Silvercrest SFR 2.4 A1 User Manual
PERSONAL CARE
6
Shaver SFR 2.4 A1
Shaver
Operating instructions
KOMPERNASS GMBH
BURGSTRASSE 21 · D-44867 BOCHUM
www.kompernass.com
ID-Nr.: SFR2.4A1-06/10-V2
IAN: 38018
SFR 2.4 A1
w
1
22
3
4
5
q
7
0
9
8
6
Content Page
Intended Usage 2
Safety instructions 2
Items supplied 2
Description of the appliance 3
Technical Data 3
Shaving without the power cable 3
Shaving using the power adapter 4
Intended purpose 4
Shaving..............................................................................................................................................4
Trimming ............................................................................................................................................5
Cleaning and care 5
Dry cleaning .....................................................................................................................................5
Wet cleaning.....................................................................................................................................5
Maintenance.....................................................................................................................................6
Changing the cutter heads ..............................................................................................................6
Storage 6
Disposal 7
Warranty and Service 7
Importer 8
Read the operating instructions carefully before using the device for the first time and preserve this booklet
for later reference. Pass this manual on to whoever might acquire the device at a future date.
- 1 -
SHAVER
Intended Usage
This appliance is intended exclusively for shaving and
trimming human hair. Do not use it in commercial or
industrial applications.
Safety instructions
• This appliance is not intended for use by individuals
(including children) with restricted physical,
physiological or intellectual abilities or deficiences
in experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
appliance is to be used.
• Children should be supervised to ensure that they
do not play with the appliance.
• To avoid unnecessary risks, arrange for damaged
plugs, power cables and adapters to be exchanged
by Customer Services forthwith.
• Should the razor become damaged, to avoid
unnecessary risks arrange for it to be repaired by
an authorised specialist or Customer Services.
NEVER submerse the razor and the power
adapter in water or other liquids. This would
cause irreparable damage to the appliance.
NEVER use the appliance whilst in the bath or
under the shower. Risk of electric shock!
• Do NOT take the appliance into use if there is visible damage to either the appliance itself or the
power cable. Injury hazard!
To avoid the risks of fire
or injury
• Use only the original accessory parts for this appliance. Other accessories may not meet the safety
requirements.
• Discontinue using the appliance if there is visible
damage to the cutter heads or if the cutter heads
suddenly become hot.
:
Attention!
ALWAYS disconnect the razor from the power adapter
before cleaning it with water! There is a risk of receiving an electric shock!
Note:
The installation of a residual current circuit breaker
with a rated tripping current of no more than 30 mA
offers further protection. Arrange for the installation
to be carried out ONLY by a qualified electrician.
Items supplied
Electric razor
Mains adapter
Protective cap
Cleaning brush
Storage case
Operating instructions
After the unpacking, remove all wrapping materials
and protective foils from the appliance. Check to ensure that all listed items have been supplied.
- 2 -
Description of the appliance
1 Cutter foil retainer
2 Release tabs
3 Locking button
4 On/Off switch
5 Charge-LEDs
6 Socket
7 Storage case
8 Brush
9 Mains power adapter
0 Connection plug
q Long hair trimmer
w Protective cap
Attention! Appliance Damage!
NEVER use the razor in the bathtub or shower. This
could irreparably damage the appliance.
This razor can be used without the power cable. In
this case, you must charge it before the
about 14 hours.
1. Check to ensure that the appliance is switched off.
2. Insert the connector plug 0 into the socket 6
on the razor. Pay heed to the correct polarity:
The guide pillar in the socket 6 must grip the guide
rail on the connector plug 0. If it does not, the
connector plug 0 cannot be inserted.
3. Connect the plug with a mains power socket. The
batteries are being charged.
ffiirrsstt
use for
Technical Data
Mains adapter
Input voltage: 100 - 240 V
50/60Hz
Output Voltage: 4 V 400 mA
Protection class: IPX4
Electric razor
Input voltage: 4 V 400 mA
–
Batteries : 2 x AAA, Ni-MH
Protection class: IPX4
~
+
Shaving without the
power cable
Note:
On to the first usage, there could be production related oil residues on the cutter foil. Wipe them off with
an absorbant and lint-free cloth.
Note:
To optimise the life of the batteries, if possible do not
interrupt the charging process until the batteries have
been fully charged.
Furthermore, it can happen that if you interrupt the
charging process, the charge LEDs 5 will not indicate the correct load capacity of the battery's!
The charge LEDs 5 indicate to what extent the ap-
pliance is charged: The more charge LEDs 5 there
are that glow permanently, the higher the current
charge is. When the appliance is fully charged (from
a complete discharge, this will be after about 8
hours), remove the connection plug 0 from the
socket 6 and disconnect the power adapter 9 from
the mains power supply. The razor can now be used
without the power cable.
Note:
The full charging process after complete discharge
of the batteries takes approx. 8 hours. You can then
use the razor for approx. 60 minutes.
- 3 -
Loading...