Teac Smart & Elite User Manual

TEAC Flash Drive Smart & Elite User’s Guide

User's Guide

(Rev 1.0 28/10/2003)

Flash Drive

Smart & Elite

TEAC Flash Drive Smart & Elite User’s Guide Page 1 of 14

Table Of Contents Page

1 FLASH DRIVE SMART & ELITE’S FEATURES 2

2 USING YOUR FLASH DRIVE SMART & ELITE 3

3 FLASH DRIVE SMART & ELITE DRIVER

INSTALLATION FOR WINDOWS98 AND
WINDOWS98 SE

3

3.1 FILES LIST 3

3.2 PROCEDURE FOR INSTALLING FLASH
DRIVE SMART & ELITE DRIVER AND

CONTROLLER. (Windows98 & 98’SE):

4

4 FLASH DRIVE SMART & ELITE SPECIFICATIONS 9

5 WARRANTY AND CERTIFICATION

INFORMATION

10

6 LICENSE GRANT 12

7 TRADEMARKS 13

8 SALE AND TECHNICAL SUPPORT SERVICES 14

TEAC Flash Drive Smart & Elite User’s Guide Page 2 of 14

1 FLASH DRIVE SMART & ELITE’S FEATURES

Flash Drive Smart & Elite epitomizes plug & play. No more troublesome installation of drivers
to detect the drive on most operating systems. Simply plug in the Flash Drive Smart & Elite to
the USB port on any laptop or desktop and start transferring your files. With faster data transfer
rate and higher storage capacity; this revolutionary portable storage device will replace your
floppy disks and drives.

• Supports USB 2.0 and USB 1.1.

• Bus-powered with no external power supply.

• Mass storage compliant.

• Hot Plug (Plug and Play) via USB port.

• No mechanical drive, well-integrated smart Removable Storage Device.

• No installation required+

• Compact, light and very low power consumption.

• Capacity: 128MB/256MB/512MB.

• Disk write protection switch to protect your files/data from being

overwritten.

• 10-years of data retention.

+

Except for Windows 98 & Windows 98SE, which requires driver installation

TEAC Flash Drive Smart & Elite User’s Guide Page 3 of 14

2 USING YOUR FLASH DRIVE SMART & ELITE

+

1. Remove the cap from the Flash Drive Smart & Elite.

2. Insert Flash Drive Smart & Elite into the USB port

3. Read or write your data.

3 FLASH DRIVE SMART & ELITE DRIVER INSTALLATION FOR WINDOWS98/

WINDOWS98 SE

3.1 Files List

- TD2SM_G6.inf

- TD2SM_G6.sys

- TD2SM_G6.pdr

+ For Windows 98 & 98SE, install drivers before performing the steps

TEAC Flash Drive Smart & Elite User’s Guide Page 4 of 14

3.2 Procedure for installing Flash Drive Smart & Elite driver and
controller (Windows98 & 98 SE):

When the PC/Notebook has been powered up, insert the CD-ROM labeled
”Flash Drive Smart & Elite Installation Disk” into the CD-ROM drive and
follow the procedures below to install the Flash Drive Smart & Elite drivers
and controllers.

1. Insert your Flash Drive Smart & Elite into your PC/Notebook’s USB

port. Windows will detect that a new hardware has been connected and the
“Add New Hardware Wizard” screen will appear. To install the drivers, click
the “Next” button.