Teac Mini CD-MP3 Player User Manual

User's manual .......................................... Page 2
Guide de l'utilisateur ........................... page 18
Manual de usuario ........................... Pagina 34
EN
F
E
1
EN
1. General
Please note that the TEAC MP3 Player plays Mini CDs only (Mini CDs have a diameter of 8cm, in comparison with the regular CDs which have a diameter of 12cm). We recommend that you use TEAC Mini CD-R discs with your TEAC Mini CD/MP3 Player.
Package Contents
Before using your TEAC MP3 Player, please check the box for the contents:
• TEAC Mini CD/MP3 Player
• One Sennheiser in-ear headphones
• Music Match Jukebox software
• One blank Mini CD-R disc
• AC adapter (120VAC only)
• Two AA alkaline batteries
• User’s manual
• Warranty card
Note: If any of the items above is missing from your kit upon purchase, please contact your vendor immediately for replacement.
2
2. Operating Instructions
Power
The player can be powered either by 2 AA-size alkaline batteries or by the AC adapter.
Inserting Batteries Remove the battery cover on the back of the player
by sliding it in the direction indicated by the arrow on the battery-cover.
Insert 2 AA-size alkaline batteries according to the drawing. Please make sure that the batteries are properly inserted, with + and - side according to the the markings on figure 1.
figure 1
Note: Batteries contain chemical substances, when empty, they should be properly disposed of.
EN
3
EN
Front Panel
1
5
6
2 3
1 Stop/Off () 2 Previous () 3 Play/On/Pause () 4 Next ()
figure 2
5 Equalizer 6 Repeat 7 Intro 8 Program
7
8
4
4
Side Panel
EN
9
10
11
9 Power supply in
10 Headphone in +
Line out
figure 3
12
13
figure 4
14
11 Open player
cover
14 Volume control
12 Hold 13 Bass boost
5
EN
Connecting the AC adapter
Insert the 120VAC AC adapter into the appropriate socket (9 figure 3).
Insert the power plug into the main outlet.
Getting Started
Open the cover by sliding the "Open" switch (11 figure 3).
Insert a MiniCD into the player, with the disc label facing up. Never touch the lens of the player.
Close the cover. Press "Play" (3 figure 2) to turn on the power. The player will start initializing the CD. When initial-
izing, the LCD display shows "READ". If a MP3 CD is inserted, the display will show the total
number of titles and tracks. If a Audio CD is inserted, the display will show the
total tracks and playing time. If no CD is inserted or the disc cannot be initialized,
the LCD display will show "NO DISC". Only when power comes from the batteries, will the
battery-status indicator appear on the display.
battery full battery empty
When the batteries are running low, the battery­indicator will start flashing.
6
Loading...
+ 11 hidden pages