TANDBERG Codec 3000 MXP, Codec 6000 MXP Reference Manual

TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Designe d for custom integrations
19 mountab le codecs
Expan dability f or future ap plications
Total management via serial p ort, embedded we b
server, SNM P, Telnet, XML, HT TP / HT TPS, F TP and on screen menu
Best possible call for ea ch MultiSite p articipant with
rate matching and transcoding
URI dialling
H.323, H.320 & SI P suppor t
TANDBERG E xpressway™ Technology
Protection against net work inter ruptions in point-
to-p oint and multipoint calls with automati c downspee ding and IPL R
Standards- based embe dded encr yption
(AES & DES)
Software version F7.X
D 13887.08 MAY 2008
Codec
MXP
3000 6000
REFERENCE
FOR SYSTEM INTEGRATORS
We rec ommen d that you check out the TANDBE RG web s ite regularly for up dated versions of this manual:
http://ww w.tandberg.com/support/ documentation.php
Thank you for choosing TANDBERG!
The TANDBERG Codec 3000 MXP and Codec 6000 MXP have been designed to provide you with many years of safe, reliable operation.
This section of the User Guides contains an overview of what’s new in this version and the Table of Contents.
Our objective with this Reference User Guide for System Integrators has been to address your goals and needs. Please let us know how well we succeeded!
Finding the Information You Need
3
D 138 87.08 MAY 2008
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
What’s New in This Version?
Finding the Information You Need
There are a nu mber of new and altered instructions av ailable in version F 7.1
Configuration Commands
CallVideoSource: <0/1/5/6>
New in this version. The Call Video Source is the default call video source you would prefer to use in a call.
Conference PeriodicIntra: <0..1000>
New in this version. Use this setting to generate a new intra
frame with a congurable interval. Use this setting with caution
since it in a normal network will decrease the video quality. The
default value is set to 0 which means off. If you congure it to
10 it will send an intra every 10th second.
Conferen ce VideoText: <On/Of f/Auto>
New in this version. In MultiSite calls you can display the names of the participants on screen. By setting the Video Text Time-out
setting, the system is congured to display the names for a
period of time or as long as you are connected.
Conference VideoTextTimeout: <0..30>
New in this version. Sets the timer for the On-screen name of participants in MultiSite calls. Set the timer to display the names for a period of time or as long as you are connected.
CorporateDirectory Protocol: <HTTP/HTTPS>
New in this version. TANDBERG MXP systems now support secure management when communicating with the TMS (TANDBERG Management Suite).
Directory CallLog: <On/Off>
New in this version. Enable/disable Call Logs for Placed calls, Missed calls and Received calls in the Phone Book.
DynamicResolution Mode <Auto/Off>
New in this version. With Dynamic Resolution the system will use the optimal video resolution for the chosen bandwidth. This
feature is only applicable to HD (high denition) calls.
If set to Auto and in a HD call: the resolution will differ between the bandwidths 720p, 576p and 448p, dependent on how much motion it is in the picture. The call will start with 720p and
change to a lower resolution when there is a lot motion. It will go back to 720p with less motion.
If set to Off: Disables the Dynamic Resolution feature (the default setting).
ExternalManager Protocol: <HTTP/HTTPS>
New in this version. Enables/disables for secure management.
ExternalServices Protocol: <HTTP/HTTPS>
New in this version. Enables/disables for secure management.
HTTPS VerifyServerCerticate: <On/Off>
New in this version. TANDBERG MXP systems now support secure management when communicating with the TMS.
For more information see the TANDBERG White Paper “Imple-
menting Secure Management” which describes how to congure secure HTTPS between TANDBERG products. To nd the docu-
ment, follow the link: http://www.tandberg.com/support/docu­mentation.php and select White Papers.
Kiosk OneClickConnect: <On/Off>
New in this version. If turned On, you can make a call with a single click on the green call button on the remote control. The
system will call the rst entry in “My Contacts” in the Phone
Book. NOTE: This functionality will only work in Kiosk Mode
If set to Off: Does not allow for one click connect in Kiosk mode.
MaxBandwidth: <128..10240>
New in this version. Limit max bandwidth usage for the system. Related to IPMedia MaxVideoTXRate, which only controls up­stream bandwidth.
OSD CallDuration Mode: <On/Off>
New in this version. The call duration can be displayed on screen. The timer showing the duration of the call is displayed in the bottom right corner of the screen.
OSD Menu IconPlacement: <Left/Right>
New in this version. Applies to the following icon indicators: Microphone Off, Volume Off, On Air, Encryption, Bad Network, Telephone, Duo Video and Camera Tracking. Places the icons in the top left corner or the top right corner of the screen.
OSD Menu Language: < English/German/Norwegian/French/
Swedish/Danish/Italian/Portuguese/Japanese/Chinese/Tradi­tionalChinese/Russian/Spanish/Korean/Finnish/Thai/Arabic>
Altered in this version. Added Danish menu language to the list.
SerialPort 1 Mode: <Control/Transparent/Direct>
Altered in this version. Control: Gives access to the Command Line Interface. Transparent: Enables transmission of text during call on a line by line basis. Direct: Enables transmission on binary data during call. NOTE! Only Serial Port 1.
SerialPort 1 Direct Buffer: <0..16384>
New in this version. Species the size of the buffer used in di- rect mode. Try setting this value higher if you need a continuous stream of data on the receiving end. Higher values introduces more delay. NOTE! Only Serial Port 1.
SIP ReplyTo URI: <S: 0, 60>
New in this version. If congured it is this URI that will be dis- played in the call lists.
SIP Server Type: <S: 0, 60>
Altered in this version. Added Siemens to the list of SIP server type. Must be used when registering to a Siemens HiPath 8000.
Video Inputs Source 5 HorizAdjust: <0..255>
New in this version. This gives you the possibility to adjust the placement of the pc image on screen. Much like the setting you
nd on a regular pc screen. NOTE! Only Video Input Source 5.
Video Outputs Animation <On/Off>
New in this version. The new PiP/PoP animation makes the windows fade or slide into position when changing the picture layout. PiP means Picture in Picture layout and PoP means Pic­ture outside Picture layout.
Conguration commands for TANDBERG Remote Control
Enable or disable keys, and using conguration instead of com­mands.
Key Number0: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
4
D 138 87.08 MAY 2008
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
What’s New in This Version?
Finding the Information You Need
Key Number1: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Number2: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Number3: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Number4: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Number5: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Number6: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Number7: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Number8: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Number9: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Star: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Square: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Connect: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Disconnect: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Up: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Down: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Right: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Left: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Selfview: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Layout: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Phonebook: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Cancel: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key MicOff: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Presentation: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key VolumeUp: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key VolumeDown: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Ok: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key ZoomIn: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key ZoomOut: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control.
Key Grab: <On/Off>
New in this version. Enables/disables the signal which is sent to the codec when grabbing the TANDBERG Remote Control.
Key Cabinet: <On/Off>
New in this version. Enables/disables the headset key in front of the cabinet. Applies to TANDBERG 1000 MXP only.
Key Presets: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control (TRC4).
Key FarEnd: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control (TRC4).
Key Services: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control (TRC4).
5
D 138 87.08 MAY 2008
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Key Help: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control (TRC4).
Key MainCam: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control (TRC4).
Key PC: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control (TRC4).
Key DocCam: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control (TRC4).
Key VCR: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control (TRC4).
Key AUX: <On/Off>
New in this version. Enables/disables the given key on the TANDBERG Remote Control (TRC4).
Command Instructions
Obser ve that the (r) in the Command instructions denotes tha t the parameter is required. The (r) appear s for your infor mation only and is not a p art of the i nstruction.
There are no n ew xComman d instructions for this version.
Status Information Commands
There are no n ew xStatus in structi ons for this ver sion.
What’s New in This Version?
Finding the Information You Need
D 138 87.08 MAY 2008
6
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Finding the Information You Need
What’s New in This Version? ............................................... 3
Configur ation Comm ands .............................................. 3
Command Instructi ons ..................................................5
Status Information C ommands ...................................... 5
Intellectual Property Rights
Disclaimer
License Information and Patent Information
License A greemen ts ....................................................11
Patent Information ...................................................... 11
Operator Safety / Environmental Issues
Safety In structi ons ...........................................................1 3
Water and Moisture ..................................................... 13
Cleaning .....................................................................13
Ventilation .................................................................. 13
Lightning .....................................................................13
Dust ........................................................................... 13
Vibration ..................................................................... 13
Power Conne ction and Ha zardous Vo lta ge .................... 13
Servicing .................................................................... 13
Accessories ................................................................ 13
Communic ation Lines ..................................................13
Environme ntal Issues ....................................................... 14
TANDBERG’s Environmental Polic y ............................... 14
European Environment al Directives .............................. 14
Waste Handlin g .......................................................... 14
Informat ion for Recyc lers ............................................. 14
Digital Us er Guides .................................................... 14
China RoHS Table........................................................ 15
What’s in the Shipping Box?
Contents of t he 3000 MXP Codec Shipping Box ................. 17
Contents of t he 6000 MXP Codec Shipping Box .................18
Interfaces and Sockets – Codec 3000 MXP
Rear Panel So cket– and Interface G roups .........................20
Codec 30 00 M X P .................................................................... 20
Codec 30 00 M X P Net .................................................. 20
Audio Sockets.................................................................. 21
Audio signal levels in Vpp and dB u .................................... 22
Video Sockets ................................................................. 23
Camera So cket ................................................................ 24
ISDN BRI so ckets ............................................................ 25
Net socket ....................................................................... 26
Networ k Interface Sockets ...............................................27
Power Socket & On/Off Switc h ......................................... 28
Interfaces and Sockets – Codec 6000 MXP
Rear Panel So cket– and Interface G roups .........................3 0
Audio Sockets.................................................................. 31
Audio Sign al Levels in Vpp and dBu................................... 32
Video Sockets ................................................................. 33
Net Inter face Soc ket ........................................................ 34
Networ k Interface Sockets ...............................................35
Camera So ckets ..............................................................36
Data Por ts ....................................................................... 37
Power Socket & On/Off Switc h .........................................3 8
About the TANDBERG API
Introduction ..................................................................... 40
Basic Princ iples .......................................................... 40
The TANDBERG A PI Engine ........................................... 40
Structuring of Info rmation ............................................ 40
Addressing Using XPat h or TANDBERG SimplePath ....... 40
Feedback .................................................................... 40
Datapor t Inter face on the Classic Systems ................... 41
XACLI .............................................................................. 42
Accessin g XACLI ......................................................... 42
Connect ing to XACL I using the Datapor t (RS 232) ......... 42
Hardware & Cabling (RS 232) ....................................... 42
Troubleshooti ng (RS 232) ............................................. 42
Data Por t (RS 232) ...................................................... 42
Cable wiring TANDBERG MX PPC via RS 232 ............. 42
XACLI – the Basics ........................................................... 43
Root Commands .........................................................43
XACLI – Main Types of Commands ....................................44
Special Co mmands .....................................................4 4
Configur ation Type Com mands ..................................... 44
Status Type Commands ............................................... 44
Command Type C ommands ......................................... 44
XACLI – Configuration Type Commands .............................45
XACLI – Configuration Type Oper ation .............................. 46
Configur ation Help ...................................................... 46
Configur ation Read ...................................................... 46
Configur ation Set ( Write) ............................................. 46
XACLI – Configuration Types ............................................. 47
Format fo r Value Types ................................................47
XACLI – Command-type – xc ommands/xdire ctory ............... 48
Gettin g an Overview ....................................................48
What’s in this
User Guide?
D 138 87.08 MAY 2008
7
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Command help ............................................................4 8
How to Get an Overview of Suppor ted Comman ds .........48
XACLI – Command-type – Issuing a Command ................... 49
Issuing a Com mand ..................................................... 49
Sequenc e Notation ..................................................... 49
Command Re sponse ...................................................49
Combination of Markup N otation and Sequence ...........49
XACLI – Command-type – P arameter Value Types .............. 50
Command Parameter Value Typ es ................................ 50
Format fo r Value Types ................................................50
XACLI – S tatus Type Commands .......................................51
Underst anding St atus Inform ation Str ucturing .............. 51
XACLI – S tatus Type – Def ault Formatting .......................... 52
Default X ACLI For matting ............................................. 52
About th e Example s Provided ...................................... 52
XACLI – S tatus Type – Comp lete Path Formattin g............... 53
XACLI – S tatus Type – XML F ormatt ing .............................. 54
XACLI – S tatus Type – Addressing St atus Inform ation ........ 55
XACLI – S tatus Type – Ex posure Options ...........................56
XACLI – Sp ecial Comm ands – xfee dback ........................... 57
XACLI – Sp ecial Comm ands – xpref erences ....................... 59
The xpref erences Op tions ............................................ 59
xprefere nces xpat hwrite .............................................. 59
xprefere nces xmlco mmandresult ................................. 59
xprefere nces detaillevel ............................................... 59
xprefere nces xmlco nfigfeedback .................................. 59
xprefere nces xmlst atusfeedback ................................. 60
xprefere nces itemnu mber ............................................ 60
xprefere nces compl etepath ......................................... 61
XACLI – Sp ecial Comm ands – xget xml ............................... 62
TXA S - TANDBERG XML A PI Serv ice ................................... 63
Bare- bone HT TP(S) Access ..........................................63
Configuration- type Commands
Underst anding the Table L ayout ........................................ 65
AdditionalCamera ........................................................66
AlertSpeaker ............................................................... 66
AlertTone .................................................................... 66
AllowLatency ............................................................... 66
AutoAnswer ................................................................. 70
AutoDisplaySnapshot .................................................. 70
AutoLayout..................................................................70
AutoPIP ....................................................................... 70
Bonding ...................................................................... 70
CallManager ............................................................... 70
CallVideoSource .......................................................... 71
Camera ...................................................................... 71
CameraDVI ................................................................. 72
CameraSleep .............................................................. 72
CameraTracking ..........................................................73
Conference ................................................................. 73
CorporateDirectory ...................................................... 77
DefaultPIPPosition ...................................................... 77
Directory ..................................................................... 78
DoNotDisturb .............................................................. 78
DualMonitor ................................................................ 78
DuoVideoSource ......................................................... 78
DynamicResolution ..................................................... 78
E1 .............................................................................. 78
Ethernet .....................................................................78
ExternalManager ......................................................... 78
ExternalNet work .......................................................... 79
ExternalSer vices ......................................................... 79
FECC .......................................................................... 80
FeedbackFilter ............................................................80
FTP ............................................................................. 80
G703 ..........................................................................80
H320 .......................................................................... 81
H323 .......................................................................... 81
H323CallSetup ........................................................... 81
H323Gatekeeper......................................................... 81
H323Prefix .................................................................83
HTTP ..........................................................................83
HTTPS ........................................................................83
IdReport ..................................................................... 83
IEEE802.1x ................................................................. 84
IMUX ..........................................................................84
Integrator .................................................................... 89
IP ............................................................................... 89
IPMedia ...................................................................... 90
IPProtocol ...................................................................90
IRControl ....................................................................90
ISDN ........................................................................... 90
Keyboard .................................................................... 94
Kiosk .......................................................................... 94
Key ............................................................................. 94
Kiosk .......................................................................... 98
LocalLayout ..............................................................100
Logo ......................................................................... 100
LoS ..........................................................................10 0
MainVideoSource ...................................................... 101
MaxBandwidth .......................................................... 101
MCU ......................................................................... 101
NAT .......................................................................... 101
NetProfile ................................................................. 101
NTP .......................................................................... 102
OptionKey ................................................................. 102
OSD ......................................................................... 102
PictureProgram ......................................................... 105
PresentationStart ...................................................... 105
PacketlossDownSpeed .............................................. 105
Preset ......................................................................10 6
QoS .......................................................................... 108
RemoteSwUpgrade .................................................... 110
RTP ..........................................................................110
Screensaver .............................................................. 110
SelfView OnStartup ....................................................110
SerialPort ................................................................. 110
SIP ........................................................................... 111
SNMP ....................................................................... 112
StartupVideoSource .................................................. 113
StillImageSource ....................................................... 113
SSH .......................................................................... 113
Streaming ................................................................. 114
Strict Password: <O n/Off> ......................................... 115
Switch ...................................................................... 115
SystemUnit ............................................................... 115
T1 ............................................................................ 116
Telnet ....................................................................... 116
TelnetChallenge ........................................................ 116
Time ......................................................................... 116
UseAsLocalPCM onitor ...............................................117
Video ........................................................................ 117
VNC .......................................................................... 121
LocalEnt ry — GroupEntr y ................................................. 122
LocalEnt ry [1..200] ....................................................122
GroupEntry [1..50] .....................................................122
GlobalEntry .................................................................... 123
Configuration Storage Levels
Underst anding the Table L ayout ...................................... 125
HTTP M ode — IPProtocol ................................................. 131
Video Inputs Source [1..6] Name — VNC Passwor d .........139
Command Information Tables
Underst anding the Table L ayout ...................................... 141
AlertToneTest ............................................................142
AudioTestSignal ......................................................... 142
Boot ......................................................................... 143
CallAccept ................................................................143
CallMute ................................................................... 143
CallMuteOutgoing ...................................................... 143
CallSetAudioTP .......................................................... 144
CameraFocus ............................................................ 144
CameraForceUpgrade ................................................ 144
D 138 87.08 MAY 2008
8
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
CameraHalt ..............................................................144
CameraMove.............................................................14 5
CameraPosition ........................................................145
CameraReconfigure ................................................... 145
CameraTrackingStart ................................................. 146
CameraTrackingStop .................................................146
CameraUpgrade ........................................................ 146
CameraWhiteBalance ................................................ 146
ChairRelease ............................................................14 6
ChairTake .................................................................. 146
ConferenceDisconnect .............................................. 147
ConferenceTerminate.................................................147
CorpDirSearch .......................................................... 148
CorpDirGetNext ......................................................... 149
CorpDirGetPrevious ................................................... 150
DefaultValuesSet ......................................................151
Dial ..........................................................................152
DialGlobalEntry .........................................................153
DialGroupEntry .......................................................... 153
DialLocalEntr y ........................................................... 153
DisconnectCall .......................................................... 154
DuoVideoStart ..........................................................154
DuoVideoStop ........................................................... 154
DTMFSe nd ................................................................ 154
FECCF ocus ............................................................... 154
FECCM ove ................................................................155
FECCPresetActivate ................................................... 155
FECCPresetStore ....................................................... 155
FECCRequestStill ...................................................... 155
FECCSelectSource .................................................... 155
FeedbackDeregister ..................................................155
FeedbackRegister .....................................................156
FIPSMode ................................................................. 156
FloorRelease ............................................................. 156
FloorRequest ............................................................156
FloorToSite ................................................................ 157
FloorToSiteEnd .......................................................... 157
GroupEntr yAdd .......................................................... 157
GroupEntry Delete ...................................................... 157
KeyDown .................................................................. 157
KeyRelease ...............................................................158
KeyPress ..................................................................158
KeyDisable ............................................................... 158
KeyEnable ................................................................. 158
LocalEntryAdd ........................................................... 159
LocalEntryD elete ....................................................... 159
MessageBoxDelete ................................................... 159
MessageBoxDisplay .................................................. 160
PIPHide ..................................................................... 160
PIPShow ...................................................................16 0
PresetActivate ..........................................................16 0
PresetClear ............................................................... 161
PresetStore ..............................................................161
ProfileActivate ........................................................... 161
ProfileCreate ............................................................. 161
ProfileDelete ............................................................. 161
ProfileList ................................................................. 161
ScreensaverActivate .................................................. 161
ScreensaverDeactivate .............................................. 162
ScreensaverReset ..................................................... 162
SiteDisconnect .........................................................162
SiteView ...................................................................162
SiteViewEnd .............................................................. 162
SPIDAutoConfigure .................................................... 163
StillImageSend .......................................................... 163
StreamingStart ......................................................... 163
StreamingStop .......................................................... 163
TextDelete ................................................................163
TextDisplay ...............................................................163
VirtualMonitorReset ..................................................16 4
VirtualMonitorSet ...................................................... 164
Status Information Tables
Underst anding the Table L ayout ...................................... 166
Audio............................................................................. 167
BRI ................................................................................ 168
Call ............................................................................... 170
Camera ......................................................................... 182
CameraSWUpgrade ........................................................18 3
CameraTracking ............................................................. 184
Conference .................................................................... 185
Ethernet ........................................................................ 191
ExternalManager ............................................................ 192
ExternalNet work ............................................................193
FarEndInformatio n ........................................................19 4
Feedback ....................................................................19 6
G703 ............................................................................. 197
H323Gatekeeper ...........................................................198
IP .................................................................................. 199
NTP ............................................................................... 200
PRI ................................................................................ 201
RemoteSwUpgrade ........................................................ 204
Screensaver .................................................................. 205
SIP .............................................................................. 206
SoftwareUpgrade ........................................................... 207
Switch ..........................................................................208
SystemUni t ... ................................................. 210
VirtualMonitor ................................................................ 211
Warning ......................................................................... 212
Call ...............................................................................213
Call - DisconnectCause ..................................................214
Call - DisconnectCauseValues ........................................ 215
AuthenticationFailure .....................................................218
CallDisconnected ........................................................... 219
CallSuccessful ............................................................... 220
DownspeedingF inished .................................................. 221
MessageBoxResult ........................................................222
PacketlossDownSpeed ................................................... 223
SString .......................................................................... 224
SystemActivity ...............................................................225
Controlling External Cameras
Extc am Protocol B asics .................................................. 227
Far End Video Source Sw itching .................................227
Far End Pres et Switching ........................................... 227
The extcap and the ext name ...................................... 227
The extsw itch ............................................................ 227
Interf acing to the TAND BERG WAVE II Came ra ................228
Command an d Response E xchange Se quence ............ 228
Connect ing to the Camera .........................................231
Interf acing to the Precision HD Camera ........................... 231
New Commands and Inquir ies .................................... 231
TANDBERG Video Switch
Unpackin g the Video S witch ........................................... 233
The TANDBERG V ideo Switc h set contains: ................. 233
Cameras ................................................................... 233
Connect ing the Video Switch ..........................................234
Installation of the Video Switch ...................................... 237
Communic ating with t he Video Switch ............................. 238
Communic ating Using VI SCA ...................................... 238
VISCA Inter face Basics .............................................. 238
VISCA Serial Ports ..................................................... 238
Enhanced VISCA ....................................................... 238
VISCA Mess ages ....................................................... 238
VISCA Standard Commands ....................................... 238
VISCA Standard Inqu iries ........................................... 238
VISCA Standard Push M essages ................................ 238
Configur ation Comm ands ..........................................239
Switch control comma nds .......................................... 239
Disclaimer and Safety I nstruct ions ................................. 240
Product D eclaration ....................................................... 241
We rec ommen d that you check out the TANDBE RG web s ite regularly for up dated versions of this manual:
http://ww w.tandberg.com/support/ documentation.php
This Reference Guide for System Integrators and the Products to which it relates contain information that is proprietary to TANDBERG and its licensors. Information regarding the Products is found on the page entitled License Agreements and Patent Information.
This Reference Guide for System Integrators may be reproduced in its entirety, including all copyright and intellectual proper ty notices, in limi ted quant iti es in c onn ection wit h th e us e of the Pr odu cts. Exc ept for the limited exception set forth in the previous sentence, no part of this Reference Guide for System Integrators may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, electronically, mechanically, by photocopying, or other wise, without the prior written permission of TANDBERG. Requests for such permission should be addressed to tandberg@tandberg.com.
TANDBERG® is a registered trademark belonging to Tandberg ASA. Other trademarks used in this document are the property of their respective holders.
COPYRIGHT © 2008, TANDBERG
All rights reserved.
Philip Pedersens vei 22, 1366 Lysaker, Norway
Tel: +47 67 125 125 Fax: +47 67 125 234
E-mail: tandberg@tandberg.com
Intellectual Property Rights
We rec ommen d that you check out the TANDBE RG web s ite regularly for up dated versions of this manual:
http://ww w.tandberg.com/support/ documentation.php
The specifications for the Products and the information in this document are subject to change at any time, without notice, by TANDBERG.
Every effort has been made to supply complete and accurate information in this Reference Guide for System Integrators, however, TANDBERG assumes no responsibility or liability for any errors or inaccuracies that may appear in this document.
INTELLECTUAL PROPERTY RIGHTS
The Products that are covered by this Reference Guide for System Integrators are protected under copyright, patent, and other intellectual property rights of various jurisdictions. Any applicable software licenses and any limited warranty are located in the License Information section in this System Integrator Reference Guide.
This Product is
COPYRIGHT © 2008, TANDBERG
All rights reserved.
Disclaimer
D 138 87.08 MAY 2008
11
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
License Agreements
Copyrig ht notices for third- part y soft ware on the TAND BERG MXP syste ms are listed bel ow:
The non-commercial third p arty c ode is distri buted in binary •
form unde r the terms of no n-c opyleft style open source licenses su ch as BSD, Artistic, or MIT/X Consortium.
The produ ct also cont ains some binary code distribute d in •
binary form under the terms of the G NU public license with an exemption w hich allows static links to non -cop yleft co m­mercial co de.
In accord ance with section (3) of the GN U General P ublic •
License, copies of such code will be provided upon re quest by contac ting TANDBERG . Please cont act us by using t he Online Supp ort sec tion at ww w.tandber g.com or the “con­tact us” sec tion of this manual. Please prov ide USD 10.00 for media and shipping.
Agfa
Contains i Type™ from Mono type Ima ging Corp oration .
CMU-SNMP
Copyri ght © 1988, 19 89, 1991, 1992 by Car negie Mell on Univer­sity All Ri ghts Reser ved
CMU- SNMP is dis tributed u nder the te rms of the CMU S NMP license wh ich is an open s ource lice nse similar to a BS D or X Consor tium Lice nse.
Dropbear - an SSH2 server
Copyri ght © 2002,2 003 Matt J ohnston All r ights res erved.
The Drop bear SSH2 se rver is dis tribute d under the te rms of the Dropbe ar License w hich is a MIT/X Conso rtium st yle ope n source license.
eCos
eCos, the E mbedded C onfigur able Oper ating Sys tem.
Portio ns of eCos cod e are distri buted und er several B SD style licenses. O ther por tions of e Cos code ar e distribu ted under th e terms of the G NU Gener al Public Li cense with a n on- copylef t excep ­tion which a llows staic li nks to non- copyl eft prog rams. Por tions of the code a re distrib uted under t he terms of v arious BSD s tyle
licenses.
Copyri ght © 1998, 199 9, 2000, 2001, 20 02, 2003 Red H at, Inc.
Copyri ght © 2002, 20 03 John Dalla way
Copyri ght © 2002, 20 03 Nick Gar nett
Copyri ght © 2002, 20 03 Jonath an Larmou r
Copyri ght © 2002, 20 03 Andrew Lu nn
Copyri ght © 2002, 20 03 Gary T homas
Copyri ght 9 2002, 20 03 Bart Vee r
Copyri ght © 1982, 1986, 1 991, 1993 The Re gents of the Universi ty of Califo rnia. All rig hts reser ved.
Copyri ght © UNIX Sy stem Labo ratories, I nc.
All or some p ortion s of this file ar e derived f rom materi al licensed to the Unive rsity of Ca lifornia by A merican Telep hone and Telegr aph Co. or Unix Sys tem Labor atories, I nc. and are rep roduce d herein with the p ermission o f UNIX Syst em Labor atories, In c.
Copyri ght © 1995, 1996, 1 997, and 1998 WIDE Projec t. All righ ts reserved.
Copyri ght © 2000 B rian Somer s <brian@Aw fulhak.o rg>
Copyri ght © 1998 The N etBSD Fo undation, I nc. All righ ts reser ved.
Copyri ght © 1997 Niklas Ha llqvist. A ll rights re served .
Copyri ght © 1988 St ephen Dee ring.
Copyri ght © 1992, 1993 T he Regents of t he Univers ity of Californ ia. All right s reser ved.
This code is d erived fr om soft ware cont ributed to B erkeley by Stephen D eering of S tanford U niversit y.
ExPat XML Parser
Copyri ght © 1998, 199 9, 2000 Thai O pen Sourc e Soft ware Cente r Ltd and Clar k Cooper
Copyri ght © 2001, 200 2, 2003, 200 4, 2005, 200 6 Expat m ain­tainers.
The Ex Pat XML par ser is distri buted und er the terms o f the ExP at License w hich is a MIT/X Conso rtium st yle ope n source lic ense
ICU
ICU Licen se - ICU 1.8.1 Co pyright © 1 995-20 03 Intern ational Busi ­ness Mach ines Corp oration an d others. All r ights res erved.
ICU is distr ibuted und er the term s of the ICU lic ense which is a MIT/X Consor tium sty le license.
OpenSSL
Copyri ght © 1998 -2004 The O penSSL Pr oject. All r ights res erved.
This prod uct includ es soft ware develo ped by the Op enSSL Pro ject for use in the O penSSL Toolki t (http://www.openssl.o rg/)”
Copyri ght © 1995 -1998 Eric Young (eay @cryp tsoft. com) * All rights re serve d.
OpenSS L is distribu ted under th e terms of th e OpenSSL an d SS­Leay licens es which are b oth BSD st yle open so urce licen ses.
snprintf
Copyri ght © 1999, Mark M artin ec. All righ ts reser ved
Snprint f is distrib uted under t he terms of t he snprint f license w hich is a Frontier A rtist ic style o pen sourc e license.
xSupplic ant (wpa_ supplica nt) 802.1x
Copyri ght © 2002-20 05, Jouni Ma linen jkmalin e@cc.hu t.fi
xSupplic ant is distri buted und er the terms o f the xSuppli cant license wh ich is a BSD st yle open so urce licen se.
Patent Information
The prod ucts desc ribed in thi s manual are co vered by one or m ore of the follow ing patent s:
US6,584,077 US5,83 8,664 US5,600,64 6
US5,768,263 US5,991,277 US7,034,860
US5.886 .734 US5990.933 US7,010,119
US7,283,588 EP01953201 GB1338127
Other pa tents pen ding.
View ww w.tandberg.com/tandberg_pm.jsp for a n updated lis t
License Information and Patent Information
We rec ommen d that you check out the TANDBE RG web s ite regularly for up dated versions of this manual:
http://ww w.tandberg.com/support/ documentation.php
For your own protection, please read the overleaf safety instructions completely, before operating the equipment and keep this manual for future reference. The information in this summary is intended for operators. Carefully observe all warnings, precautions and instructions both on the apparatus and in the operating instructions.
Operator Safety / Environmental Issues
D 138 87.08 MAY 2008
13
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
For your protection pl ease read the se safety instruc tions compl etely before y ou connect the equipm ent to the power source. Car efully observe all warnings, p recautio ns and instruc­tions both on the appara tus and in thes e operating instruc tions.
Retain this ma nual for futu re referenc e.
Water and Moisture
Do not oper ate the appa ratus under or • near water – fo r example near a b athtub, kitchen sin k, or laundr y tub, in a wet base ­ment, near a swimming pool o r in other areas with hi gh humidit y.
Never install jacks for com municatio n • cables in wet l ocations un less the jack is specifically desig ned for wet lo cations.
Do not touch t he produc t with wet han ds.•
Cleaning
Unplug the apparatus f rom communi cation • lines, mains po wer-out let or any power source before cleanin g or polishing. D o not use liquid cle aners or aerosol cleaner s. Use a lint-fr ee cloth ligh tly moistene d with water for cleaning the exterior of the ap ­paratus.
Unplug the apparatus f rom communi cation • lines before cleaning or polishing. Do not use liquid cle aners or aerosol cleaner s. Use a lint-fr ee cloth ligh tly moistene d with water for cleaning the exterior of the ap ­paratus.
Ventilation
Do not block a ny of the ventilation open -• ings of the app aratus. Never cover the slots and openings with a cloth or other material. Never install th e apparatus n ear heat sourc es such as radiators, heat regis­ters, stoves, or other appar atus (including amplifie rs) that produ ce heat.
Do not plac e the produ ct in direct su nlight •
or close to a sur face directly heated by the sun.
Lightning
Never use this a pparatus, o r connect /discon­nect comm unication c ables or power cables during lig htning stor ms.
Dust
Do not oper ate the appa ratus in areas w ith high concentration of dust
Vibration
Do not oper ate the appa ratus in areas w ith vibratio n or place it on an unstable surface.
Power Connection and Hazardous Voltage
The produ ct may have hazardous vol tage •
inside. Never a ttempt to op en this product, or any perip herals conn ected to the prod­uct, where this action requires a tool.
This produ ct should alw ays be powere d •
from an ear thed pow er outlet.
Never conn ect atta ched power s upply cord •
to other pro ducts.
In case any parts of the p roduct has visual •
damage neve r attempt to c onnect mains power, or any other p ower sourc e, before consultin g service personn el
The plug co nnecting t he power cor d to the •
product/power supply s erves as the main disconnect device fo r this equipme nt. The power cord m ust always be easily acces ­sible.
Route the power cord so as to avoid it be-•
ing walked on or p inched by items placed upon or against it. Pay par ticular at tention to the plugs, re ceptacl es and the point where the c ord exits from the appar atus.
Do not tug the power cord.• If the provided plug do es not fit into your •
outlet, consult an elect rician.
Never install cables, or any p eripher als, •
without f irst unplu gging the device fr om it's power sour ce.
Always use the power supp ly (AC–D C adap-•
tor) provid ed with this product (adaptor is supplied wi th 3000 MXP only).
Replace only with power supply (AC– DC •
adaptor) specified by TAND BERG (adaptor is supplied wi th 3000 MXP only).
Never conn ect atta ched power s upply •
(AC–D C adaptor) to ot her products (adaptor is supplied wi th 3000 MXP only).
Servicing
Do not atte mpt to ser vice the app aratus •
yourself as opening or rem oving cover s may expose yo u to dangerous voltages or
other hazards, and will void the warranty.
Refer all ser vicing to qu alified service personn el.
Unplug the apparatus f rom its powe r •
source and refer ser vicing to qualified personn el under the following conditions:
If the power c ord or plug is damaged or •
frayed.
If liquid has be en spilled into t he •
apparatus.
If object s have fallen into the appar atus. • If the apparatus has bee n exposed to •
rain or moisture
If the apparatus has bee n subjected to •
excessive sh ock by being dr opped.
If the cabin et has been damaged.• If the apparatus seems to b e •
overheate d.
If the apparatus emits smoke or •
abnormal odor.
If the apparatus fails to op erate •
in accord ance with the operati ng instructions.
Accessories
Use only acc essories sp ecified b y the manufac turer, or sold with t he apparatus.
Communication Lines
Do not use com municatio n equipment to repor t a gas leak in the vicinity of t he leak.
Safety Instructions
D 138 87.08 MAY 2008
14
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Thank you for buying a pro duct whic h contribu tes to a reduc ­tion in pollu tion, and thereby helps save t he environm ent. Our products reduce the need for tr avel and transport and thereby reduce pollution. Our p roducts have either no ne or few consum ­able par ts (chemicals, toner, gas, paper). Our p roducts a re low energ y consuming products.
TANDBERG’s Environmental Policy
Environme ntal stewardship is impor tant to TANDB ERG’s culture. As a gl obal company with stron g corpor ate values, TANDBERG is com mitted to following inter national env ironmen ­tal legisla tion and designing techn ologies that help companies, individu als and communities creat ively addre ss environm ental challenges.
TANDBERG’s environmental objectives are to:
Develop pro ducts that reduce en ergy consumption, CO•
2
emissions, and traff ic congest ion
Provide pr oducts an d servi ces that improve qualit y of life for •
our custome rs
Produce p roducts t hat can be re cycled or disp osed of safel y •
at the end of product life
Comply with all relevant e nvironmental legislat ion.•
European Environmental Directives
As a manufa cturer of electrical an d electronic equipmen t TAND­BERG is responsible for compliance with the requirements in the European Directives 2002/96/EC (WEEE) and 2002/95/EC (RoHS).
The prima ry aim of the WEEE Direct ive and RoHS Dir ective is to reduce t he impact of disposal of elec trical and electroni c equipment at end- of-life. T he WEEE Direc tive aims to reduce the amount of WEEE sent for dis posal to land fill or incin eration by requirin g produce rs to arran ge for collect ion and recy cling. The RoHS Directive bans t he use of cer tain heav y metals an d brominate d flame ret ardants to re duce the env ironment al impact of WEEE which is land filled or in cinerated.
TANDBERG has implemented necessar y proces s changes to comply with the European RoHS Direc tive (2002/95/EC) and the Europe an WEEE Direc tive (2002/96/EC).
Waste Handling
In order to avoid the dissemination of haz ardous subs tances
in our environment and to dimi nish the pressure on natur al resource s, we encourage you to use the appropria te take- back systems in you r area. Those sy stems will reuse or recycle most of the materials of your end of li fe equipmen t in a sound way.
TANDBERG pro ducts put on the market a fter Augus t 2005 are marked with a crossed- out wheelie bin sym­bol that invites you to use those take- back systems.
Please cont act your local supplier, the re gional waste
administr ation or http://www.tandberg.com/recycling if you need mo re information on the collection and recycling system in your a rea.
Information for Recyclers
As part o f complianc e with the European WEEE Directive, TAND ­BERG provi des recycli ng information on reque st for all typ es of new equipme nt put on the m arket in Europ e after August 13th
2005.
Please cont act TANDBERG and provide the following details for the pro duct for whi ch you would like to r eceive rec ycling information:
Model number of TANDBERG p roduct • Your company’s name • Contact name • Address • Telephone numb er • E-mail. •
Digital User Guides
TANDBERG is ple ased to announ ce that we have replaced t he printed versions of our Use r Guides wit h a digital CD ve rsion. Instead of a range of diff erent user manuals, there is now one CD – which can b e used with all TANDBERG prod ucts – in a variety o f languages. The environmental benef its of this are significant. The CDs are recycla ble and the savings on pape r are huge. A simpl e web- based search feature helps you direct ly access th e information you need. In a ddition, th e TANDBERG video systems now have an intu itive on-screen h elp functio n, which prov ides a range of useful features and tips. Th e con­tents of the CD can still be pr inted locall y, whenever need ed.
Environmental Issues
D 138 87.08 MAY 2008
15
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
China RoHS Table
Environmental Issues
We rec ommen d that you check out the TANDBE RG web s ite regularly for up dated versions of this manual:
http://ww w.tandberg.com/support/ documentation.php
What’s in the Shipping Box?
This part of the Reference Guide for System Integrators presents the contents of the shipping box to ease your acceptance test as well as assist you in making sure you’ve got everything with you if you need to take the codec along for installation etc.
17
D 138 87.08 MAY 2008
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Remote control
Batteries for remote control
CD with user documentation
Rack mounting kit (I)
Rack mounting kit (II)
Codec 3000 MXP
User
registration
card
Power supply
Up to 4 mains cables (depending on region)
4 ISDN BRI cables
(not included with the
NET version)
Video DVI–VGA cable
Split cable for non-TANDBERG WAVE II cameras
1 LAN / Ethernet cable
What’s in the Shipping Box?
Contents of the 3000 MXP Codec Shipping Box
18
D 138 87.08 MAY 2008
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
What’s in the Shipping Box?
Contents of the 6000 MXP Codec Shipping Box
Remote control
Batteries for remote control
CD with user documentation
Rack mounting kit (I)
Rack mounting kit (II)
Codec 6000 MXP
User
registration
card
6 ISDN BRI cables
1 ISDN PRI cable
1 LAN / Ethernet cable
DVI–VGA cable
Up to 4 mains cables (depending on region)
Mains
extension
cable
We rec ommen d that you check out the TANDBE RG web s ite regularly for up dated versions of this manual:
http://ww w.tandberg.com/support/ documentation.php
Interfaces and Sockets – Codec 3000 MXP
This part of the manual provides an in-depth presentation of the rear panel sockets and interfaces of the Codec 3000 MXP, including the audio signal levels and the formats supported.
20
Interfaces and Sockets – Codec 3000 MXP
D 138 87.08 MAY 2008
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Audio sockets
Video sockets
DC power socket
and On/Off switch
Network interface
sockets
PC card
Camera
ISDN BRI
Net socket
Camera
Audio sockets
Video sockets
DC power socket
and On/Off switch
Network
interface
sockets
PC card
Codec 3000 M X P
Codec 3000 M X P Net
The Codec 3000 MXP comes in two avours – with ISDN BRI sockets (upper) or with Net socket (lower).
Ethernet
Ethernet
Rear Panel Socket– and Interface Groups
21
Interfaces and Sockets – Codec 3000 MXP
D 138 87.08 MAY 2008
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Microphone Inputs Nos. 1–2.
Two balanced microphone inputs for electret microphones
balanced, 24V phantom
powered via XLR connectors.
Use Audio Input No. 3 to connect to external playback devices. This input can also
be congured as a microphone
input. It will then function in lieu of the Mic. 2 input and be
connected to Mic. 2’s echo canceller (which can be turned on/off).
Use Audio Input No. 4 to connect a VCR or DVD player to the system. For systems
congured with stereo I/O,
connect the VCR/DVD right channel to this input. This input should be used when connecting a telephone add-on system.
Tip! Audio Input No. 4 is not
equipped with an acoustic echo canceller. Connecting a microphone to this input can therefore not be recommended.
Use Audio Output No. 2 (the VCR out put) to provide a mi xed signal consisting of audi o from the lo cal side (VC R not include d) and audio from t he far end.
This outpu t should be use d when connecting a telephone a dd- on system.
For system c ongured wi th stereo I/O and
with SPDI F† active on Audio Outpu t No. 1, this output will provide th e VCR left ch annel stereo informat ion.
For systems c ongured wi th stereo I/O, stereo
speakers and SPDIF† not active, t his output will provid e the right channel of the loudspeak­er signal (the left channel will be prov ided on the Audio Ou tput No. 1).
Hardware Information
Microphone(s) Audio Input(s) Audio Outputs
Signal type Balanced Unbalanced
Socket XLR-F RCA/phono
Input impedance
2400 W
(pin 2–3)
10 kW
Output impedance
680 W
Max input level when set to min. input level
83 mVpp 15.5 Vpp
Max output level when set to max. output level
15.5 Vpp
Max input level when set to max. input level
6.2 mVpp 1.2 Vpp
Max output level when set to min. output level
1.2 Vpp
Gain range 22.5 dB (16 steps of 1.5 dB)
Phantom power 24 V ± 5 %
Phantom power resistor pin 2
1200 W
Phantom power resistor pin 3
1200 W
Max phantom power current
12 mA
XLR pin-out
External view of socket
PIN 1: Gnd
PIN 2: Hot
PIN 3: Cold/neutral
12
3
RCA pin-out
External view of socket
GNDSignal
Use Audio Output No. 1 to provid e a mixed signal of audio from far end and local external devices connected to inp ut 3 & 4 in addition to d ial tones.
This outpu t should be co nnected to the local loudspeaker system, whic h may, or may not, include th e TANDBERG Digital Natur al Audio Module.
For systems c ongured wi th stereo
speakers and SPDIF† active, the left and right channel of the loudspeaker sig nal will
both be provided on this o utput.
For systems c ongured wi th stereo
speakers and SPDIF† not active, t he left channel of the lou dspeaker sig nal will be prese nt on this outp ut. The rig ht loudspeaker channel will b e provide d on Audio Outp ut No. 2.
SPDIF (Sony/Philips Digital Interface)
is used by the Digital Natural Audio module.
Stereo Settings
Settings Output Response
Out 1 mode Stereo
I/O mode
Stereo
speakers
Audio Out 1 Audio Out 2
Analogue Off Off Loudspeaker mono VCR
Analogue Off On Loudspeaker L
Loudspeaker R
Analogue On Off Loudspeaker mono VCR
Analogue On On Loudspeaker L Loudspeaker R
SPDIF Off Off Loudspeaker mono VCR
SPDIF Off On Loudspeaker L & R VCR
SPDIF On Off Loudspeaker mono VCR
SPDIF On On Loudspeaker L & R VCR
Tip! Audio signal levels
expressed in volts and dBu can be found overleaf.
NoTe! Audio inputs 3 &
4 are referred to as Line
input 1 & 2 in the API.
Tip! Unused, but connected
audio inputs should be set to Off to avoid unwanted audio/noise.
Audio Sockets
22
D 138 87.08 MAY 2008
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Interfaces and Sockets – Codec 3000 MXP
Audio Inputs 3 & 4
Signal levels
Signal
levels
Clipping levels Nominal
level
Input
menu
level
setting
[dB] [Vpp] [dBu] [dBu]
0.0 15.5 17.0 –1.0
1.5 13.0 15.5 –2.5
3.0 11.0 14.0 –4.0
4.5 9.2 12.5 –5.5
6.0 7.8 11.0 –7.0
7.5 6.5 9.5 –8.5
9.0 5.5 8.0 –10.0
10.5 4.6 6.5 –11.5
12.0 3.9 5.0 –13.0
13.5 3.3 3.5 –14.5
15.0 2.8 2.0 –16.0
16.5 2.3 0.5 –17.5
18.0 2.0 -1.0 –19.0
19.5 1.6 -2.5 –20.5
21.0 1.4 -4.0 –22.0
22.5 1.2 -5.5 –23.5
Microphone Inputs 1 & 2
Signal levels
Signal
levels
Clipping levels Nominal
level
Input menu
level
setting
[dB] [mVpp] [dBu] [dBu]
0.0 83.0 –28.4 –46.4
1.5 69.8 –29.9 –47.9
3.0 58.8 –31.4 –49.4
4.5 49.4 –32.9 –50.9
6.0 41.6 –34.4 –52.4
7.5 35.0 –35.9 –53.9
9.0 29.4 –37.4 –55.4
10.5 24.8 –38.9 –56.9
12.0 20.8 –40.4 –58.4
13.5 17.5 –41.9 –59.9
15.0 14.8 –43.4 –61.4
16.5 12.4 –44.9 –62.9
18.0 10.4 –46.4 –64.4
19.5 8.8 –47.9 –65.9
21.0 7.4 –49.4 –67.4
22.5 6.2 –50.9 –68.9
Audio Outputs 1 & 2
Signal levels
Signal levels
Absolute max output
level
Nominal
level
Input menu
level
setting
[dB] [Vpp] [dBu] [dBu]
0.0 1.2 –5.5 –23.5
1.5 1.4 –4.0 –22.0
3.0 1.6 –2.5 –20.5
4.5 1.9 –1.0 –19.0
6.0 2.3 0.5 –17.5
7.5 2.8 2.0 –16.0
9.0 3.3 3.5 –14.5
10.5 3.9 5.0 –13.0
12.0 4.6 6.5 –11.5
13.5 5.5 8.0 –10.0
15.0 6.5 9.5 –8.5
16.5 7.8 11.0 –7.0
18.0 9.2 12.5 –5.5
19.5 11.0 14.0 –4.0
21.0 13.0 15.5 –2.5
22.5 15.5 17.0 –1.0
Default levels are denoted as follows:
–31.4
NoTe! The input clipping levels and
the absolute max output levels all assume sinusoidal signals for the dBu values.
Tip! To convert dBu values to dBV,
subtract 2.2 dB from the dBu value.
example: –10 dBu => –12.2 dBV
Audio inputs 3 & 4
NoTe! Audio inputs 3 & 4 are referred
to as Line input 1 & 2 in the API.
Audio signal levels in Vpp and dBu
Microphone inputs 1 & 2
Audio outputs 1 & 2
23
D 138 87.08 MAY 2008
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Interfaces and Sockets – Codec 3000 MXP
Single
S-video output
Mini-DIN socket
S-video input
Mini-DIN socket Aux. camera
Single Dual
Composite video output
RCA sockets
Composite video input RCA sockets
Doc. camera VCR
PC DVI-I input sockets
(Digital Video Interface,
Integrated digital
and analogue)
DVI output
NoTe! The system
will automatically adapt to a PAL or NTSC input.
DVI-I Pin-out
Pin Assignment Pin Assignment Pin Assignment
1 T.M.D.S. Data 2– 9 T.M.D.S. Data 1– 17 T.M.D.S. Data 0–
2 T.M.D.S. Data 2+ 10 T.M.D.S. Data 1+ 18 T.M.D.S. Data 0+
3 T.M.D.S. Data 2/4
Shield
11 T.M.D.S. Data 1/3
Shield
19 T.M.D.S. Data 0/5
Shield
4 T.M.D.S. Data 4– 12 T.M.D.S. Data 3– 20 T.M.D.S. Data 5–
5 T.M.D.S. Data 4+ 13 T.M.D.S. Data 3+ 21 T.M.D.S. Data 5+
6 DDC Clock 14 +5 V power 22 T.M.D.S. Clock
Shield
7 DDC Data 15 GND
(return for +5 V, HSync and Vsync)
23 T.M.D.S. Clock+
8 Analogue Vertical
Sync
16 Hot plug detect 24 T.M.D.S. Clock–
C1 Analogue Red C2 Analogue Green C3 Analogue Blue
C4 Analogue
Horizontal Sync
C5 Analogue GND
(analogue R, G & B return)
DVI-I pin-out
Note: TANDBERG s upports DVI- D
Single -Link, DV I-A an d DVI-I Sin­gle- Link format cables.
DVI- D cables tr ansmit digit al T.M.D.S. signals, DVI-A cables transmit a nalogue VGA signals and DVI- I cables c an transmit either digital or analo gue signals.
If your DVI cable is not long enough, use extension ca bles. Observe, however, that the maximum c able leng th should not exceed 5 m to avoid quality loss.
Formats supported on DVI-I out:
SVGA (800 × 600) 75 Hz XGA (1024 × 76 8) 60 Hz SXGA (1280 × 1024) 60 Hz HD720p (1280 × 720) 50 Hz, 6 0 Hz WXGA (1280×768) 6 0 Hz
Formats supported on DVI-I in:
SVGA (800 × 600) 60 Hz, 72 Hz , 75 Hz, 8 5 Hz XGA (1024 × 76 8) 60 Hz, 70 Hz, 75 Hz SXGA (1280 × 1024) 60 Hz HD720p (1280 × 720) 50 Hz, 6 0 Hz
Levels
Composite: 1 Vpp, 75 W
S-Video (Y/C):
Y: 1 Vpp, 75 W C (PAL): 0.3 Vpp, 75 W C (NTSC): 0.28 Vpp, 75 W
Do as follows to get WXGA:
1 VGA Out Quality must be set to Auto. 2 VGA Monitor Format must be set to Wide. 3 PC Picture Format must be set to Normal.
If you are using TANDBERG supplied monitors this will give WXGA out when displaying graphics.
If non-TANDBERG provided displays are used, you must in addition execute the command:
xConguration Video Outputs AllowWXGA: On
Video Sockets
GND
RCA pin-out
External view of socket
Signal
S-video Mini-DIN pin-out
External view of socket
Pin 1: Ground (Luminance)
Pin 2: Ground (Chrominance)
Pin 3: Luminance (Y)
Pin 4: Chrominance (C)
1
3
4
2
24
D 138 87.08 MAY 2008
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Interfaces and Sockets – Codec 3000 MXP
Camera Socket
S-video Mini-DIN pin-out
External view of socket
Pin 1: Ground (Luminance)
Pin 2: Ground (Chrominance)
Pin 3: Luminance (Y)
Pin 4: Chrominance (C)
1
3
4
2
Camera Connect the camera here. Use
a TANDBERG 3000 WAVE II Camera cable or similar.
To connect a non-TANDBERG camera use the split cable supplied. This cable has a female D-SUB and an S-video
connector in one end and a male D-SUB connector in the other end.
9-pin D-SUB pin-out
External view of socket
69
1
5
TANDBERG 3000 WAVE II
Camera cable pin-out
SIGNAL NAME
RJ-45 S-VIDEO DSUB
+12V DC 8 4
GND 7 5
+12V DC 3 4
TXD 4 3
RXD 5 2
GND 6 5
GND 2 5
+12V DC 1 4
Y-GND 1 8
C_GND 2 1
Y 3 9
C 4 6
NC 7
Split cable for non­TANDBERG WAVE II cameras
Non-TANDBERG
Camera cable pin-out
SIGNAL NAME
DSUB
Camera
S-VIDEO DSUB
Codec
+12V DC 1 4
GND 2 5
+12V DC 3 4
TXD 4 3
RXD 5 2
GND 6 5
GND 7 5
+12V DC 8 4
Y-GND 1 8
C_GND 2 1
Y 3 9
C 4 6
NC 7
TANDBERG HD 3000 Camera cable pin-out
SIGNAL NAME
RJ-45 DSUB
+12V DC 1
Twisted
pair
4
GND 2 1
Rx 3
Twisted
pair
2
TX 4 6
LVDS+ 5
Twisted
pair
9
LVDS– 6 3
GND 7
Twisted
pair
5
+12V DC 8 4
RJ-45 Connector pin-out
Cable is Category 7.5/ Class F AWG24. Extreme care should be taken if you choose to make your own version of this cable!
Camera sid e
Codec sid e
Tip! Wherever applicable, the use
of Category 5 cabling or better is strongly recommended! For HD camera applications, however, Category 7.5 is required.
25
D 138 87.08 MAY 2008
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Interfaces and Sockets – Codec 3000 MXP
RJ-45 Connector pin-out ISDN BRI interface. ISDN I.420
(RJ-45 Jack) Basic Rate Interface S/T (2B + D), 128 kbps per ISDN I/F. Use any standard BRI cable to connect the Codec to BRI.
S/T Interface
BRI Pin out
Pin 3 TX+
Pin 4 RX+
Pin 5 RX–
Pin 6 TX–
ISDN BRI sockets (not applicable to 3000 MXP Net)
Tip! Wherever applicable, the use
of Category 5 cabling or better is strongly recommended! For HD camera applications, however, Category 7.5 is required.
26
D 138 87.08 MAY 2008
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Interfaces and Sockets – Codec 3000 MXP
V35 DTE → DCE
Pin Signal name Direction Description
1 FGND
Frame GND on equipment
11 SD(A)
Send Data / Transmit
12 SD(B)
Send Data / Transmit
13 RD(A)
Receive Data
14 RD(B)
Receive Data
15 SCR(A)
Signal Clock Receive
16 SCR(B)
Signal Clock Receive
17 SCT(A)
Signal Clock Transmit
18 SCT(B)
Signal Clock Transmit
19 GND
1
Signal GND
22 RLSD(CD)
Received Line Signal Detector / Carrier Detect
23 RLSD(GND)
1
Signal GND
24 RI
Ring Indicator
25 LOS
Loss of Signal (KG194)
26 DTR
Data Terminal Ready
1) This pin is co nnected to groun d for corre ct operations
RS449 DTE → DCE
Pin Signal name Direction Description
1 FGND
Frame GND
11 SD(A)
Send Data
12 SD(B)
Send Data
13 RD(A)
Receive Data
14 RD(B)
Receive Data
15 RT(A)
Receive Timing
16 RT(B)
Send Timing
17 ST(A)
Send Timing
18 ST(B)
Send Timing
19 GND
1
GND
20 TR(A)
Terminal Ready
21 TR(B)
Terminal Ready
22 RR(A)
Carrier Detect / Receiver Ready
23 RR(B)
Carrier Detect / Receiver Ready
24 IC
Incoming Call
25 LOS
Loss of Signal (KG194)
Frame GN D is connected to pi n 1 on DTE
1) This pin is co nnected to groun d for corre ct operations
X.21 DTE → DCE
Pin Signal name Direction Description
1 FGND
Frame GND
11 T(A)
Send Data / Transmit
12 T(B)
Send Data / Transmit
13 R(A)
Received Data / Receive
14 R(B)
Received Data / Receive
15 S(A)
Signal Element Timing
16 S(B)
Signal Element Timing
20 C(A)
Terminal Ready / Control
21 C(B)
Terminal Ready / Control
22 I(A)
Carrier Detect
23 I(B)
Carrier Detect
Net interface socket. 1 × X.21 / V.35 / RS449
with 1 × RS366 Call Control up to 2 Mbps
Note the following:
V.10 (RS423). Fo r balanced signal s a
0 = low voltage, is de ned as terminal
A positive with respe ct to terminal B.
For unba lanced si gnals a 0 = low volt-
age, is dened a s terminal positi ve
with resp ect to GND. Cable l ength
for Leased Li ne Control should not
exceed 20 m.
R S 3 6 6 . All bala nced inputs and
outputs (A and B) use balance d line
signals accordi ng to V.11 (RS 422),
while sin gle ended s ignals are in
accord ance with V.10 (RS423). The
0 = low voltage d enitions are the
same as for V.10 ab ove. Max cable
lengt h, as for V.10 above.
X.21. Signals are as for RS 366 above.
Cable length should not exceed 50 m.
RS366 DTE → DCE
Pin Signal name Direction Description
1 FGND
Frame GND
2 DPR
Digit Present
3 ACR
Abandon Call & Retry
4 CRQ
Call Request
5 PND
Present Next Digit
6 DLO
Data Line Occupied
7 NB1
Digit Bit 1
8 NB2
Digit Bit 2
9 NB4
Digit Bit 4
10 NB8
Digit Bit 8
HD D-SUB 26 pin-out
External view of socket
91
10 19
18 26
Net socket (applies to 3000 MXP Net only)
27
D 138 87.08 MAY 2008
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Interfaces and Sockets – Codec 3000 MXP
Ethernet LAN (RJ-45 Jack) interface (10/100 Mb).
Up to 4 or 6 Mbps, depending on the bandwidth op­tion installed. Use any standard Ethernet cable to connect the Codec to a LAN.
If no LAN is available and the Codec is connected directly to a computer, use a crossover cable.
USB interface.
For future use.
Tip! If you connect your Codec directly to a PC, make sure you set up
the system to use static TCP/IP settings. There will be no DHCP server controlling the little LAN created by the computer and the Codec. When
conguring a back-to-back connection between the PC and the Codec,
make sure both static IP addresses exist on the same subnet.
Data port
Pin Signal name Direction
1 Carrier
detect, CD
From DCE
2 Receive data,
RXD
From DCE
3 Transmit
data, TXD
To DCE
4 Data terminal
ready, DTR
From DCE
5 Signal GND
6 Data set
ready, DSR
From DCE
7 Ready to
send, RTS
To DCE
8 Clear to
send, CTS
From DCE
9 Ring
indicator, RI
From DCE
Data port. The Data port is
implemented as a Digital Circuit Terminating Equipment (DCE).
9-pin D-SUB pin-out
External view of socket
Ethernet cable
1 ---------- 1
2 ---------- 2
3 ---------- 3
6 ---------- 6
1 1
2 2
3 3
6 6
Wiring diagram standard cable
Wiring diagram
crossover cable
PC card. Wireless LAN PC card
may be inserted here.
RJ-45 Connector pin-out
Network Interface Sockets
Tip! Wherever applicable, the use
of Category 5 cabling or better is strongly recommended! For HD camera applications, however, Category 7.5 is required.
69
1
5
28
D 138 87.08 MAY 2008
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Interfaces and Sockets – Codec 3000 MXP
Power cord socket.
Accepts 12 V DC / 4.3 A
Power switch
CauTioN! This equipment
must be earthed!
Power Socket & On/Off Switch
We rec ommen d that you check out the TANDBE RG web s ite regularly for up dated versions of this manual:
http://ww w.tandberg.com/support/ documentation.php
Interfaces and Sockets – Codec 6000 MXP
This part of the manual provides an in-depth presentation of the rear panel sockets and interfaces of the Codec 6000 MXP, including the audio signal levels and the formats supported.
30
Interfaces and Sockets – Codec 6000 MXP
D 138 87.08 MAY 2008
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Audio sockets
Video sockets
Rear Panel Socket– and Interface Groups
Network interface sockets
Power socket
and On/Off switch
Loading...
+ 212 hidden pages