tekmar 10K User Manual

- Data Brochure
0
D 002
10K Temperature Simulator
10K Temperature Simulator 002
130
110
°F
80
95
Do not apply power to any terminals
40
55
35
32
27
45
75
85
Date
S/N
140
150
170
190
210
230
32
50
10
60
-10
65
70
70
-45
-40
80
90
°F
Wire To Control Being Tested
The tekmar 10K Temperature Simulator 002 can be used to test any tekmar control using 10K thermistor sensors. With this simulator, checking control operation on a counter or in a boiler room is a simple process. The simulator is also ideal for use at trade shows or product training schools to demonstrate the features and operation of various tekmar controls. Up to three different sensors can be individually simulated using the three separate rotary switches. The simulator is designed to provide sensor resistance values for a 10k @ 77°F (25°C ± 0.2°C), ß=3892, NTC thermistor. Other controls that use thermistor sensors with a different resistance curve can- not be tested correctly with this simulator. (This includes all older tekmar controls with 2K sensor inputs.)

Sequence of Operation

After connecting up the simulator and applying power to the control being tested, simulation can begin. Using the data brochure for the control being tested, select tem­peratures from the simulator to verify the operation of the control.
As an example, Figure 3 shows a One Stage Boiler Control 250 being tested. The following are typical features you can test with the simulator — WWSD, Boiler Minimum, Boiler Differential and Heating Curve. Some calculations may be required to determine if correct con­trol operation is taking place.
Note: Understanding the operation of the control being tested is required to ensure correct conclu­sions are made. Do not apply power to the simulator as damage to the simulator may result.
Temperature #2
Selector (Yellow)
Wiring for Temperature
Dial #2 (Yellow)
Temperature #1
Selector (Red)
10K Temperature Simulator 002
140
130
110
°F
230
Do not apply power to any terminals
°F
Wiring for Temperature
Dial #1 (Red)
09/94
Date
S/N
150
170
190
210
-10
-45
-40
Temperature #3
Selector (Blue)
Wiring for Temperature
Dial #3 (Blue)

Installation

Blue Dial (Wiring)
The blue dial temperature settings have been selected to be repre­sentative of outdoor air temperatures. The two blue wires running from the simulator are typically connected to the input terminals of the outdoor sensor of a tekmar control (see figure 3).
Red Dial (Wiring)
The red dial temperature settings have been selected to be repre­sentative of boiler supply temperatures. The two red wires running from the simulator are typically connected to the input terminals of the supply sensor of a tekmar control (see figure 3).
Yellow Dial (Wiring)
The yellow dial temperature settings have been selected to be representative of indoor feedback readings. The two yellow wires running from the simulator are typically connected to the 10K Sen input terminals of a tekmar control.
In North America: tekmar Control Systems Ltd., Canada
tekmar Control Systems, Inc., U.S.A. Head office: 4611 - 23rd Street Vernon, B.C. Canada V1T 4K7 Tel. (604) 545-7749 Fax. (604) 545-0650
Product design and literature are Copyright © 1994 by: tekmar Control Systems Ltd. and tekmar Control Systems, Inc.
Using the tekmar 10K Temperature Simulator to test
the operation of a Boiler Reset control.
Date
10K Temperature Simulator 002
110
°F
80
Do not apply power to any terminals
40
35
32
27
45
85
S/N
140
150
130
170
190
95
210
230
32
10
55
-10
65
-45
70
-40
75
90
°F
For Aux. 10K Input (Not used in this example)
To 120 V ac
Power Source
50
60
70
80
Class II Transformer
All specifications are subject to change without notice.
Printed in Canada on recycled paper.
H1097
Enclosed Energy
110
°F °F
50 170
Minimum
One Stage Boiler Control 250
Power
R
LR 58223
Heating
Curve
2.0
0.4 3.6
CLASS 2 CIRCUITS ONLY; CC-CU 20 AWG or larger wire, 60°C, 30
1C2R3Ht4
Power 24V 2VA Relay 24V 48VA
Ht
Management
Equipment
Test
R
E150539
242
Differential
UnOcc WWSD Minimum Boiler On
Date
S/N
WWSD
Listed 5T62
55
UnO
Jumper
Sw
22
70
°F
85
5
6
7
Com
Sup
Out
Sen
Sen
Sen
Figure 3
8
Loading...