5	cm)

35”
(88.9	cm)

9–
5/32”
(23.3	cm)

75–
(19215/16”
.9	cm)

			82–3/4”
	-1/2”		(210.2 cm)
26			min.
	.3	cm)	to
(67			84–1/16”
			(213.5 cm)
			max.

(2.	1”
54 cm)
Between		Units

	20		–	3/4”
					cm)
			.7
	(52
			3/16”
	–				m)
	22		.4		c
	(56
	24”
		.0		cm)
	(61

*Shown with optional one-piece grille kit

14