POWER BANK SPB 3000 A1
IAN 284702
POWERBANK
Bedienungsanleitung
POWER BANK
Operating instructions
GB / IE / NI Operating instructions Page 1
DE / AT / CH Bedienungsanleitung Seite 25
Before reading, unfold the page containing the
illustrations and familiarise yourself with all functions
of the device.
Klappen Sie vor dem Lesen die Seite mit den
Abbildungen aus und machen Sie sich anschließend
mit allen Funktionen des Gerätes vertraut.
2,
2,
SPB 3000 A1
GB
│IE│
NI
│
1 ■
Contents
Introduction ........................3
Information concerning these operating instructions . 3
Copyright ............................... 3
Notes on trademarks ...................... 4
Intended use ............................. 4
Warnings used ........................... 5
Safety ............................6
Basic safety guidelines ..................... 6
Descriptions of components ...........9
Start-up ...........................9
Check scope of delivery .................... 9
Disposal of packaging materials ............10
Charging the Power Bank ..................11
Checking the charge level .................12
Handling and operation .............13
Charging mobile devices with the Power Bank . 13
Troubleshooting ...................14
Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . .15
Storage when not in use ............15
SPB 3000 A1
■ 2
│
GB
│IE│
NI
Disposal ..........................16
Disposal of the appliance. . . . . . . . . . . . . . . . . . 16
Appendix .........................17
Technical data .......................... 17
Notes on the EU Declaration of Conformity ....18
Kompernass Handels GmbH warranty ....... 18
Service ................................22
Importer ............................... 22
SPB 3000 A1
GB
│IE│
NI
│
3 ■
Introduction
Information concerning these operating
instructions
Congratulations on the purchase of your new appliance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information on safety, usage
and disposal. Before using the product, familiarise
yourself with all handling and safety guidelines. Use
the product only as described and for the range of
applications specified. Keep these operating instructions in a safe place. Please also pass these operating
instructions on to any future owner.
Copyright
This documentation is protected by copyright.
Any copying or reproduction, including in the form
of extracts, or any reproduction of images (even in
a modified state), is permitted only with the written
authorisation of the manufacturer.
SPB 3000 A1
■ 4
│
GB
│IE│
NI
Notes on trademarks
USB® is a registered trademark of USB Implementers
Forum, Inc.
All other names and products may be trademarks or
registered trademarks of their respective owners.
Intended use
This device is an information technology device and
is intended exclusively for charging mobile devices
that are charged via a USB port as standard.
The appliance is not intended for any other purpose,
nor for use beyond the scope described. This device
is not intended for use in commercial or industrial
environments. The manufacturer accepts no responsibility for damage caused by failure to observe these
instructions, improper use or repairs, unauthorised
modifications or the use of unapproved replacement
parts. The risk shall be borne solely by the user.
SPB 3000 A1
GB
│IE│
NI
│
5 ■
Warnings used
The following warning notice types are used in these
operating instructions:
DANGER
A warning notice at this hazard level
indicates an imminently hazardous
situation.
Failure to avoid this hazardous situation could
result in severe injuries or even death.
► Follow the instructions in this warning notice to
avoid the risk of serious injuries or death.
CAUTION
A warning notice at this hazard level indicates a potential for property damage.
Failure to avoid this situation could result in property
damage.
► Follow the instructions in this warning notice to
prevent property damage.
NOTE
► A note provides additional information that will
assist you in using the appliance.
SPB 3000 A1
■ 6
│
GB
│IE│
NI
Safety
In this section, you will find important safety instructions for using the appliance. This appliance complies with statutory safety regulations. Improper use
may result in personal injury and property damage.
Basic safety guidelines
■ This device may be used by children aged 8 years
and above and by persons with limited physical,
sensory or mental capabilities or lack of experience
and knowledge, provided that they are under supervision or have been told how to use the device
safely and are aware of the potential risks. Children must not play with the appliance. Cleaning
and user maintenance tasks may not be carried
out by children unless they are supervised.
■ Check the appliance for visible external damage
before use. Do not operate an appliance that has
been damaged or dropped.
■ Always place the device on a stable and level
surface. It can be damaged if dropped.
■ Do not expose the device to direct sunlight or
high temperatures. Otherwise it may overheat
and be irreparably damaged.
■ Do not place the product near heat sources such
as radiators or other heat-generating devices.
SPB 3000 A1
GB
│IE│
NI
│
7 ■
■ Keep the appliance away from open flames
(e.g. candles) at all times.
■ The device is not designed for use in rooms with
high temperatures or humidity (e.g. bathrooms)
or where there is excessive dust.
■ Never expose the device to extreme heat. This
particularly applies to storage in a car. Extreme
temperatures can occur in car interiors and glove
compartments during long periods of immobilisation. Remove electrical and electronic devices
from the vehicle.
■ Do not use the device immediately after moving it
from a cold room to a warm room. Always allow
the device to acclimatise before switching it on.
■ Never open the housing of the appliance.
There are no user-serviceable or replaceable
components inside the device.
■ Do not make any unauthorised modifications or
alterations to the device.
■ All repairs must be carried out by authorised
specialist companies or by the Customer Service
department. Failure to make proper repairs may
put the user at risk. It will also invalidate any
warranty claims.
SPB 3000 A1
■ 8
│
GB
│IE│
NI
■ Do not expose the device to water spray or dripping
water, and do not place liquid-filled objects such as
vases or open drink containers on or near the device.
■ Switch the device off immediately and disconnect
any connected charging cables from the device
if you smell fumes or notice any smoke. Have the
device checked by a qualified specialist before
using it again.
■ If you are using a USB power supply, the mains
socket used must always be easily accessible so
that the USB power supply can be quickly disconnected from the socket in a hazardous situation.
You should also observe the operating instructions
for the USB power supply.
■
DANGER! Mishandling the batteries can cause
fires, explosions, leakages or other hazards!
Do not throw the device into a fire, since the integrated battery may explode.
■ Pay attention to any usage restrictions or prohibi-
tions for battery-powered appliances in locations
with specific hazard risks, such as petrol stations,
aircraft, hospitals etc.
■
DANGER! Do not allow children to play with
the packaging material! Keep all packaging
materials out of the reach of children.
Risk of suffocation!
SPB 3000 A1
GB
│IE│
NI
│
9 ■
Descriptions of components
(See fold-out page for illustrations)
Power Bank SPB 3000 A1
microUSB charging port (input)
USB port (output)
ON/OFF button
Charge level LEDs
Charging cable (USB to microUSB)
Operating instructions (Symbol image)
Start-up
Check scope of delivery
(See fold-out page for illustrations)
The scope of delivery includes the following
components:
▯ Power Bank SPB 3000 A1
▯ Charging cable
▯ These operating instructions
♦ Remove all parts of the device from the packaging
and remove all packaging materials.
SPB 3000 A1
■ 10
│
GB
│IE│
NI
NOTE
► Check the package for completeness and for
signs of visible damage.
► If the delivery is incomplete or damage has
occurred as a result of defective packaging or
during transport, contact the Service hotline
(see chapter entitled Service).
Disposal of packaging materials
The packaging protects the device from
damage during transport. The packaging
materials have been selected for their
environmental friendliness and ease of
disposal, and are therefore recyclable.
Returning the packaging into the material cycle conserves raw materials and reduces the amount of
waste generated. Dispose of packaging materials
that are no longer needed in accordance with
applicable local regulations.
SPB 3000 A1
GB
│IE│
NI
│
11 ■
Charging the Power Bank
Before using the Power Bank, the integrated battery
must be fully charged.
CAUTION
► The Power Bank must never be charged and
used for charging an external device at the
same time.
► Due to the high battery capacity and bearing
in mind the charging time, the power bank must
be charged using a USB mains adapter.
► Use only a USB mains adapter with an output
voltage of 5V and an output current of at least
2.1A to charge the power bank.
► Use only the supplied charging cable
to
charge/discharge the power bank!
► Always disconnect the charging cable after
charging/discharging!
♦ Connect the USB plug of the charging cable
to a suitable USB power supply (not supplied).
♦ Connect the microUSB plug of the charging cable
to the microUSB charging port on the
Power Bank. An estimate of the charge level is
shown by means of the charge level LEDs .
SPB 3000 A1
■ 12
│
GB
│IE│
NI
LED display Charge level
One LED is flashing < 20%
One LED is on,
the second LED is flashing
20–49%
Two LEDs are on,
the third LED is flashing
50–74%
Three LEDs are on,
the fourth LED is flashing
75–97%
All LEDs are on 98–100%
Checking the charge level
You can also check the charge level of the Power
bank when it is not charged or is being used for
charging.
♦ Press the ON/OFF button briefly. The LEDs
show the current charge level of the Power bank
for about 30 seconds.
LED display Charge level
All LEDs are on 98–100%
Three LEDs are on 75–97%
Two LEDs are on 50–74%
One LED is on 20–49%
One LED is flashing < 20%
All LEDs are off 0%
Loading...